Комментарии:
Suburu finally installed new headlights in my wife's Impreza (recall had been our for a couple of years). Replacements aren't much better so I'm putting the LEDs I got back in the light fixtures. The Suburu shop removed the Fahren LED that I'd installed without marking which side they'd come from or which were high or low beam. Is there a difference. Two of them have blue tags on the wires and two have yellow tags. What do those colors signify and what's the difference?
ОтветитьSponsor me 😂.
ОтветитьI bought the pack of 4 from Amazon and of all, only the Hight beam was working. I wonder what was wrong
ОтветитьDoes not fit on a 2019 Chevy Colorado
ОтветитьIm having trouble installing in my corolla 2012.
Any advice?
This product is a scam and I’d avoid buying from them, absolute junk. All four bulbs i bought for my ‘07 did not work. Probably sat on a shelf for 5 years and they don’t qualify check before shipping
ОтветитьThem bad boys are bright!!!!!!
ОтветитьSo I have the termitor series which has half moon hood over the forward led. Does that go facing up or down?
ОтветитьWonder how well this bulb would do on a rainy day if water hit it.
Ответитьyou pieces of shit, how do i replace a led that went out ? nowhere can i find it
ОтветитьThere are people stealing video and installation guides left and right man. No good
ОтветитьMine are not staying on. Got the termitor ones
Ответитьhow do you install the high beam wit LED
ОтветитьPain in the but to install on every car unless the headlight assembly is taken out. most cars that mean removing the pumper and way more then you want to mess with just to change a bulb
ОтветитьJust installed h11 on 2008 fusion. Now have head light warning for both sides. Suggestion ?
ОтветитьDo you have to put the dust protector back on?
ОтветитьНаи балово!
Ответитьhi i bought this lights but i did a test drive arround my block and when i came back to adjust the beam pattern they where untouchable they were extreme extreme hot just with a 2 or 3 min test drive, how is that safe ? i mean how long unltil something inside the antiflicker box melts , is that normal or am i just overthinking can someone please help ?
edit : what i mean untouchable is the rear part when i was trying to take them out, i dont know how hot the led part was. of course im not trying to touch the actual led chip.
Couldn’t get them to fit in low beams on my 2017 Nissan Sentra. Moved ‘em over to high beams. 🤷🏽♂️
ОтветитьI just purchased these. So far, So good.
ОтветитьGot the H11 low beams for my 2014 Prius, they don't fit at all. Won't lock into place. Any tips?
ОтветитьGuide on the h1 install? Mine are not clipping into the housing, the bulb shape is too big.
ОтветитьWhat do I need to make a H11 B conection
ОтветитьNah they make this wayyyyy too simple. Now give 4 inches of space and a cut so small. Took me 2 hours and taking out the headlight I would have to take off the bumper and sh*. F** that
ОтветитьAwesome. Where do i find a car that has nothing else within 12" of the headlight socket like in this video? lol
ОтветитьHello, I bought a kit h11 fahren scourge only that the allen wrench did not come in the package, do you know what size of the wrench is the one I need? Thanks for the help
ОтветитьYou all should show how to accurately adjust the collar on these, not just show you have them set right on the video and pop them right in.
ОтветитьUseless video. Not very detailed. Not professional at all. Annoying music.
ОтветитьGot these for a 2017 durango with projector headlights and fog lights. All I can say is amazing! Great hot spot, way more flood making everything more visible. Cutoff is irrelevant because the durango has shutters but seeing how high and wide the beam is in the fog with the high beams on I could see it being a problem in reflectors or a different style projector. They match the DRL's and have a very white light with a hint of blue but nowhere near as blue as the halogens that try to simulate the look. Honestly the one thing that disappointed me about the durango was the headlights until now!
ОтветитьCan you explain the difference in all the models you have. There is terminator, forerunner, LED kit, ursprung, and Krieges but I can’t find a comparison anywhere. Thanks
ОтветитьHi... I have a 2005 Nissan 350z that uses xenon bulb D2R. I want to change it to led. What model do I need? an adapter? Thank you
ОтветитьAwesome stuff...just installed your H11 s in my 2015 Toyota 4runner... quick question - How hot does the Driver Unit get? I mounted it behind the sealing dust cover and wonder if its gonna get too hot. Advice?
ОтветитьH11 is not locking when I put it into the light harness on my 2010 Nissan Maxima. Anyone have advice? Kind of a pain with this car, I don't want to take off the bumper so I'm going through the fender walls and can't see too well.
ОтветитьHi Fahren Support, I'm Daniel. How are you?
I bought these LED H11 bulbs for my van's headlamp. Can you tell me where exactly to mount the Driver? And where am I using the Zip Ties? Does the Driver needs to be mounted outside of the headlamp? If I mount the Driver outside of the headlamp, it's wires will be sticking out of the headlamp, and I will not be able to close and seal the headlamp with it's original Rubber Seal, that is used to block out moisture.
Can you let me know the phone number for support?
Please let me know. Thank you very much in advance.
Sincerely,
Daniel
Customer
Bought my bulbs for my low beams and high beams for a 2014 Honda Civic Si Sedan and they are absolutely wonderful! However, the high beams also act as my DRL and tells me to check my DRL. Can this be fixed?
ОтветитьOk so I’m having trouble trying to adjust the beam pattern. It’s supposed to twist around 360 degrees but I can’t get it move at all...
ОтветитьMy daytime running lights flicker
ОтветитьI wish it was that easy. Getting your hand in there while not being able to see the groove sizes is a pain for 2015 Jeep GC. I hate the engineers that designed that.
ОтветитьI'm having so much trouble installing these on my 93 ford f150
ОтветитьOn a 2008 Toyota camry... if i wanted high beam ones. . Would i lose my day time running lights because of the double stage lighting.
ОтветитьHow do I take off the collar off of them
ОтветитьIdiotic installation video... why does the video end so soon? What do we do with the driver? Why do i have zip ties? What are we zip tying this to? Wtf.
ОтветитьI purchased a set and my drivers side is flickering and shutting off during driving. What could be the cause of this? Lights look good when they work
ОтветитьWhy are mine flickering rapidly??
ОтветитьHow do i buy an h9 due to it being my high beam and my h11 is low beam?
ОтветитьIf mine have high and low beams reversed are they installed incorrectly or defective?
Ответить