Комментарии:
I've got shortie vids on my channel of me installing the oem dash top in my 04 Dodge 1500, If any is interested in watching them. Rated PG due to MATURE LANGUAGE.
ОтветитьThat would be 100 foot radius, 200 diameter.
Ответить🥃🇨🇦cool tool. What’s the operating temperature range. Will it work in -40 temps.
ОтветитьZip level is the brand to buy folks
ОтветитьThe kid sure ain’t shy in the bedroom 😂😂
Ответитьif you use a drone then the oil line would be safe in the air, hehehe
ОтветитьStanley tools made the Speed level about 20 years ago worked on a gas system very good for doing fall on drain pipes
ОтветитьComment
ОтветитьI wish you were in Michigan Stan..I have to find an entity here to take care of a pretty steep ravine with a pond drying up at the bottom. Which is now all muck and cattails. The cement deck, under the wood deck is separating. It’s now about 2 1/2” separated…anyways, thanks for the vids Sir
ОтветитьYou can go higher with laser level. Just ass inches or feet inches that your missing and use stick upsid down and use bottom if stick for mark 👍🏽
ОтветитьGreat video. Another flat earth argument 👍
Ответитьif you wanna simplefy the math just use a tape measure on the laser rod for elevations. Don't need to count anything.
ОтветитьI really like your channel but why so many ads 🤔
ОтветитьHow do you know your holding it straight up and down (plumb)
ОтветитьThank you for another interesting video Stanley! We have been using Topcon RLH4C lasers for several years. Replacing the ls-80 receiver with a LS-100D receiver was a significant improvement for us. The LS-100 receiver shows the difference in actual digits (for us in millimeter), as well as displaying green, red and yellow led lights for level, above and below, respectively. Getting a grade rod that allows for extension downwards and not only upwards also helps. First you can attach the receiver to the final level on the rod and then extend the rod downwards for the excavation and move it upwards for the gradual build up of material.
ОтветитьI love my TOPCON, but I've never figured out how everything is supposed to go back into the case.
ОтветитьCool
ОтветитьHello Stanley can you please visit the Massimo motor facility in Garland Texas USA???
ОтветитьCongratulations to Joey! I think I would prefer the laser.
Ответить✊✊✊✊👍😎🏴☠️🇬🇧
ОтветитьWhere’s a good place to purchase the Topcon Laser?
Ответитьlove the vids..
ОтветитьHey Stan how many license do you hold.
ОтветитьStan I am looking for a snow blower and I need some advice. I’m looking for a heavier residential snow blower I have three in mind and I was curious in your opinion on them since you’ve tested so many I was looking at the ego 2 stage snow blower,the husqvarna st224, and the toro power max 826.are these good ones or should I keep looking are there any brands that you like that are good for residential driveways
Ответитьur truck got stolen!!!
ОтветитьWhat ya think about California banning small engines including lawnmowers weed eaters generators and golf carts. With electric mowers out now you think other states will follow
ОтветитьQuality for sure
ОтветитьThats a nice looking skidsteer which is your favorite brand now? If you could only get one would you rather have a skidsteer or excavator? Awesome video man.
ОтветитьI'm not sure where to ask this. One of Stan's "show" videos had an extreme Overland RV truck. Might one of you know which video it is in?
ОтветитьHigh on the pole, low in the hole
ОтветитьI've been using the Zip Level since 2012. One of my colleague's picked up a Smart Level in 2019. Was very disappointed sent it back got hit with a restock fee and shipping ended up losing over $200.00. Last year he purchased the Zip Level.
Zip Level takes all the guess work out. Highly recommend this product.
Great video Stan 🇺🇲
ОтветитьWe use a TopCon dual slope and I love it. Doing a job now where we need 1.8% in both directions and I can set the thing up one time and shoot the whole job. We do a lot of ADA stalls and the dual slope makes setting forms so much quicker and more accurate. Dual slope with a telescoping tripod is hard to beat for what we do.
Ответитьinstead of a normal grading rod I use a "laser grading rod" (that has a two coloured section with plus and minus numbers from a centered 0 position printed on).
Makes it easy enough to simply read out the difference for me (using metric here in Austria by the way so no fractions... not used to them to be honest)
And I can use it in vertical laser position as well to check a distance from a wall before (for example) building store shelfing in the store.
However this tool is a nice system to work inside of areas you can't use lasers and especially around corners when you have to get the whole storage rack leveled out for example... just too pricy for the use I have for me as I am doing this as part of my job in the store and not to earn money with 😏
Clear hose level it's way cheaper and more accurate of any laser levels..
ОтветитьI love them Milwaukee jackets!!!
ОтветитьI know laser are like 1/2" accurate which I'm most cases is good enuf
ОтветитьFluid power
ОтветитьGotta get him to whip it out
ОтветитьGreat work and thanks for sharing this with us take care
ОтветитьThat smart level is a water level with a transducer that measures delta’s
ОтветитьDef an interesting comparison!
ОтветитьBecause of the (no) sound and that I don't have to calculate I like the smart laser!
ОтветитьWe use 2 Smart Levels like shown here. It's essential to store them upright with the hose angled down off the reading brick, otherwise air bubbles will enter the hose and throw off the measurements and make the measurements jumpy. Bleeding the bubbles is also a pain. Keep the hose angled down in the case, with the case up so the handle is on top. Nice video!
ОтветитьI use a u level which is a smart level with Unilock branding. It’s great for estimates and setting base for pavers. It’s also great to use around corners, you don’t need line of sight. We also use it a lot on decks for setting footings and posts
ОтветитьIf you can't move a tripod or do simple math you're not much of a contractor and I don't think it's ideal to be dragging a line through a job site especially if there's no grass and the conditions are wet and muddy not very practical.
ОтветитьIf you're working with other contractors and they're using equipment where you need to shoot grades everybody has to stop what they're doing so that the cable doesn't get crushed
ОтветитьCan get a 100' "smart level" for 20$ Clear tubing and colored water...
ОтветитьSmart level better than laser ?
ОтветитьGreat Video! In the market for a smart level, and this was very helpful.
Ответить