Комментарии:
Great video, thank you! So, I bought the Ispring filter system. I’m on a well. I’m only washing my cars. Probably only use the filters for the final rinse? My question is, do I need to fill both filters with resin? Can I use one for the sediment filter? Sorry if this question was already asked! Thank you!
ОтветитьI love the M3 in that color and the orange interior. Looks awesome.
ОтветитьHow high is the pressure on that ? Your going to destroy those wheels!😮
Ответить64 ppm TDS from the tap?! Wow! I live in CA and I'm getting 422 ppm TDS from the tap. 64 is amazing! Thanks for the video.
ОтветитьGreat video! Do you have the link for the part with tds sensor PVC and adapter? I've been looking everywhere for that pvc tee.
ОтветитьDo you have a video on the actual build? I’m still confused on the whole process..
Ответить👍👍👍👍👍
ОтветитьWhat is the pressure washer that you’re using? Do you use this pressure washer on the paint as well other than the wheels. It seems like the pressure is too high for the paint. Although I have use a gas pressure washer with 2700 PSI on my paint and I have never had any issues with my paint.
ОтветитьI wish there was one link to purchase all at once!
ОтветитьDomestic water or well water?
ОтветитьWhat brand/model you are using for the Turbo Nozzle?
ОтветитьWould you recommend this method for wheels that are ceramic coated?
ОтветитьSo would you say unit drops PPM about 50 ish unites Phil? Or more than that?
ОтветитьSo this is probably a stupid question. Does the unit have to remain vertical to function properly? I have been thinking about doing something like that to where when it comes time to do my final rinse I unplug the garden hose from the pressure washer and put this setup inline however, looking to just lay this on the ground while using don't really have anywhere to permanently mount it.
ОтветитьI’ll be dropping a video soon on how to regenerate di resin for only $50 and for those with smaller filters only $30. I’ve been doing it for months now.
ОтветитьThat’s a damn good way to destroy the finish on your wheels ! That tip is for cleaning concrete not auto detailing
ОтветитьThanks a lot Phil!
Can you do 3 cartridges to bring TDS to 0???
how long the resin gonna last? How many car will its last until the next change??
ОтветитьDI units are great in cr spotless only problem is when your water TDS reading 300ppm like mine simply not cost effective resin has almost doubled in price over the last year
Ответить❤️❤️❤️❤️
ОтветитьAfter watching this video my in-line filter broke for the umpteen time. Nothing like a clean car, clean garage, then having wet carbon particles all over. No more. The timing of this video was perfect!
ОтветитьThat's awesome! Thanks!
ОтветитьI have 260 PPM. I haven’t found any system that wont fail after 2 washes.
ОтветитьDo you have the link for the little black Y splitter that is attached on either end for the TDS metering piece?
ОтветитьWhats the resin capacity on each one of the refillable housings? Does a single 1L bag of resin fill 2 housings?
ОтветитьI would imagine anyone concerned about the amount of resin they go through could put the filtration on a cart or mounting system to their pressure washer to minimize the amount of treated water that ends up in a long hose between the system and pressure washer, thus likely wasted. My water is over 350ppm (common well water) so, that is a consideration for me. Any economical pre-filtering would be critical as usually, the resin is the expensive part of consuming a large quantity of water. Dealing with water this hard isn't a lot of fun!
Thanks for the video and information!
Just so you know most places these days are changing over to chloramines in the water instead of just chlorine. A regular carbon block will not remove that. It will pull the chlorine out but the ammonia left over will pass right by into the resin and it will burn up the resin much faster. So anyone looking into this you need to find out what your water company is using chlorine or chloramines for the disinfectant.
Ответитьexactly what i’m looking for, awesome content and thanks for sharing!
ОтветитьWhat turbo nozzle is that?
ОтветитьI just got one yesterday I have you wait until Sunday it’s rain here today I can’t wait to try it
ОтветитьGreat video! I’m going to start my build today! I have a 22 Mach 1 with the handling pack wheels. Very difficult to clean like the M3s. Can you recommend a good pressure washer and foaming attachment?
ОтветитьDo you happen to know what the TDS is of your rainwater?
ОтветитьSo can I just continue using the camco filters or do I need to switch?
ОтветитьGreat video and love your matching shoes with your car Phil.
ОтветитьDo you have the links for the white L brackets and the Black T pipes for the TDS readers?. Great vidoes
ОтветитьJust to confirm as the measurements look to be the same between the double unit and the single unit, but does the empty cartridge for use with the resin fit either one? I only have space for one and would prefer to use with resin (I think likely the most effective option).
ОтветитьDo you have a price per gallon estimate for that system? Not sure if you mentioned it.
ОтветитьDamn, 2k psi and you're that close to the surface. Living dangerously
ОтветитьInteresting - I have been hesitant to use my pressure washer on my car, especially on the wheels - Concerned that soap/detergent will be forced into brake and bearing components. I’m retired, so I have plenty of time. Takes me less than ten minutes per wheel to carefully clean & dry complex Mustang PP1 black painted wheels. Leaf blower disperses almost all the water to help dry the wheels. I’ll have to give consideration to installing an up graded filtering system. Thanks & Happy Motoring 🤠
ОтветитьNice!
Ответить