Комментарии:
The problem port 51820 is closed is some areas.
ОтветитьAcabei de comprar também o One Surfshark, VPN, tenho Um roteador ASUS AX7800 XTP e tenho o Wiregard, mas não consigo mudar a região pede sempre para desativar o perfil e não sei como, antes de mudar a região do IP. Obrigado
ОтветитьI can do all this for my Xfinity router? Or only for vpn routers
Ответитьis there a guide for opnsense?
Ответитьwhat about Fritzbox? (7590)
ОтветитьI click I already have key, than I see "Please create a name for this key pair to add it to your connections." why?
ОтветитьIt doesn’t work
ОтветитьWorks well thanks for the detailed tutorial
ОтветитьWould be great to see these instructions on Keenetic
Ответитьflawless explained.
ОтветитьHi,
thank you for the video
it works great
but I have one small problem I still have dns leak even after adding the dns to wan
Will this work with Deeper Network DPN?
ОтветитьI have followed this video and it appears to be working, it is on the updated firmware but I seem to have the keys ok - but can I ask - this is for all IP's on my network, how can I specify 1 or 2 IP's only to route via the VPN and all other traffic to be 'normal' - I guess it is somewhere in 'Allowed IP's'?
ОтветитьCan you post a video on the process for AsusWRT routers with stock firmware such as the XT8 mesh system? I would like to use the Asus VPN Fusion functionality to run my cameras, a Roku and a security alarm system through a Wireguard tunnel. Thanks.
ОтветитьDidn't work for me at all, even when the interface is showing some pacakges movement it takes years to load something, network shows as limited in almost all phones and i also tried using the public key from the website as someone suggested but it was worse or basically the same.
ОтветитьThanks a lot!
ОтветитьThanks for this guide, I have a GLiNet MT300N V2, but in the advanced menù of wg0 interface there isn't the DNS option...
ОтветитьIs there a way to find out if my router is capable of installing firmware to use wireguard vpn. It’s a Netgear Nighthawk mesh system.
ОтветитьHow to setup the surfshark wireguard on Mikrotik routerOS?
ОтветитьCould you please make a video on how to flash OpenWRT on TP Link Archer C7
ОтветитьHave you got tutorial videos for installing openvpn on openwrt routers? Stuck in transferring the server file to the router using pscp or winscp. Please help..Thanks
ОтветитьWhere are instructions for Netgear R7000 Firmware VersionDD-WRT v3.0-r44715 std (11/03/20)...I have a completely different interface, Thanks.
ОтветитьThank you for this video. I followed it exactly but then my internet stopped working altogether. However, my internet source is coming from a public WiFi, and I already have a different interface set up for WWAN (Wireless WAN).
ОтветитьCould this work on a Asus model RT-AC66U B1?? I am having speed problems Disney app doesn’t open
ОтветитьI followed every step and it worked fine until I turned off my router for the day, putting it on the next day, it wouldn't work, I noticed that packets are been send but not being received (RX: 0 B (0PKTS)). I started the vpn set up all over again and it worked but I hit the same problem each time I turn off and turn on my router. how can I fix this?
ОтветитьI recently updated the firmware on my Asus RT-AX86U, and it totally changed the UI. Right now I am stumbling around, trying to find tutorial(s) on how to setup surfshark on the new Asus router firmware. So far I've found NOTHING that applies to Asus's new firmware/UI. Hope to see Surfshark provide that information SOON!
ОтветитьHi there! I’ve been in love with Surfshark for almost a year! I recently upgrade my router to OPNSense and I have vlans setup for iOT and such but I can’t find a tutorial on how to setup Surfshark on OPNSense, can you please make a tutorial on it?
ОтветитьIs kill switch active here ?
What if I want the kill switch to be (off) and when the vpn server is down, the connection falls back to my original ISP internet?
Thanks
Wiregard protocol. Is it possible to download configuration data? I need it to install on the router...
ОтветитьI followed all the step to configure the VPN. the interface shows there are packets going through the Wireguard interface, but my Mac is still not "protected" because surfshark still tells me that. I also saw that it may be because my Apple products such as Mac and iPhone are using IPv6 instead of v4. Is that the reason? Help!
UPDATE: I stopped the WAN6 interface, and it worked because all my devices had to use IPv4. But is there a way that we don't have to do that? Thank you.
UPDATE 2: Finally decided to uninstall WG0. The VPN will only work when devices do not connect to WAN6, which means I have to shut that down. When it VPN is on, it works as shown. But when I have to stop the VPN, it presents a whole host of problems; such as apps still thinking I'm on a VPN, certain websites don't load, What Is My IP does not detect anything IP and just keeps churning...etc. I was so hoping I can just turn the VPN on and off with a click, but I guess I'll have to install it when I need it.
what is the result? did you do a speedtest with that setup?
Ответитьhey thanks for the informative video. i use router XIAOMI 4A on OpenWRT 22 (+Wireguard)... and i followed 100% your steps, but once i have a connection to the surfshark VPN, my internet download speed reaches only 30% of its full speed.
in comparison to that, when i enable wireguard via mobile phone app, it reaches 100% of the speed.
do you have any idea how i can improve my download speed on the router?
i checked also the routers load, but it seems to be fine...
would be happy for any tipps
Thanks for this tutorial. Guest lan lost connection with wireguard, can you help me?
ОтветитьNice tutorial. I can't wait to try it on my openwrt device. How about mikrotik router os setup. Could you please make a tutorial video for wiregurd setup in ROS's wireguard too?
ОтветитьYes, please make a video on how-to flashing video for open wrt.
ОтветитьHow to set it up on Asus RT-AX53U router?
Ответитьwhy it is not working on me?
ОтветитьDo you have a list of compatible routers ?
ОтветитьMay I know, once I installed this, how can I disable it momentarily? Is it to click on the STOP button under Interface tab? Thank you.
ОтветитьTried the latest released ASUS AX86U firmware which supports wireguard, but some how its not working don't know why. It shows VPN connected on the router, but the peer I set has broken network.. anyone has the same issue? Please 🥺🙏
Ответитьnice to see video like this.
ОтветитьI hope in detailed guides on which are the models of modems and routers and modems-routers compatible and best performing on which to install open-wrt and on how to install it, so as to really give us a great help, it would be wonderful!!
I can't wait for you to add the dedicated IP address for each European country (with dedicated and unshared stacks), with their own manual configuration of wireguard
I love you and thanks for the manual configuration of wireguard which I have been waiting for too, too long!
Thanks a lot, I followed a bad tutorial first and ended up with a broken network, appreciate the help!
ОтветитьТакая настройка на телефоне съедает 30% батарейки
ОтветитьWon't supporting an Esp32 be more efficient? I think that would be very simple to build a device that interrupts the rj45 cable and applies the VPN before any router.
Any configuration could be done using the internal Bluetooth of the Esp32 through a simple smartphone. With that, any VPN configuration current present in the app could be used on the proposed device.
Seriously the worst vpn. Any positive comments are paid shills.
Ответитьsurfshark you are the best you take customer wishes was finally wireguard manuel for router Greetings from Germany
ОтветитьI ❤️ to see 2 Smart DNS at the end of the video.
ОтветитьGood info, but one needs to be done for Asus routers running regular firmware and not ones running ROG firmware. I can't get Wireguard to run at all, as soon as it is enabled it kills my internet connection.
Ответить