7mm Rem Mag 195 gr EOL Velocity

Wow…..

That's hot for a 200 gr bullet. I do love 7 mag

Scope way to high. That's ridiculous

I’ve fitted my xbolt 7mm rem mag with a proof 1/8” TR and load this bullet but haven’t checked the speed. It shoots 1/2” groups at 100 yards. What powder and how many grains you using?

You got any 280 AI uploads, R. Dubb?

No everyone reloads

I hope other rifle manufacturers realize you don't have to follow saami specs for rifle twists. They can easily be modified.

7 rem mag was what my dad and grandpa always said was the sweet spot of do everything rounds

Let's see the 7 Backcountry do that.

Damn you, I had just thought I was set on a 7PRC also

What is the accuracy of that 1:8 twist with those 195g bullets

195 grains at over 3000 fps. No pressure signs. Reject modernity, return to 7mag.

Imagine the weight that would have if it was a flat base, short ogive, wide meplat design for deep woods hunting. At that length it would be like 230-240 grains or heavier for full diameter and easily 220+ for a bore riding design...I need to design and make my own bullets. I have ideas. I want to know if they will work as I think they will.

195gr 7mm @ 3000+ FPS IS FKN HOT 🔥, !!!!!

How long is that barrel? I know they made a 26 inch. Thats still pretty insane

Holy Hanna 195 going over 3000 fps …I like it

They need to make a 300 rum that fits a magazine correctly with heavier 30 caliber ammunition. If they did that you could say goodbye to the 300 PRC

All the guys that went out and bought a 7prc crying 😭

Aint not'n wrong with the 7mm Rem Mag. Thank you Les Bowman and Mike Walker!

So, what is the oal of this cartridge?

Honestly, that loadout right there will beat most off the shelf 300 WinMag cartridges. I’m sure the pricing is still roughly 2 dollars up to five dollars per shot, but you have to pay to play. If my math is correct it’s actually producing more kinetic energy than a 180 grain 300 with bag out of a 24 inch barrel.Although I would not say that bullet is adequate for massive kinetic energy dump. It would probably be superior against steel or any type of body armor after 500 yards.

That’s very impressive!

Call me intrigued...this might be my next rifle

If it was zero pressure, the bullet would not come out of the case don’t be stupid. 😂

What is your impression of the matte bluing on the xbolt barrel?

PRECISION SHOOTING Magazine had an article concerning "Dumping Vs Swirling" the powder into the case. From then on i've tilted my case / funnel and swirled the powder against the side of the funnel. ☆

WOW! Right in the sweet spot!
Great Rifle!

Won’t the 195 elite hunters also stabilize in a 1:9 twist?

😮 really all that work, when you can get shells right off the shelf.. with an inch and a half of gap between your optic and bore-line... Accurate isn't really your big goal is it?

What kind of barrel do you have on there? Bull-barrel? Seems like that would shoot out that barrel in short order if it was a normal hunting barrel. Thoughts…comments?

7mm SWC & 180gr ELD-M for the win ! 🏁

(Sherman Wild Cat)

That’s a lot. How was the accuracy? I usually start at 300yds my first group then keep going further. 100yds doesn’t tell me much. I want to know what it’s doing at actual hunting distances which is for me usually always 300+yds in my 7STW.

My 7STW stabilizes the 195gr well with a 1:9 twist in a 26” Krieger 4-groove.

Well with factory 1 in 8 7mm’s who needs the prc

I have 30-06. My 4 family members have the 7 mm rem mag. I am thinking of getting the Tikia 7 mm LH bolt. What are your thoughts?

Wow, so I bought a 7 PRC for nothing

Excellent video! 3,932 ft.lbs.! Out of a 7mm Remington Magnum! What was the barrel length? Most current X-bolts are showing 26" barrels. Can you say what the propellant was?

Respect

Great ballistic coefficient

That primer got flattened. I would be okay with that, but it isn't "zero pressure."

And goes the show that the 7 mm PRC IS MOOT

Got a Sako with a 28” Bartlien barrel, 1/9 twist. It’s a hammer.

No pressure signs bulshit did you see the primer was flat that's the main indicator your pressure signs are too high

With is bullet best BC

Reloading whit IMR 4350, my friend..?

That was 3k with a 195 grain pill?
That is a serious load.

If I re barreled a tikka could I do the same or would the mag be an issue?

What is the barrel length on your Browning? Excellent video!

Love my 7mm mag and ultra mag to

What was the charge and powder to get that