Комментарии:
You are a brilliant artisan
ОтветитьThanks!
ОтветитьI really like these homemade machines and tools and uses for said equipment. I know you already have a lathe, but can you or anyone on the board recommend a hobby lathe like a 15 inch bench lathe? Great vids. Lance
ОтветитьWhat a nice and simple sollution. 👌🏻 sure thare are better looking versions out thare, but this just does the job without fuss. Love it.
Ответить👍👍👍👍👍
ОтветитьLots of diffrent shaped dildo tool you made there!
ОтветитьNice! Looks like I've got a new project.
ОтветитьNow I've gotta build this for my lathe. This is cool. Thankyou for another awesome video
ОтветитьI have been trying to figure out how to cut bottom anvils for an English wheel on my lathe for ages. The videos i have watched previously have left me scratching my head but this was so simple and clear. The light has come on in my head and i shall create with confidence. Thanks Karl! Another Aussie in awe of your abilities 🇦🇺 😊
ОтветитьI love your videos please keep them coming 👍🏻👍🏻👍🏻
ОтветитьThat was very impressive...your talents know no limits.
ОтветитьGreat design for the circle cutter. You do fantastic work, your instructions are clear, and you make it look easy.
The circle cutter sure makes it easy to cut ends for levers, and as you have shown, for making the heads for the shaping hammers.
I just about had a heart attack, when I saw where your dial indicator was resting well inside the arc of the jaws of the lathe chuck. I wasn't able to breathe until you swung it back out of the way.
You can make but plugs
ОтветитьSimple? Easy? You sure? Lol! We're all not so gifted with your skills man!
ОтветитьIt's always a good time watching you work your magic.
ОтветитьYeah Dude!! NOW FINISH the COE!!!!
ОтветитьNice little tool Karl!
Now you just need to make another tool that snaps on the bronze bushing and gives you a reference to measure the position of your tool bit to set very precisely the radius...
When does the ramp truck come back?!
ОтветитьVery cool on the radius tool.
Now to learn how to mill a ball sphere on the mill with using a boring head and spin fixture.
More old school learning.
Never used a lathe in my life. Always made due - but… man you can do a lot with a lathe
ОтветитьGood work. We shared this video on our homemade tools forum this week 😎
Ответитьwhen will you complete the hauler that you and half ass custome started.
Ответитьlove it pal! killin it!
ОтветитьThanks for sharing, if you build tools they will work. The lathe was the first machine tool and all others were probably made on a lathe . A must if you work with metal.
ОтветитьHi Karl. You need to break the bad habit you have of leaving the chuck key in the chuck on your lathe. Many serious injuries have been caused by flying chuck keys when the lathe is started. When I started my Fitting & Machining apprenticeship (long time ago) the supervisor would kick my arse if I did this. PLEASE, DO NOT LEAVE THE CHUCK KEY IN THE CHUCK! Be safe! Cheers From Australia. Paul
ОтветитьWhen are you going to work on the ramp truck agian?
ОтветитьI literally needed to make one of these and was hadn’t got round to sketching one out so you’ve saved me a job and it looks like it works awesome.
Keep up the great work 👌🏼
My dad had 59 Road master, that was a beautiful riding car.
ОтветитьThat tiny car tripped me out!
ОтветитьKarl you are an innovator so you can make your life a little easier, and that is the name of the game “ innovation”!! Love your content as always ❤️❤️👍
ОтветитьI'm buying my first lathe for my workshop on Sunday. This is perfect ❤
ОтветитьReally nicely made tool that should last you out. Nice.
ОтветитьGreat idea Karl, I’ve been looking for an less complicated version to make for my lathe. Thanks!
ОтветитьWell done Karl! Gotta build me one of those for my Atlas, it’s cross slide is almost identical to yours. Your talents continue to impress me, thanks for sharing your ideas!
ОтветитьIt looks great. But am I misunderstanding or wouldnt it have also done inside radius(dishing forms) if the handle hadn't been permanently mounted? It seems a square shank on top and a breaker bar would have allowed it to do outside radius like is currently does, or flip the tool and cut concave shapes for press or hammer forms or speed hole dies.
ОтветитьWhat’s up with the ramp truck??
ОтветитьAnother great video! You need to have links to the music you use!
ОтветитьEven tho I'm a car guy, I also have a good old Lablond lathe. I just wish I had a Bridgepport, and ironically, I'm from the same town they were built. I even remember where their factory was when I was a kid. I just need some room.
ОтветитьLove it dude.
Im halfway through building a shed at the moment, lathe under cover outside, mates possibly selling me his mill, super pumped to get back to making stuff!
Video is top quality as always, no faff, no waffle, just to it and a great mix of getting by and using the right tool for the job.
Really appreciate it.
There isn't a huge custom scene (to my taste) where i am so i hope to build a few bikes and change that if i can!
Nice one fella.
Love your style.
Damn son. Mad skills as always. You are one skilled Mother Tucker. LOL
ОтветитьAre you getting close to offering the MotherTucker for your fans? Mark
ОтветитьCan't wait for the Mother Tucker hammers to hit the website!
ОтветитьJust reading the mail , you've been hacked by telegram. I deleted the message as I don't want to keep it in my files. God Bless and keep up the good work and stay well , Stuart in Ontario...............
ОтветитьMan this is so simple yet effective.
Love ya work mate 👍😜
makes it easier to make dies for your bead roller.
Ответитьyour work is festinating
ОтветитьI would use red locktight on that pivot screw. Set it and forget it.
ОтветитьThis tool is one of the reasons the lathe is the mother of all machine tools, very well done!
Ответитьwow, your skill set is unbelievable ! Look forward to ever video 🙌
Ответить