How to fix common Canon printer problems, errors and faults

thanks it worked..i was just about to throw it in trash..

how do you get a canon m47?
70 printer jam to unjam

It make a very hard sound like bang

Ck ink will not work in printer?

thanks to your video,i can used my printer back.👍🏻👍🏻👍🏻👍🏻👍🏻

I have a Canon printer G2010, everytime I print it cannot print the whole text, it's always paper jammed. What would be the problem?

I plug my printer into an outlet and the alarm light came on

My Canon MX510 isn’t printing properly. It says it’s low on ink, but it isn’t. Print is very faint.

Just set up a Canon TS3320. When it starts to print, the paper goes in about 1", then stops. The printer continues like it's printing, but the paper doesn't move.. I don't get an error code. Any suggestions?

My canon MX515 printer is printing fine but when I try to use wireless it suddenly won’t print. (It is connected and starts printing but stops)

I have an mx479 printer with the 5b02 error. I cleaned the waste ink pads and reset the printer, but it's still giving me the error. I want to retest the error but I also dont want to overfill the waste reservoir. What do I do?

My canon TS5160 keeps disconnecting from my computer also when connected ir comes up with error when it appears connected, we print from 2 computers and printer works fine from other computer

Says ‘no paper’.

how do you make it print the first page first?

My Canon MG6800 had a paper jam which we have cleared, but now printer wont turn on, just has the orange error light on. Tried pressing switch on and off but nothing else happens. How can I restart the printer?

Have cannon mx922 says call service with support code b200. Anyone else have this issue or how to fix?

Have got a Canon Pixma MG4200 Printer. Used to be okay printing. Got some compatible cartridges, not used it for ages but now it prints terrible. I have re-filled both black and colour cartridge and cleaned print head on each cartridge but still dreadful. Black ink is hard to see. I am thinking is there anyway I can clean the actual sponge pads inside the printer where the cartrdiges sit in top? Don't want to throw the printer away it must be fixable surely?

MX 420 stopped working, so I ordered a new power supply. It still doesn't work, even with a different power cord, and I don't seem to find any Information on how to disassemble it to further check the electrical system. I'm looking for solutions to this problem.

I have this printer and my printer is now showing horizontal streaks across the page when ever I print something. After all the cleaning and nozzle. It is still happening and also ran out of ink while doing this.

Any chance you know if there is a way to always print images on standard A4 - at the moment I always need to change to a pdf to print which is a major hassle

Canon just stopped supporting this printer. I hate Canon so much. They made my entire experience complicated. Using the printer, understanding how to fix simple problems. Getting support from their "award winning support" what a fucking joke. Never buy another Canon product I swear.

about 3 years old, problen started a year ago

MX512 randomly starts cleaning process when bumped or moved in any way. Display indicated "cover not closed". Need a solution to fix this problem.

How can i fix my canon? It doesn’t let me press any buttons

We have a Canon Maxify MB5020 printer. Installed a non-Canon black cartridge and everything was fine for a week. Now we get the flashing yellow light, no printing, and error message B504. Have tried everything.

Hi I have a canon mg3200 and i have replaced both ink cartridges and they are still printing very faint, i have done the clean nozzels thing but still very feint both cartridges showing full on printer preferences dont know what to try next

I have a canon TR8560. Once it prints a document the printer queue says the document is still printing and prevents another document from printing. I go into the print queue and delete the document which takes about half an hour and then I tell it to print the next document, and I start the process again. Any tips on how to fix this please?

I can't get my TR4520 PIXMA Printer to copy; nor an old one MGS322 to copy. What's going on? The TR4520 is new; the other old.

Still get message, print head wrong.

PRINTER SCREEN IS BLANK

It Actually Didn't work at all !! I had the issue with my canon printer i tried all the steps after all that i have to contact Canon + 1 "888"405"9844 . They helped me and your video guide me the steps to follow which makes me happy today. I appreciate that. thank you .

My printer is saying it’s out of paper when it’s not so it won’t print, can you help please with that as I need to print an important document?

Canon MX 432 The cartridge door will not open and the message reads Blk ink out. What do I do?

PLEASE HELP I have a Canon Mx410 it says error 6000 and i dont don't know what to do please help its for homework😢😢

I have a Canon MX450 that is locked up. Start button flashes on and off while sounding a chime. I have tried the reset procedure to no avail. I have also unplugged it for a time.

My Canon Pixma MG5750 only prints in pink. I have always used Canon and compatible inks but I have bought 3 sets of inks from different suppliers and they are all the same. I have done everything that suppliers have recommended like pricking the air hole and touching the ink outlet with a damp cloth. I have done nozzles checks and none clogged and the printout just comes in pink and grey. I have used different software programmes and now I am about to launch this printer which is actually only 3 months old! Help Please!!!!

pls i need your help urgently my printer is showing both the orange light and the light white at the same time and the catridge thank is not moving is showing error code c000 what can i do pls is very urgent thanks in advance

Maxify 2020 I keep getting error 5205. Removed and reinstalled ink cartridges. Powered off and on multiple times and I'm about ready to throw it out the window. Please help! TIA

I have a canon mx922 that won’t turn on. How can i trouble shoot this?

mx922 message "top tray is empty" I don't use the top tray. The bottom tray is fill but still will not print.

Thank you! It works now

anyone know how to fix a canon mx882 that will not turn on no matter what? I already unplug from the back and from the surge protector (for more than 20 mins). I even tested the surge protector outlet with another plug and it works. I plugged the printer to another working outlet and it still will not turn on. Anything else I can do? or is this the end of my printer?

hey i have a canon mp230 and it seems to be stuck? since the cartridges doesn’t return to the middle once i open it and it constantly flashes a orange and green light when it’s on any clue of to fix it?

MX922 will not print.  Cartridges are full Used IINK cartridges for a long time.  Worked fine.  Magenta went dry, installed new IINK cartridge.  Would not print.  Installed Canon cartridge.  Worked fine.  Do I need to go buy and change all the cartridges to Canon?

pressed on the cartridges and it started printing. Yours is a different printer but it worked. Thank You!!!

How about a canon printer not turning on?

canon mx420 sensor error paper, any solution about it

the ink cartridge carriage does not move so unable to replace ink cartridge.

Been getting error code 2100 on my printer, I’ve always used the same printing paper and 8.5 x 11 is set on printer settings which is the size of the paper I use but it won’t print out anything? Any advice on how I can fix it?

I keep getting the error code 1403 The type of print head in incorrect. Install the correct print head. I have never done anything with the print head. All ink cartridges are full. I have checked each a few times to make sure that they are properly installed and they have clicked into place. Please help!