Multitrack Recording Setup - Behringer X32

Great video Drew..... Thanks a lot, this would have taken me ages to figure out by myself!! gotta be the best vids out there for new users. greatly appreciated :)

How do you multitrack without using a DAW (Reaper)? Isn’t there a way to MULTITRACK on the unit?

Good evening sir i need help on how i can multi track record using the cubase software please help i followed all your instructions the PC leads the card but the i cant get the audio to the compiter am using windows.

What is the INPUTS Play section for? Is that only required for playback from the computer? If I wanted to only record a band rehearsal only and not do any playback can I skip the IPUTS Play setup?

Super complicated

Worked great with our old computer. Upgraded computer, couldn't use same software as the license had expired. Installed different DAW software and neither is recognizing our X-USB. Anyone have ideas?

Any ideas what I can do to get a hotter level into my daw? The leves when recording out via usb into the daw are always very low

Hi Drew, do I have to use all 32 channels?

Hi Drew, Great video. My question is, how do you route the signal to mix in the box and route it to livestream with effects

I’ve always wondered, how do you get good signals in your multitrack mix. I wanna have even and nice signals in my DAW. You know, at times you seem to find some signals clipping and others very low and in the end you would have to normalize or amplify them in order you mix properly. Also I wanna know how to multitrack with procession and effects, i.e if that’s possible. Any pointers or a video perhaps? Thanks

thank you soo o so much. this has been so helpful.

Thanks for the video, Can the X32 work as an inbox recorder without the DAW ...alternatively record post eq and effects etc to the DAW?

Is there a way to record the main mix via X-USB interface?

Hi, this is Leroy and I am starting to learn this board at my church and your videos have been VERY HELPFUL. My question is If I record our Sunday service on the the USB can I use that to make adjustments as long as I select the channel they are on as well as musicians?

Can you record what's coming out of the USB Player into a DAW? Let's say, a band is using a metronome/backing track launched from the usb player (L and R, so 2 channels), and I want to record that as an audio track as well, how could I do that?

I’ve been exploring the idea of simultaneous multitrack recording on two separate computers from a single X32. I have a Mac Studio for live streaming and MacBook Pro I’d like to multitrack raw audio on. Currently using Logic Pro X for both.

The reason for this desired set up is that I need to make plug-in adjustments while live streaming and can not simultaneously record audio while making those adjustments. I need a way to split the signal two ways.

Hey Drew, tha ks for the video. Can you please also do one for Wing? And how to playback for post mixing? I’m having so much issue with this in Wing

Would this be possible using Audacity?

один из немногих, кому не нужна нейросеть, что бы смотреть одновременно в кадр и на суфлер

how to make all the processing on the console affects our recording?

Drew, I'm just getting started learning to use my x32 Compact to record music and I'm having some issues getting the mixer to talk to my laptop. Hardware wise I have the x32 Compact board with one stage box to give me all 32 inputs. My laptop is running Windows 11 Home with the X-USB software installed and Reaper as my DAW. I was watching your multitrack tutorial and noticed that in Reaper under Preferences, Audio Device I do not see the X-USB as an input source. Any suggestions what I am forgetting to do to get this up and running?

Help. Great video but finding the correct x-usb driver seems impossible. Am I looking for the ASIO driver? Any help would be appreciated. I have a X32 mixer with X-USB I/F and pc running Reaper. My system shows Behringer 1-8

Hi Andrew, can you do a video how to setup midi to start/stop reaper to playback...

hello Drew, i have some issues with X-USB recording. I have made all the settings a discribed but mij Audacity detects only 2 channels of audio? Wat am i doeing wrong?

Hi Drew, great video as always! Your teaching is simple, but effective and I always lear a lot.

I've already recorded multitracks before successfully, but this weekend I recorded a set for a band and the audio files are all sped up and they're unusable. I was wondering what I might've missed; I checked the routing was correct and audio was going through, I also reinstalled the drivers for the M32Live. This hasn't happened to me before with any kind of recording. Do you know what could've been the issue? Note that my laptop is old and that's what I'm claiming created the problem.

Thanks again!

Can I set mine up with 16 I/O so I don't need to flip the record/play button in the Card menu on the X32 in order to play back the multitrack recording, or does the X-USB card only have a "one-way at a time" communication capability?

I am looking to set this up with a Windows machine. When adjusting the preferences and the Audio input I do not get X USB but rather several options. IN 3-4 (Behringer X-USB) or IN 5-6 (Behringer X-USB) or IN 1-8 (Behringer X-USB). Nothing seems to work when trying to complete the mapping. Any suggestions?

I believe I have followed all these steps, and when I have audio going through the board it is not coming up in the daw, I also tried studio one and still no luck, I’m using a Mac, is there anything that I might be missing?

My card is only being seen as 2 channels... even tho I have it set on 32 channel... any ideas?

in a DAW, Can you have all channels (dn32-live) for recording and a different sound card for playback(Effects plugins monitoring) ? for live broadcast project i am testing?

Hey Drew, another great video. I'm have my iPad connected to Aux 5 and Aux 6 (L & R), and want to send them to Reaper as well. Tried different routing changes but can't seem to get it. Have you tried this and had any luck? (I've searched for videos on-line and all are old based on previous versions of X32Edit so they're quite confusing).

Great stuff

Hey Drew I have a tube mic pre I want to use, what is the best way to introduce this into my recording setup thanks

my pc speakers output and my daw input output only lets me choose either channel 1-2 3-4 5-6 7-8 or 1-8, how do i set it to all 32 channels

Hey @Drew Brashler, question, is there a way you could do a recording where you can have the processing send to your multitrack as well?

Hi drew, can you this same video with ableton?

What if you're using your card on a windows pc and you're already sending the audio to a program like OBS for a live stream. Windows requires the card to be in 2 in 2 out mode if you want to use the audio in something other than a daw. Is multi track recording no longer an option in this case? Is there an alternate way to do it?

Thanks for your video. As always.

Hi Drew, could you please also do how to set up virtual soundcheck on the X32 using Studio One DAW? This would be much appreciated. Thanks

Hi Drew,
I've set up the X32 and Reaper twice now and it still not recording. What am I missing?

Thanks so much mighty man of God! Quick question, do you have a video on how to apply this to Studio One DAW on a iMac?…

Hi Drew,
Just got done watching how to record on my mac with Reaper. Now how do I play that back thru the system on the X32?

Hi Drew, love your videos. I have Aux in 1-4 routed to channels 17-20 on my x32 producer. How do I get the Aux 1-4 audio signal to the xusb card so I can see them as channel s 17-20 in Logic Pro?

Can we use studio one 5 or 6 ?

And if I want to save my compresor, eq, Gate etc from the x32, how is the process?
Thank you!

Incredibly helpful, thank you so much!

X-USB option isn't available on the Reaper software for me. Computer hooked up to the X32, did the routing just like you did in the video, no X-USB.
Is it available in the trial version?

BRO!!! Im loving your videos. many people are still using the x32. My local church just got the small version. I setup the p16s using your videos. Keep these videos coming buddy.

What version of reaper are you using? My routing matrix is only half of that... I'm doing something wrong.