Five Woodworking Hacks - Cheap Woodworking Tips and Tricks - How To Woodworking

Hey man. My whole family (Including my young kids) love your content. Keep up the great work. 😊

Hey man. Great hacks. Thank you for sharing. 😊

Hey man, again loving these videos we watch them at the shop all the time. Barber in Portland, OR and do absolutely nothing that involves woodworking but, come get a free head shave from us @ blackbear barbers !!

Hey man, I love your videos and your work.
I used machine wax on two of my Bessey clamps, luckily only 2 as they won’t clamp anymore. I tried to clean them with acetone and even burn it off with a blowtorch but they are still slipping and won’t hold.

No to. Wood countertop

hay man, I love your videos and your work man ship. just bought a festool
sander. Where did you buy your sandpaper organizer?

Hey man! I’ve been trying to buy your bow tie jig, but your web shop doesn’t allow shipping to Sweden. What’s up with that?

HEY MAN.. wonderful tips, thank you.. I love your instruction

Hey man! Good tips!

Hey man… great video!!!!

Hey man! How long did the velcro glove last? Did it peel off quickly?

Hey man….good video..plus the bonus hack

Hey Man. Came back to this one to see how you made your sanding glove. I keep meaning to make one!

Hey man no matter what you do it´s always very clear to meand just have no words to thank you enough

Hey man, I've been putting my sander in the vice for a couple years now. Total game changer!

Hey man! I've watched a ton of your videos but somehow missed this one until now. Happy to see how the famous sanding glove was made in the first place and now I want to make one also. Should really help prevent my hand from getting roasting hot from the friction of sanding.

hey man, i love you'r vids

Hey man, great tips! have you ever done a video comparing different finishes?

Mold release can actually get tacky over time and when exposed to air. It really is a short term lubricant for molders that gets reapplied often. so be careful. I would probably suggest using a surf board wax or a Starrett M-1 lubricant that goes on wet but dries slick.

Hey man, thanks for these easy hacks and good ideas. More of these videos would be great!

Hey man!
Great hacks

Hey man, I recently built a router jig so that I can plane larger items that wont fit through my planer. What advice or tips do you have to keep the project pieces clamped down and secure? my pieces are wanting to move around on me by the force of the router bit.

Hey man, cool vid

Hey man ! Thanks for the shop hacks !

Hey man! Love your channel. "Discovered" it a few days ago, & came back for the sanding glove diy. I spend a lot of time sanding finicky epoxy pieces, & often lose my grip (I have a gibbled left wing). This is brilliant. A softer glove with the super fine grit helps get into the nooks & crannies, so thanks for passing this idea along!

Hey man, I love you

My hand cramps when doing a lot of sanding. I gotta make one of these gloves. Thanks!

Hay man, is the mold release you use made of silicone or wax?

Hey man.... another great hacks video!

Hey Man love the glove hack

My guess for the table:$22,000 (currently $11,300 with 4 days to go)

Hay man, great stuff

Hey man, just found your page. Love it!

Hey man. The alcohol on the timber for power planing sounds good. Haven't heard that before.

Hey man, oh leave me alone you know
Hey man, oh Henry, get off the phone, I gotta
Hey man, I gotta straighten my face
This mellow thighed chick just put my spine out of place
Hey man, my schooldays insane
Hey man, my work's down the drain
Hey man, well she's a total blam-blam
She said she had to squeeze it but she then she

Oh don't lean on me man, 'cause you can't afford the ticket
I'm back on Suffragette City
Oh don't lean on me man
'Cause you ain't got time to check it
You know my Suffragette City
Is outta sight she's all right

Hey man, oh Henry, don't be unkind, go away
Hey man, I can't take you this time, no way
Hey man, droogie don't crash here
There's only room for one and here she comes, here she comes

Oh don't lean on me man, 'cause you can't afford the ticket
I'm back on Suffragette City
Oh don't lean on me man
'Cause you ain't got time to check it
You know my Suffragette City
Is outta sight she's all right

Oh hit me

Oh don't lean on me man, 'cause you can't afford the ticket
I'm back on Suffragette City
Oh don't lean on me man
'Cause you ain't got time to check it
You know my Suffragette City
Oh don't lean on me man, 'cause you can't afford the ticket
I'm back on Suffragette City

Don't lean on me man "cause you ain't got time to check it
You know my Suffragette City
Is outta sight she's all right

A Suffragette City, a Suffragette City
I'm back on Suffragette City, I'm back on Suffragette City
Ooo, Sufraggete city, ooo, Suffragette City
Oooh-how, Sufragette City, oooh-how, Sufragette City
Ohhh, wham bam thank you ma'am
A Suffragette City, a Suffragette City
Quite all right
A Suffragette City
Too fine
A Suffragette City, ooh, a Sufragette City
Oh, my Sufragette City, oh my Suffragette City
Oh, Suffragette
Suffragette

Hey man.........hey.

Hey man, A bit late on the scene but have just started mucking around with some timber in the shed as a hobby, and had to say love your vids. Informative, tho unfortunately am located in OZ and can't get a lot of your products here, so am trying to achieve the same finishes that you get but with the products available, they don't look as nice as yours.....needless to say i'll soldier on and produce the best works i can. Cheers. Keep the vids happenin...

Hey man, good stuff. I've used alcohol to pop the grain before finish sanding, but never thought to use it before planing. Thanks.

Hey man, I dig these “tips/ tricks” videos. I think it would be cool if you dropped more of these every now and again if you’ve got the time. I find that I won’t watch certain woodworkers tips videos as I’m not a fan of their style of communication, but I do like yours as you keeps it real.

Hey Man , love the glove idea,,,,,,

Hey man
Thank you for the vid.
Will you do a hand tools and bits video please?
With so many folks making tools I find it difficult to feel as though I am spending my money wisely. Your opinion about bits and tools (alright, bits are tools) is fair and accurate. Therefore my three brain cells might even agree on something and focus.
Be well.
(edit) Viewed your bench video. Thank you for doing the video so quickly. I mean, going back in time and doing a shop video. Amazing.
Please consider doing an updated close up your shop in a similar manner. Possibly annually? Really depends on the amount of new tools you... apologies. babbling.

Hey man, hey man!

Hey man, love the hacks!! Looking forward to more from ya!

Hey Man. Thanks for the tips! Sending them to my nephew who is just starting to learn woodworking.

Because Heinz ketchup…that’s why! Haha, great video with neat ideas

Hey man

Hey Man!

1 Year later 🙂

Hey Man!👋🏻 I just ordered the 3M adhesive to make a couple sanding gloves for my husband and myself. I keep alcohol everywhere…I use it for so many things. Great ideas! Thanks!

Woodglut is nice for that.