Net Wrap wont start on New holland baler

That has to be a series of extremely useful tips for those folks who have one of these who have a similar or same NH baler to this machine Ted. Just brilliant helpful advice for dealing with this nightmare problem - it has to be really exasperating for anyone in this situation with a crop needing to be baled!

Thank you for doing that Ted. I have not had those issues yet, but checking those few things will become part of my start up checklist.

I can't find the net wrap on my baler. thanks for the video it is very useful for people that have round balers not Square balers. hope you have a great day

another point in case of how it is good to understand the operation of your equipment..  well done Ted.

Good vid    Dads baler has something wrong in the computer because it won't even do anything if you select net wrap but it isn't worth fixing.   It is $5500 just to fix the pick up so we asked what about just buying a new pick up but that is $24,000 lol

thanks Ted ive never been around a round baler but interesting to know how they work.

is this the same as the 648 round bales?

My Kuhn baler monitor goes insane sometimes but makes great bales

I've had the brake too loose and wrap the bale about 7 times before I could get everything shut down. Had error code and it fell down on the shaft wrapped up on the pto and short shaft from gearbox to triple sprockets. What a mess.

How to fix new Holland 650 twine baler same issue

I was having that exact problem on our NH baler! Extremely helpful video. Thanks!!

My BR740A silage special baler will not wrap close to the edges and I have 51 inch net wrap. Any suggestions new holland folks?

the actuator error code keeps coming on and it wont wrap the bale of hay how do i go about fixing this

I enjoyed your video. very informative. I have a br740A round baler it has a problem im having a hard time tackling. I keep getting a actuator error i did what the book said put independent 12 volts to see if it works and it retracts and extends with power. it will retract with the controller it will not extend. It isn't making any bales. have you had this?

Solution to all of these problems... sell your NH and get a John Deere 😉

I have a BR 780 when the net wrap gets low it won’t take it you have to pull the net wrap back out of the rolls re-threaded and then I will take it but if you put a brand new roll in it works every time perfect ~Net wrap gifts low again . Any ideas on why this is happening?

My baler won't leave enough net through the duck bill and I have to thread it through every bale. Had all the other issues you talked about but not surprising that the baler I brought hadn't been stored well or used for 3 years

Claas much simpler at reliable.

I have a roll belt 450 and I’ve had trouble with it tomahawking bales. I watch my levels in the cab almost every time it right on but kicks out a tomahawk bale. Any thoughts on a fix ?

my NH 848 baler keeps wrapping the net wrap around the roller and not the bale how do i fix that.

I just bought a used BR780A and having problems with the net and twine starting.  I think the actuator is bad is there anyway to check it ?

I have a BR780 net wrap only works in auto intermittently

I have the exact same baler baler but its the crop cutter version and this fall late it has started slipping the belts without any hay in the chamber, it also has 0 belt pressure when it does this. so far we have rebuilt one of the pressure cylinders that wasnt holding pressure and put adifferent adjustment valve on off another baler and still the same problem.the baler only has 3600 bales threw it,i was wondering if u had any ideas to try?

thank you for posting...very informative. keep em coming!

Get a pto guard man!!!

What would make the wrap go only to the middle and not all the way out?

I have a 660 newholland that will sometimes auto tie the wrap but most the time I have to manually push the tie button. Any ideas

I'm running a 664. Had a helluva time running it yesterday as the net wrap wouldn't get grabbed because parts of the mesh were breaking and wrapping around the roller. I had to stop and cut the mesh off of the metal roller (that keeps the mesh inline with the duckbill) and restart the mesh. Finally ran out of the old roll of mesh and Dad and I put in the new one-and the problem completely went away.
One question I have is whenever the duckbill moves in for the bale to catch I'm hearing metal on metal for a second or two like the duckbill is dragging on a roller. Surely this isn't supposed to happen is it? I'm learning the quirks and tricks on the fly with this and I'll gladly take a few mesh problems over the old Vermeer 650F we had that took SO much time to twine wrap, shut off the baler, open gate, close gate, and then pull forward 10 feet to drag up a wad of hay praying the bale would start. This year has been extraordinary for red clover hay as our 664 was gobbling up windrows sometimes 4 feet high.
Thanks for the video-there are simply things a manual can't teach that practical experience does. (Oh and don't forget to release the brake catch! I forgot and wrapped a bale at least 4 or 5 times instead of the usual 2 lol.) Things have come a long way from the old Allis Chalmers Rotobaler. (That my Dad still uses. Talk about a baler that requires the most absolutely perfect hay to work.)

644 bale command plus will not extend duck bill showing er 2 error whatever that is please help thanks

What would cause the wrap not to start on a 450ut roll belt?

Hey. I have an br 6090. I am struggling to get it to wrap my edges of my bales

Nothing beats experience....good of you too take time to share yours...👍👍

We just got a BR750. Many times to won't grab the net wrap to begin wrapping. We have to get under and cut the net wrap to a length and then initiate the wrap again. Any ideas?

Anybody have any suggestions on a BR 780

every 5-8 bale the net wrap will not wrap the outside edge of the bale And does not cut well

Changed the bearings on the cutter as the cutter bar would hang up occasionally

Changed the brake pad on the net wrap roll as it was pretty worn

Both improved the issue but did not eliminate it

Most recently due to a poor net wrap cut pieces of net wrap got mixed in with the drive bearing and caused it to fail

Any suggestions are much appreciated

We have a New Holland BR 750 Baler and been using twine and want to change to net wrap. What do I need to do to program the baler

Don’t forget about the duckbill adjustment …Your tips are spot on 👍

How do you change your baler from twine to netwrap? It keeps telling me I have an actuator error

Really handy tips thank you. 👍

What would cause the baler not to cut the net wrap all the time. Most of the time I’m having to turn off the pto and turn it back on for it to cut. If I don’t it just keeps wrapping the bale

Hola desde Argentina! Tengo una BR7090 que no me corta la red tal vez podes ayudarme

We have that same kind of Baylor but we're having problems with the hay getting stuck up in it before even goes into the machine itself!?

Hi Ted. I have a cropcutter 644. When the bale is full it catches the net and starts wrapping. Then an error sounds on the box and the net keeps going. It does not retract the actuator itself. You can manually retract it on the control box and guess when there is enough wrap applied and retract fully and it cuts properly. I have replaced the sensor on the wrap roller. Any idea what to look at next? TIA

Ted I have question on br 7090 why would the net wrap stop working when there is 1.25 inch of net left on spool I have to re thread the net every time any ideas thanks

Little late seeing this video, but hopefully you can provide some insight.
We have the RB 564, so a red new Holland.
It ran great until we changed the netwrap.
Now it’ll make the bale but won’t engage or
Pick up the netwrap.

Hello, I'm having a issue with my case baler. ( your monitor is the same as mine) in manual mode the it won't retract. No clue. Any help appreciated.

Hello, I have a br7090 new holland baler and when the wrap gets low, it will start wrapping the bales and will not stop.

My bailer won't go back to home

My bailer for some reason does not wrap, but I keep having an error on the monitor saying actuator. What does that mean?

Thanks just what i was looking for