Комментарии:
Why clean the surface if you're just going to sand it off anyway?
Ответитьfredrik reinfeldt är en idiot
ОтветитьAnd all this work had to be done most likely because someone wasn't paying attention while they were driving ...
ОтветитьWhy would you clean the plastic before sanding the plastic? That makes no sense at all!
ОтветитьTurn up the fucken music - i can still hear U talking - idiot!!
Ответитьits super
ОтветитьLooks like all those materials cost more than a used bumper?
ОтветитьThere is a much simpler approach then this method.
ОтветитьFrom the money for the tools and the 4 hours of work, plus the painting costs. It's cheaper to buy a used bumper in the same color.
ОтветитьDid he really have to and the entire bumper or could u blend it in
ОтветитьHey, I’m trying to customize a stock seat pan. It is a black plastics. I need to add some plastic to it to get the desired shape to the fender that I want. Then cover it with my leather. What do you suggest to use. I thought about using heat and plastic weld the same type of plastic and metal mesh to keep its shape so it matches and I can use staple gun with the leather. I have not tried this yet. There is fiberglass, but I don’t know how well fiberglass and this type of plastic play together. The other option is shaping a piece of wood to the desired shape. It will be easy to shape and I will be able to staple the leather to it. However, even though it will be hidden and covered by leather, I will know that it is there. I have pictures. I’m open to any suggestions because I don’t want to mess this up. I only have one.
ОтветитьAluminum body tape sure does look exactly like foil duct tape.
ОтветитьRock on brohan!!
ОтветитьWhat a waste of time and money. Id just use those melting metal clips that asian guy uses in his videos.
Ответитьis this methode only good for TPO plastic ?
ОтветитьIt's easy to see you've never done this before. At the beginning of your video you decided the clean the plastic. That made no sense because the next step was to grind off the paint. Guess what? The surface was contaminated again. Are you kidding me??
They were correct, you can't fix stupid !!
😂😂😂😂😂😂😂😂
what i learned from this video , just buy a new bumper 😓
ОтветитьNo need to touch the outside of the bumper at all,connect outer so its flush and weld the inside ,no need for tape inside
Ответитьthankyou ❤
ОтветитьThanks for the tips from your video. I'm currently trying to repair my motorcycle fairing. Both rearside plugs that plug into rubber grommets are broken and missing. I've got the gun and bits. I'm reshaping and building a couple of cheap toothbrushes to hopefully weld onto the fairing at the right depth and angle. Whether that works or not time will tell.
ОтветитьSeems most costlier and time consuming then purchasing new parts....
ОтветитьMarch 2023 👍
ОтветитьHi, very nice video, what it's the method tu repair polyurethane bumpers?
ОтветитьPlastic joint business
ОтветитьI would try it to synthwave instead of metal
ОтветитьGood job 👍🤓
Ответитьgoodwork sir, godbless
ОтветитьSuper glue and baking soda. Thank me later 👍
ОтветитьYou should of did it from the back
ОтветитьUseless
ОтветитьВсе супер, но зачем обезжиривать и сразу наждачка? Пластик не впиьует жир, можно просто наждачка и все!)
ОтветитьSo a heat gun with a narrow tip is called a welder.. ok sure.
ОтветитьTerrible music.
ОтветитьJust buy a new bumper some only cost 60 bucks some around a hundred bucks lol 😂. This is America, in third world country this is feasible. In America your shop is better off spending time on something else more lucrative. Most shop even buy a whole new section from a junkyard instead of straightening a dent to cut down labor time, and back job from imperfection. This would be good for a DIY though just for fun. I have rods from a regular plastic welder and hot air machine I use for surface mount board work. This is something that would be fun to do if the need arises
ОтветитьI think the cost of the repair will be equal to a new bumper.
ОтветитьIt took me lot of trying to learn to do it correctly . I need this for a DIY custom bumper i made . I used for melting rods pieces from the old bumper after i cleaned them because they matched the same plastic . Great video helped me a lot
ОтветитьRandom but what song is this ?😂
ОтветитьWe have fevi quick 😂
ОтветитьWould have loved to watch the whole vid.. but that head banging music was too much to bear..
ОтветитьA zip tie & a cigarette lighter works just as well 👍
ОтветитьI bought one of these and could not for the life of me, figure out how to use it. Returned it the same day.
This video explains alot. Lol.
Thanks for sharing but please change the music
Ответитьyou need to clean the plastic and then you go ahead and sand the area. Why waste cleaning material??
ОтветитьLet me get this straight, get the rod hot to achieve maximum penetration😜.
ОтветитьWhy do so many automotive sites use a stupid heavy metal soundtrack? It really detracts from the message.
ОтветитьSo much prep and finish work for a little crack.
ОтветитьLol.
ОтветитьWhy not just use a glue gun ?
ОтветитьHe said " rod penetration " huh huh huh huh..
ОтветитьHumach
Ответить