22-in-1 Bibury Multi-Tool-2022/2023 Brand New Multi-Tool!

Damn bro, all is good but combo blade is such a let down for me.

When will you upload your next video? I'm waiting haha

When will you upload your next video? I'm waiting haha

Don't like the bit driver.

Deal breaker, no phillips screw driver.

i i also had the L oht. i dreamed about L signal but when i saw this bibury. i love it! granted im just a regular office guy weekend warrior whose multitools don't get really any action in years. so this bibury is perect already for me!
i do notice its sorely lacking to hold bits in a vertical way. ( not impresed with the horizontal)
did some experiments though, hopefully, in the future they will offer an adapter to one of the inside tools so that it can hold a .25 in bit.

Chinese manufacturers ripping off the design of american made products and profiting, and you guys are out here giving them your money...

It would have been smarter for them to keep the bit driver as it was and have a 1/4" hammer bit.. or make a way for the driver to lock at 90 degrees, be pinched by the two handles for extra stability, and design the side flat and hammer like. Honestly, with a Philips bit in, I can lock it at 90 using the groves in the base of the tools, so if the side of the driver was bigger and flat.. hammer.. Or even make the bottom of the pliers the hammer surface like the GOAT tool.. because let's be real.. you aren't framing a house with this.. hang a picture, this that.. it's designed for light work.. does give me a mod idea for my Multiforce though.

If only it had a non serrated knife

Just got the hx outdoors one of these in black awesome tool for 33 quid

Is that the budget brand from leatherman? looks very like made by leatherman 🤔 or is it a cheap China clone?

Got one from Amazon, i had the same file rubbing against the body of the tool on the diamond side

Never trust these cheap knock-offs, they use soft metals and you could easily get injured..

In my experience Bibury has great designs, Leatherman could take some lessons actually...but their quality control looks made by monkeys: the main blades don't lock very well, dancing when you're using it, opening when you're not; the file quality is under other chinese brands like swiss+tech etc.

I bought one as a Leatherman Signal type tool. I wanted something as an emergency tool that didn't cost as much as a Signal but was still reasonable quality. It's obviously not as good as my Leatherman but for the price it seems to be great value. It's sturdy, the tools seems solid and it's something I can stick in my emergency bag that should work when I need it. For the price of a Signal I could buy almost 5 of these Bibury tools where I live.

The Leatherman is smoother, nicer construction, has a long warranty and all parts can be replaced. The Bibury on the other hand doesn't have this but is fairly inexpensive and I won't be heartbroken if it gets lost and I won't think I wasted my money if it just sits in a bag in case I need it.

One thing that I noticed is that while there's a ferro rod and replaceable wire cutters I can't find them available for sale separately. Perhaps they will become available in the future. The hex bit slot, as you mentioned, has no retention of any kind which is annoying. The Signal hack of putting a bit of thin thread in the hole should fix that issue; or perhaps a bit of blue tack. Oh and the whistle is pathetic, I'll pack a proper emergency whistle.

This is Annoying in the U.K.
We don’t have as big of a selection as you guys.

What do you think is the best cheap multitool with one handed opening features?
And a deep carry clip like leatherman, or do you think you could get replaced clips?

I’m sure I’ve seen some that even come with bit drivers all for 30-40 so fairly cheap and some were copies of the Wave.
With Pouches.
But they aren’t for sale any more!
So trying to do more research into the subject again.

I like the price but these none leatherman tools need to figure out a way to get a better plier detentions. they get bend over too easily.

I find that the glass breaker really creates a hotspot. Im thinking of removing it. What do u think ??

Got mine and returned it the same day. File rubs too much against the liner and scissors don't work at all (spring doesn't stay in place).

Bottom line up front: This is a very poorly designed multi-tool with design flaws that limit the effectiveness of some of the main tools (pliers and screwdriver bits) with poor quality control and this multi-tool is very sub-par compared to earlier Bibury multi-tools. I will not use this in the customer survival kits I build and sell due to the deficiencies noted below. Don't get me wrong, I like Bibury and have all their other multi-tools (since I sell custom custom survival kits online, so I buy lots of survival tools to evaluate them.), but this one is not up to the quality of their previous tools. It may just be the one I received, but even if mine is an aberration, then it means their QC has gone down hill and the design is poor at best.. The good: the tool feels heavy and well built, it's nice to have a striker rod built in, the replaceable wire cutters are a big plus (no additional blades are included though), the pliers seem great and the main tools (knife, saw, file, scissors) are on the outside and accessible without having to open the tool. The bad: the design is poor in several ways (the bit holder only allows for use where there is room enough to get the entire tool in and move it around, there are no Philips tipped screwdrivers (or 1/4" bits of any sort included), the bit holder/glass beaker head and hammer seems to be made of hard plastic, so the hammer is of very limited use, when using the pliers the glass breaker stick into the fleshy part of my hand and so I cannot get a really firm grip on the plier handles which makes using the pliers much more difficult and painful, and limits the usefulness and effectiveness of the pliers. When unfolding the plier arms/ handles for use, the right handle (with the front of the tool facing you) is very difficult to unfold and it appears to have been tightened too much at the factory. The other handle/arm works fine. This indicates poor quality control and poor quality control checking by Bibury. This tool just has too many negatives plus it is a lot more expensive that other Bibury multi-tools that are much more effective tools.

Good idea and very nice outdoor multi tool.

given serious Leatherman Surge/Signal combo child feels from this. Is it bad? I don't know for sure but I think it might become a folly if they aren't careful

My only question is worth the money? What is their warranty? I do have a couple of Bibary but can’t remember what there warranty is. I kinda like it and want one the bit holder is a easy fix a thin string looped in the hole and tied off will keep the bits in.

The hammer is cool feature if they could made it rotate and the bit driver be on the 3nd that rotated out it'd make think bout trying it

It looks like they took bits from 3 or 4 Leatherman models to come up with it. Not that it’s bad thing. Looks like a really decent budget tool.

This tool looks awesome I could use the hammer on this tool for cracking open walnuts and pecans

Hey guys I'm looking for a small multitool with a good bit driver, pliers, knife and scissors. Think Gerber armbar drive but with pliers or if the sog powerpint had an extending bit driver. Any recommendations? Thanks guys‼️

What I like is Surge implements and Signal capabilities in a Wave package. The bit driver isn't there yet like you said. Does Bibury specific the steel used to manufacture this multitool. I really like the 420HC in a multitool. Also, the curiosity killed the cat, I just purchased a used Leatherman OHT. I'm not a fan of sliding pliers but this tool has me wondering... Any thoughts, advice or input you have about the OHT good and bad?

Great price point. I'd like to see how it holds up.

It looks like Leatherman signal but it's nice

The big problem with this kind of copying of Leatherman models (Wave+, Surge) is the fact that it is impossible to find replacement wire cutters; stupid. Among all the Chinese manufacturers, the only ones to offer it for their models are Roxon and Ganzo. Regarding this Bibury, it is of little interest, I pass my turn.

bought Meow!

Somebody please make that fero rod slot into a bit holder and this might be a near perfect multitool.

I like Bibury and really like the prior version of this tool. but they really threw the baby out with the bathwater here... the nicest thing about this previous version was the bit driver. Even the Gerber drivers, which rock, could not lock into two distinct leverage points (positions)... Bibury has to take the plunge and believe in themselves enough to start seeing the success of their own developments. With that bit driver you had reach and a tool you could use as a full service Multi...

I don't even mind the price point but they need to recognize their strengths and not just put more stuff on the biggest tool they offer... the diamond file is a nice touch.

Look nice 👍🏻

Is the "hammer" metal?

Damn... this would have been better for my kids than biburys wave clone. Oh well. Maybe they will get both for Christmas.

This looks pretty cool

Can someone give it as a present😄😋😋 really want one