Thinsanity Build: be quiet! SILENT BASE 802 + Asrock Z590/Liqid Freezer II 420

Sometimes Wendell is so chaotic and goofy I can't help but laugh when editing. This is one of those times xD
More results from this PC are in the hopper, but this is mainly a (hilarious) case review.


Hope you enjoyed!

~ Editor Amber

exquse me sir, can i fit an AIO 360 on top with 35mm thickness?

Why dont show us how you build the Radiator in? I have the 802 too, but i dont get in the Artci Freezer III 420 black inside. Datas are the same like the freezer II 420!

Hi, thx for the video!! Formnerly I was not sure if I should order a LF 2 420. But indeed - it fits. But I wonder why you built it with tubes on the top. OK Arctic´s installation manual describes this position, but it is mostly recognized at least as sub optimal. Had a bequiet silent loop 360 before. They didńt recommend this.
So Íve built it with tubes on the bottom. Fits as well in the case. The only problem are these short tubes of the cooler (theses AiO tubes are ALL to short). But thank god this case can be inverted. With motherboard upside down I could install the cooler.

Improper radiator mounting :D Please show it to Steve from GN :D

Hi where can I find the performance review?

Does it fit with the rad in proper orientation?

I really like this case, but it has only 3 included kits for HDD, and i have 4 of them (plus two SSD). So, my option is go bigger with the 900 pro v2 or Lancool 3 (up to 4 HDD)-

put the radiator tubes at the bottom bro not the top. There will be an air gap at the top of the enclosure. With the pegs at the bottom it won't interfere

AIO is upside down. Tubes should be down bottom.

Is it possible to put cooling in the top? Is there enough space?

Hello i have the same case and im wondering if it fits 420AIO on the top

What happened to the full performance review of this setup? Did it end up sucking?

so this aio can't install at the top of be quite 802 case?

Чувак...огромное спасибо,я теперь точно знаю,что эта водянка встанет в этот корпус!

Так а как туда влазит 420мм Арктик? Надо снимать с неё вентиляторы и ставить их на вдув в корпус?

Wendell is making everyone die of laughter. Is he playing way too much sims?

Finally! My level of sanity!

"Bloody paesant"

Irritatingly I was trying to get this this week and was unable to find it. Looked on Newegg and Amazon. I got the bequiet 500 and I’m a bit worried it’s a bit small.
This case I mean

It reminds me of the first Cooler Master CM 690.

Lol, all unboxing and explanation. Wendell is so boss at building PCs, there's no reason to film the process.

Btw, anyone frequent the level one forums? Honestly, I'm intimidated, but I'd like to get more ideas for single-board computers and networking. Lawrence systems soars over my head every time.

Did Krista give him some of that 420 stuff he was talking about. He is a bit wacky in this video :). Pretty good video btw.

I just built a new PC with this case. It's a pretty nice case, but I ran into a few problems. First, I couldn't get the fan switch to work in "auto" mode; the fans go to 11. The fans are 3 pin models, so I assume their included fan controller isn't dealing with that. Second, the fans are pretty weak and realtively noisy. I replaced two of them with notuas. And finally, I'm not a fan of the legs/landing gear/slide. They snap in, never to be removed again. They have rubber things on the bottom, preventing them from sliding easily on capart when I pull my machine out from under my desk. Other than that, though, the case looks pretty good, has plenty of airflow, and is easy to build with.

That peel was very noisy for a silent case...

Yea, that Asrock phantom 6800XT would look rad in that setup!

I like the fact The Be Quiet 802 Case came with that the Front Grill swap out, Oh and lets not forget that White goodness.....But to make 1 Minor Bitch Point about the Case HEY BE QUIET....an ALL white Case Means ALL of it even the pass thru Rubber grommets! This is Something Others case makers need to stop doing to its almost like they are Phoning in a White case By paint the Big parts White and skipping all the small details like Thumb screws, Grommets, HDD/SDD Trays etc.
It is Simple small things like that is what sells Cases........Case Labs was the Only one to Do it Right every time......sadly they got taken down BY A-Holes Not paying them....Anyway Consumers are willing to pay a Extra If the Case is Well thought out, Good Quality & the workmanship in the product is Top Notch! So to the Other Case Makers STOP Cheaping out on the small details!!!
Also Great info and Mini Review Wendell !!! Cow}:-o)

Thanks for the humor! It was puntastic.

I order you to be happy!

I usually stuff all the other small boxes or accessories into the mobo box of the build. Everything usually fits nicely, and if I ever need something, or remove it, I have all the things in that box for that computer.

Be Quiet seems to really be knocking it out of the park as of late with these small quality of life features, like a mesh front, easily accessible fans, all of these easy to pop off panels, etc. If I wasn't a SFF nerd I'd love to build in one of these.
Also, you weren't joking about Wendell being silly in this review Amber. You've got a fun crew to work with. :)

I believe noise is for bystanders and that's why headphones exist. With this in mind, what if you put a Delta as the rear exhaust?

This is such a good video.

Aside from this being something that might interest me, still looking for a case for my next build. The jokes were on point and the goofiness was great. Loved it, thank you.

This video is a rollercoaster of emotion. I love it.

I can put laminated glass in most cases its alot more quiet than temperd glass. But it is heaver and it is custom cut to fit. It makes a big difference.

I feel like that may have been a comment, aimed directly, at Steve.

Wendell's sanity on day 395 of COVID

I thought we were an autonomous collective.

for the algorithm

I hit the LIKE button the moment he busted out the "appealing" joke. I had no choice.

the third person external monologues are why I love Level1.. we all feel this way hahahahaha

Missing a pile of at least 14TB HDDs :)

You peeled the glass at the beginning ?!?... You must be new here.

Nice! Back to Form

How many extra FPS does the gear get you?

top class ;)

+1 for the fans being preinstalled. -2 for having to take them off and remount them on the other side of the radiator.

Love that SLOWWWWW dolly in, as Wendell lets us see more and more of his innerself