Braava Jet M6 Robot Mop Review and Threshold Feature Explanation

Jak zaznaczyłeś całą mape progiem to przejeżdża przez progi lepiej ? Czy lepiej osobno progiem zaznaczyć?

I have both the M6 and Braava Jet 240. The 240 does a better job and since it is smaller it gets into tighter places. I use the 240 for mainly bathroom, panty, mudroom and other smaller areas. The M6 runs all the larger areas. However, since the 240 does clean the floor better I do run it once a month everywhere else.

wow you made me wanna buy this product great job on the video. you explain all the little things i needed to know

I was going to break this thing, my rooms don't even have bumps in between, on the contrary, gaps. I couldn't make it cross into other rooms.... Had to create different maps, and carry this thing around. Finally, thanks for the video.

What about rooms with carpets separating the rooms? I’d like it to mop the living room, then travel over the bedroom carpet to clean the bathroom tiles.

I've been trying to wrap my head around the thresholds so many thanks. Made life easier :)

I really want iRobot to release a M7 where it had at the very least a LiDAR attached to it or a camera but preferably both. Only thing holding me back from getting a mopping robot from iRobot are the aforementioned reasons.
I've seen reviews of countless mopping robots and most of them are hybrids... which I don't really want but I am willing to buy due to there being any "good" mopping robot.
Most mopping robots I've seen just use a container on the robot itself and use gravity to soak the cloth which I'm not really into.

I like this sprayer system and I just want there to be LiDAR and/or a camera mounted option onto it and it will be the perfect mopping robot.

Overall I'm happy with mine. Just replaced the battery, bought mine February 2020. Had the wheels and tank replaced free by Irobot within the first 6 months. Still working well. The only thing I would like is an edge pass, seems to not clean well there.

I have a transition between the bedroom and bathroom. The M6 mop won't map the bathroom.

I put a transition on the whole wall, not just the doorway into the bathroom.

I've run 4 mapping runs. The mop simply will not cross the transition.

Any suggestions?

But how do you do the mapping to ad the tresholds later as my M6 can't map because it gets stuck at the tresholds?

Thanks for the insight. I’m still having an issue with transitioning. I called the manufacturer and they said my only option is to pick it up and move it from room to room. The problem is I can only run it when my son is at school. He’s autistic and it scares him when it’s on. Unfortunately, manually moving it is not an option.

My mop can’t learn the full map because of the thesholds…. Am I supposed to kick it over after it learns the first part of the map?

you can reduce video to 2 minutes and can still convery the idea about threshold and how to activate. But infect it took 12 minutes and I still don't know where to find the threshold button in the app.

JUst got mine and it won't recognize any reusable pad whatsoever. It's going back.

My dude.. you put the floor mop on your cutting board...

Sometimes my m6 still has issues going over thresholds when going back to the base all the time. Not sure how to fix this, keep getting docking issue error.

Do you have the link for the aftermarket pads you purchased?

one of the most helpful real-life videos about the bot! And not only informative, but funny... lol
Thanks a lot! I had real concerns but after watching you video, I could decide to buy one Braava Jet M6.

I just bought the Costco package. How is the threshold setting now that you've used it for months since that update?

Edit: I also hear it has a "high threshold" setting in beta now.

I stopped this video when you said you hoped your robot would spray your cat in the face with its cleaning solution.

What's your opinion about the combo Roomba S9+ and Braava m6 now that Roborock S7 MaxV Ultra was released? What do you recommend?

Finally! A video that discussed threshold detection. I've been looking for this information and you even provided a link to your other video that details it in the app. THANK YOU SO MUCH!

I’ve read reviews that say the solution leaves the tiles sticky… Anyone having this issue? If so, is there a fix?

I purchased a Braava Jet M6 last month to clean with my 6 months old Roomba i8. Thank you so much for the reviews for Roomb and Braava, both are very helpful and informative.

I have two questions, hope I could get some insights from you.
1. Today I received an email from Irobot company offering extended 2 years, ($89.99) or 4 years ($129.99) warranty for Braava M6. May I ask if it is worthwhile to purchase a warranty? If it is, which is the better choice between the 2 years vs 4 years?

2. I could not find the concentrated M6 flooring cleaning solution came with my M6, as Irobot replaces it with Bona®Hard-Surface Floor Cleaners. The Amazon users reviews I read are not all positive, most complained about sticky wood floor after they used Bona cleaning with M6. May I ask if you have the same experience? I only have tiles in my house, I am not sure if Bona will cause same sticky problem on tile flooring.

Look forward to your response, thank you in advance.

Was about to return mine over the threshold issue. Thanks 🙏🏽

I just wanna say those floors are absolutely beautiful.

Thanks so much for the video. I started my new Braava M6 while I was out running some errands this afternoon, and when I got home I discovered it never left the docking room because it got stuck on the threshold. After watching your video, I just created one big threshold over the entire first-floor map, then I tried it again. It just went over two thresholds like they were almost nothing! Woo-hoo!!!

what kind of dogs do you have

How do you map your entire floor with floor transitions? My M6 cant map all floor due to this transitions.

I have quarter round molding on all hardwood rooms. Because it doesn't to a repeat bump while turning and instead it goes at a 45 then drives forward to pivot to make the turn. So I have it always thinking a wall is carpet because right at the end when it's just about to have made the slide/pivot it speeds up the wheels which makes it drive kinda up them at like a 10-15 deg angle almost straight
My vacuum did repeat bumps and pivots to map the walls. This thing doesn't. And I'm furious for what I spent

I don't know if they got rid of this but I don't have this feature in my app....

Wondering how I can have my mop build the map first so that later on I could use the Threshold Feature. My mop won’t even attempt to get into the rooms where there’s a threshold at the entrance to build the map first, and if there’s not a thorough map, I don’t know how this feature could be helpful.

I love the cat!!!!

How did you get it to map out before? I have a threshold but I can’t set it as a threshold because there is no map but I can’t create a full map because it can access the house.

Very helpful. Thank you.

Could you tell me what you got for the aftermarket, cheaper pads?

Great video. I’m deciding between the brava and iLife 450 right now for my mom.

Where did you get your aftermarket pads? Thanks in advance.

How did you get it to map your house if it can't get back over the threshold? Mine gets stuck in the wood and cannot get back on to the tile on the mapping run, and I can't tell it there is a threshold without a map.

Does anyone know if the threshold option would allow you to go from one hard surface across the room of carpet to another hard surface?

My husband and Ihave having been fighting with the robot for weeks. Your video and explanation was incredible!!!!! Thanks!

So, the wheels are behind the mop... Very idiotic engineering. It means the wheels will mark the cleaned floor.. Like someone walking on the wet floor, right after washing it 🤦 Only people who never washed a floor can praise this product.

Purchase washable pads. Throw them in the washer.
Change the pad after every use.
Perfection.

it too slow , my t9 aivi can do better than that

What does it cost

I just purchased mine and the potential for me falling in love with it is there. However, I have several thresholds on my main floor and it is of no value to me if it is limited to one room. I'm still tweeking the threshold setting.

While mapping, does it still have carpet detaction and avoid thresholds or will it be disabled until it creates a map and then waits for me to create thresholds?