Комментарии:
Thanks for watching and let me know if you have any questions. Also, what other videos do you want to see?
Ответитьyou really let yourself go, you look great in this video. hope you're ok man.
ОтветитьIm not able to take the metal cover off there are plastic pieces that keep it down
ОтветитьFor some of the newer ps4 slim models, you will find that the some of the screws are a sort-of melted plastic screw. It was like they poured plastic inside and let it solidify to prevent you from opening it. If your console has this, be extremely careful.
I used a VERY small flat-head tip and carefully chisseled underneath them until the screw driver "beheaded" the top of them. Only then could I open it enough to blow out the heat sync and fan.
I'm guessing this is a way to void your warranty.
Fantastic! My playstation isn't ready for take off anymore
ОтветитьHow do you remove those black screws? Mine seem to be covered with something, and it wont come off
ОтветитьThanks for the assistance
ОтветитьWhy couldn’t I have found this video a year ago?! My PlayStation sounded like it was going to explode😂
Ответитьim not dusty dirty 🙄
ОтветитьYou left out the part where you have to pick off the black plastic screws
ОтветитьReally hard to follow your camera angle is absolutely terrible, a close up tom down camera angle would be so muvh better
Ответитьyour videos are the best but my large metal plate has plastic rivets on it not screws so unble to remove and clean any advise please
ОтветитьThanks man my game is working now😊 it wasn't reading the game disc now it is 😊
ОтветитьI cannot lie I’m scared to open my ps4 and risk breaking it
ОтветитьThank you now my ps4 won't turn on
Edit : this punk owe me 50$ that's what cost me to fix the board and vent fan
HOW DID YOU GET THE BLACK SCREWS OUT? what tool
ОтветитьCan someone help me out?
The part to take off that metal cover for the fan, most of the screws are blocked by what it seems as plastic melted on top of the screws which stops me from taking off the metal cover, if theres something i can do that can take the plastic off pls tell me.
do you need both t8 and t9 or just one of them
ОтветитьDoes no one else have those black plastic bits that hold the grey plate in place?
ОтветитьMan.. I wish you were in Ghana so I could send mine to you
Ответитьstraight on point.
i love it
My PS4 doesn't sound like a jet anymore.Thank you so much!!!
ОтветитьExcelent video
ОтветитьDoes prying on the case like that damage it at all?
ОтветитьHello sir, thank you so much for this video!! I am a mom of 3 with a heavily used ps4 slim that is over 10 years old.. my husband and I have been using it since before we had children. I thought it finally died today but as a last stitch attempt I decided to take it apart to clean it. Your informative video saved me a great deal of trouble. Thank you so much!!!
Ответитьthanks man, my playstation finally doesn't sound like a jet taking off
ОтветитьThank you.. Simply explained 🕹️
ОтветитьWhat about the black rubber screws?
ОтветитьHow do you get the small black ones out of metal piece that covers the fan?
ОтветитьWhy did you not clean any deeper?
ОтветитьMan i have a problem with the plate there is only 3 screws and black plastic look like a one time use , so i don’t know if i can remove it or not???keep the good work, thank you.
ОтветитьBruh how do I take out the black dots ones there filled it ??
ОтветитьLike the dust air
ОтветитьWerre do I get those tools?
ОтветитьRandi e bche give me screw driver
ОтветитьI'm guessing Sony decided that they didnt want us doing this ourselves, since they've now melted the black pegs that protrude throught the metal plate, so that they're smooshed over the holes (lots of ppl in the comments calling them rivets). Great for holding the plate in place and stopping any vibration. Not so good for those of us watching you just lift it off whereas in our newer model Slims we risk bending the metal plate.
ОтветитьHow do you take out the black screws?
ОтветитьWtf 50$ for a screwdriver? Screw that I'll buy another console wth
ОтветитьThank you for the video. My first time cleaning since 2014 and it wasn't that dusty. I was really hoping this would fix my issue with the frame rate dropping to 1fps on rare occasions. . . I don't know what else to try
ОтветитьI got all the screws but metal plate won't come off. There are black dots that look like screws but are not.
ОтветитьI’m having issues with my ps4 now in which I cleaned it but the fan doesn’t spin anymore and so I take my finger and spin it which starts it back up but only spins for an hour at most and then it eventually overheats and turns off so even tho I know this is old any tips would be appreciated I have a slim btw
Ответитьftw
ОтветитьCan you use a vacuum to clean it?
Ответитьcan i use a drill
ОтветитьBro my white plate wont come off its like its sticket to the black part
ОтветитьThanks my flight finally landed❤
ОтветитьAnks rhdkshiwnwveuwkebkw iebuk2wg
ОтветитьThank you so muchhh my ps was heating up in 20 mins of playing bo3 and it was loud like a fan of a cat and when i opened it... thank god i saw your vid to deepclean it cause the whole ps was a cotton market
ОтветитьHey Tronics fix! I followed your video to clean my fan. However I dont have screws to take off the metal plate to access the fan. In place of these screws are these little platic pugs and I can't take them off without breaking them. Do you have any suggestions?
ОтветитьI have little black screws how do I remove those?
Ответить