Комментарии:
Great upgrades. However, can you provide a file link for each upgrade shown? I find many useful and cannot locate the file for printing.
Thanks
Rich
Yet again you come through with the goods! Thanks for spending the time to share this with us.
ОтветитьI need to print the two object than can fit the original fans on them but the stl files are to many in to the file and i need to tell me specific names of the stl files please
ОтветитьWell done
ОтветитьHello! very interesting and informative, I love it! I have a question: I have a very old CR7 3D printer, but right now the motherboard has deteriorated, I bought a new ender 3 clearity v4.2.2
the question is that I did not take into account the power supply of the board, that is: 24 volt power is written on the new dress and 12 volt power supply on the old one. so I have to buy another 24 volt power supply or does this board have the function of working on both voltages> 24 volts and 12 volts ??? thanks for the reply in advance! Best regards, George!
Just gimmigs
ОтветитьI have a question, my ender 3 is not going all the way over to the left when I do the home command, do you have any idea why?
Ответить3d print so you can 3d print 3d prints better
ОтветитьEven on the bottom, my printer tries to inhale scraps. Maybe I should clean the enclosure…
ОтветитьGood video many thanks
ОтветитьGreat video 👍
ОтветитьYou do know the ones you printed ain't actually on the thingiverse links right?
ОтветитьHey I know im way late to this, but i just got my ender 3. Can someone tell me where to find the ORIGINAL petsfang file? the thingiverse only seems to have the new v2 which appears to be for a different fan than the one with the vent running along the entire length of my fan.
ОтветитьAmazing video!
Ответитьi love your intor :P
ОтветитьHi,
i just bought a Ender 3D max printer... but i can't find anywhere how to install driver in Cura 12 and how to print from Cura 12 via USB cable connected to the computer . Can you please make a video?
Thank you.
he looks like jackie from friday night dinner
ОтветитьI use the printer to upgrade the printer
ОтветитьThat arm for the filament has a lot of bad reviews on thingiverse where it was causing trouble with extrusion....the wheel with bearings on the other hand had great reviews just an fyi
ОтветитьIve just got the ender 3 printer what would you recommend changing the printing bed to from what it comes with
ОтветитьNice video clip, keep it up , thank you for sharing :)
ОтветитьU should print yourself a T handle for ur allen wrench it helps alot when working on the printer
ОтветитьFollowed several of your videos which have been most useful, but have hit a wall with Geetech A10m. Could not get quality mixed colour prints and fell out with the extruders and re placed them with metal ones like the ender 3. The second extruder does not respond. Have changed firmware to move filament in correct direction, Both Stepper motors work, Both Drivers Work check by swapping them over. Most of my remaining hair on the floor. Any suggestion (for the printer?????????
ОтветитьWhat is your opinion on side feeding the spool instead of the brackets to guide the filament, I've booked marked all you vids, I'm inpressed by the quality of your videos. thank you
ОтветитьPlz provide the cooling system STL file for Ender 3 can't find in description. Thanks
ОтветитьYour videos are simple and easy to understand. 👍👍👍
ОтветитьBro, that thumbnail is cringy af.
ОтветитьFun fact at the Moment i am watching this Video my printer is printing the first two Upgrades 😂😂
ОтветитьWhat duct file did you use because I cant find that duct to fit my fan on the top end
ОтветитьWhy cant I find extruder cover like u have
ОтветитьDo you have update for. ender 3 v2?
ОтветитьSo ive tried to print the filament holder about 4 maybe 5 times now and not once have they snapped together, i cant seem to print anything that fits from this guide and im using the gcode and settings as described
ОтветитьThanks! Those are amazing upgrades! great for newbie like me..
Ответитьim not found this on the link Petsfang duct
ОтветитьHow the heck is it possible this guy can look down at the table and I can still see up his nostrils?
ОтветитьI love your videos, Im new to 3d printing, I just got Longer Lk5 pro & I love it so mush It run super smooth & make absolutely no noise, Can you suggest some upgrades for it ? Also I have a Problem with printing size in cura I couldn’t make g code to print full size 300x300x400??! Max is 270x270x399, Its would be great if you suggest some tips thank you
ОтветитьJust mount the filiment arm to the side and you dont need the extra guids. I have no issues with mine
ОтветитьI'm going to get that as a second printer I think. It's funny, you buy one printer and quickly realize that 1 isn't enough haha
ОтветитьYou talk about the last part being hard to print because it fell over etc etc, complete newbie here (and still waiting for my printer to arrive actually), in that case is it not possible to print the piece in a different orientation maybe ? laid on its back etc, I mean literally turning the whole project around to a stable position if possible ?
ОтветитьThat fang limits your Z height ...
There are better options on thingi .
do you think these upgrades will make it a fire hazard
ОтветитьIs there any reason why you printed the cooling mod in that orientation? Wouldn't it be easier if you printed it flat on it's side? If someone has done this, please let me know, I'm planning on printing this on SLA and I really don't have any resin to waste. I just got an ender 3 and want to get it the stuff I need to improve it before my printer gets here.
ОтветитьAny suggestions for good quality filament suppliers in the US? I made the mistake of ordering some from Amazon before I found this channel. I have now had an old Ender 2 and a brand new Ender 3 Pro clog, and I believe it's because of cheap filament.
Ответитьcreality is shit company. they provide poor user manuals, so people ask several times a day why some part is wobbling (eccentric nuts). then when you say to someone to read general tutorials for example about bed adhesion, they remove your comments saying it's not helpful - they force users to be their support, for free.
Ответитьlol mighty car mods fan eh?
ОтветитьI have a question. What about the mesh cord under it? Mine goes across the bottom of the bed so everytime the bed moves it pulls it with it. How do I fix that?
Ответить