Комментарии:
Didn’t work for my 2005 Malibu
ОтветитьThanks. Great explanation and demo. it made programming my key fob so easy after losing my keys recently.
ОтветитьMines taking forever, I did it 6 times and it still ain’t working
ОтветитьVery helpful thanks 💪🏽
ОтветитьThanks for the help. Me and my wife do cooking videos too.
Ответитьfor trunk?
ОтветитьIs there a way to reprogram my second key to be recognised by immobilizer? Key was working fine but i tried to take radio out by bit of force and the key stopped working. I have other key that only locks car manualy. And the button on starting key doesnt work.
Ответить5-6$ for a battery and your complaining about price, bro cmon how cheap are you.
ОтветитьThank you!!!
ОтветитьYea I got this same deal for my 2003 Yukon XL a couple years ago…they were easy to program, then after about a month the primary fob stopped working completely.
Started using the secondary fob, and after a couple months the battery went dead, I replaced it with a new battery, 2 days later the battery was dead again.
Went out and bought another battery, used a multimeter and checked the voltage right out of the package and it was good.
Put it in and 2 days later it was dead, and not just low/dead…it was under 1 volt ((a new CR2032 battery starts out at around 3-3.25 volts).
Stopped using that fob and haven’t been able to get another one to program to the truck since! It enters programming mode but immediately exits on its own as soon as you release the lock button (horn beeps a second time to confirm it’s out of programming mode).
Guess that’s what I get for cheaping out originally and buying cheap Chinese knock-offs!
Absolutely spot on. Worked perfectly!
ОтветитьHow 'bout your 2014 impala has remote start?
ОтветитьSuper easy to follow and it worked. Thank you!
ОтветитьThank you 🙏🏾 🎉🎉🎉🎉 you’re so awesome
ОтветитьThank you so very much for explaining it very quick and thoroughly, very happy!!!!
ОтветитьThank you. Worked like a charm. Paired an '07 TB old fob with our '05 TB. Very clear instructions.
ОтветитьHey Axele’s Garage I’ve tried this before working like a Charm, BUT today after my last Remote went bad I reordered a new Pair and advanced forward to do the Reprogramming except this time since the remaining defective one can’t work to disable alarm, now when I hold back open door switch then turn key twice, the ALARM turns on loud sounding interrupting the programming process which disallows me to continue wireless auto code insertion codification to accept “auto-key” install validation! How can I BYPASS this dog-gone interference inconvenience? I’m quite anxiously in dismay and annoyed of this inhibition! Please give me another super magic touch method to process key programming! Thanks a bunch of millions for any advice? I’m original owner of GMC 2003 Yukon since then can’t remember the hidden location “secret-button” to disable security alarm system bypass!
ОтветитьThank you for showing me how to program the key fobs, would you use 3 minutes to talk about nothing you should just jump right into it, and demonstrate and explain how to do it
ОтветитьI’ve done this on all my vehicles saves money also it’s $25 at a junkyard if ur desperate for a fob make sure it’s the right one
ОтветитьEBay 995 to remote with new batteries programs to the Trailblazer
ОтветитьDo the keys actually turn the vehicle on or are those keys only used to program?
ОтветитьThis 5 year old video about programming a key fob just saved me about $200.00. Great video and easy to follow. I was able to program my new $25.00 key fobs and keep driving. Thank you!
ОтветитьKk and pappy my great grandparents had a 2005 Chevy trailblazer
ОтветитьAce is not the place anymore.. it’s Amazon
ОтветитьI just paid 75 for a fucking viper remote. It's a massive pain in the ass to program. I swear on my nut sack that I will never buy another goddamn viper alarm. Oh and check this bullshit out. Because i don't have a remote programmed, I have to use the key to unlock it. When i do, the alarm goes off. The security system randomly locked me out with the keys sitting on my seat. I called a wrecker, and it took an hour and forty minutes to get into my Avalanche, throwing everything that both of us had at it. When we popped the door, we heard nothing from the alarm. What a piece of shit. Open it with the key, and the alarm goes off, break into it and it does nothing. Fuck viper alarms
ОтветитьHow To Program Key Fob Remote or Keyless Entry - 2002-2009 Chevy Trailblazer & similar GM Vehicles
COPY AND PASTE TO WORD:
SHUT DOOR
PUT KEY IN IGNITION BUT DON’T TURN IT
HOLD DOWN THE ‘UNLOCK’ BUTTON ON THE DOOR
CYCLE YOUR IGNITION KEY TO ON
THEN OFF
THEN ON AGAIN
THEN TO THE OFF POSITION
YOU SHOULD HEAR THE HORN BEEP
YOU SHOULD HEAR THE DOOR LOCKS CYCLE OFF AND ON
NOW YOU CAN LET GO OF THE UNLOCK BUTTON
NOW WE ARE IN PROGRAMMING MODE
TAKE YOUR REMOTE AND HOLD DOWN LOCK AND UNLOCK AT THE SAME TIME
WAIT ABOUT 20 TO 30 SECONDS AND YOU WILL HEAR THE DOOR LOCKS CYCLE
ONCE THE DOOR LOCKS LOCK AND UNLOCK YOU CAN LET GO OF THE REMOTE FOB
IF YOU HAVE MORE REMOTES DO THE SAME
WHEN YOU ARE ALL DONE
CYCLE THE KEY TO ‘ON’
YOU WILL HEAR THE HORN BEEP AND THE DOOR LOCKS CYCLE UP AND DOWN
TURN THE KEY BACK OFF
OPEN THE DOOR
SHUT THE DOOR
YOU ARE ALL DONE AND YOU HAVE REMOTES THAT WORK 😄
Thank you!
ОтветитьThank you for your help👋😊
Ответить2/14/2024. Tried this on my Tblazer!!! PERFECT!! Now we are going to get fobs for the suburban. Thanks so much😊
ОтветитьI was able to reprogram the FOB that I have after some car repairs made it necessary. I bought a second one so my husband would have one. I was then able to reprogram the new FOB but it disables the old one. I did this about 6 times, one will work and the other wont. I took my old one and put it in the house away from the car, reprogrammed the new one and went to get the old one out of the house only to find it disabled again.. .any ideas? Thank you, I decided to take your video out to my car and go through it again, I think I got it this time...lol...they both work. Thanks again!
ОтветитьI apprecoate you brother. Just bougbt a 2002 Chevy Trailblazer from a neighbor anf the fob wasnt responding. It does now, thanks to your video. Thanks again!!
Ответить🎉 thank you!!
ОтветитьGreat Infomercial
ОтветитьWhat about cars that need to key in the car to start - not just open doors
ОтветитьI have a question, but first I would like to say great job on the video. My question. Once a key fob has been programed with one keyless entry module, can i reprogram the key fob?
ОтветитьSo I put a new battery in my remote and I assumed that it got un paired because it wouldnt work anymore. So I come here because this is where I paired it when I first got it and it worked. I go through the whole thing and when it comes to holdinf the unlock and lock button simultaneously it works. However, after I turn of the accessory, and open and shut the door, the fob doesnt work. Any ideas?
ОтветитьI love no bullshit new yorkers ! ❤🙌🙏🏁✌️
ОтветитьI have a push button car. How do you program it?
ОтветитьThis helped me so much thank you
Ответить6/7/24 Thank you. It works perfectly 👋😊
ОтветитьDude.. just cut to the point of the video..
Eff the intro,
Eff the history of the vehicle..
Just cut to the point
I lost one of my remotes to my Buick on clave twentyou're uncle.I'm clever.I want to get a new one-off of Amazon.What does that mean I need to get two of them because my original other one that I have will no longer work ?
ОтветитьSorry, that last one was all jumbled. I have a 2015 Buick. Enclave. Want to order a new fob From Amazon and programming? Does that mean I need 2 new fob or will my old one still work?
ОтветитьThis video Sure helped me program my fobs to my 2006 Chevy trailblazer it was really easy thanks a lot
ОтветитьStill sent work on either of my remotes.
ОтветитьMine didn work 😢
ОтветитьPERFECT
Ответить