Комментарии:
I just bought and built it and I cannot believe how quiet it is. Money well spent
ОтветитьI think I know the answer but this case or Lian Li PC-O11 Dynamic? My only concern is that Lian Li might not for Be Quiet Pure Rock 2 FX cpu fan
ОтветитьSeriously, finding a case that can fit more than 2 HDDs is becoming a tedious and long journey. I have found a couple of them but they are humongous (Phanteks Ethroo Pro 2, Thermaltake Core V70, and the small but still to wide Lian Li O11 Dynamic EVO).
ОтветитьMore vid cases, please. But cover great/bad flow cases, pls.
ОтветитьIt takes me a while to find the right case because I always something in mind because I over analysis the case. What ssd's can fit where? Are they in the way of air flow? What is the biggest rad can I can fit?
ОтветитьBe quiet and all this cases that have front mesh, will catch dust more than others, if you have almost 0 dust envoierment it's good,
Ответитьthats such a nobrainer tbh
Ответить@jayztwocents why are they not building this horizontal. I would like to have the airflow of this with 2 front.. and 1 back exhaust and one top exhaust. With a noctua nh d15 cpu cooler. Wont the weight of a big 4070 and the noctua d15 cause too much stress on a motherboard? Or am I overthinking this?
ОтветитьHas anyone tested this with air cooling only -setup?
Ответитьsmoll box
ОтветитьThese cases are nice but have a scarily standard flaw in the design. A lot of case mfrs these days are shorting you 1 full USB per bank on the front of the case as in this case your USB3 header is used but they give you 1 USB slot instead of the normal 2 ( 2 ports per header). This usually ends up in the nice but pass category especially for customers or even myself who use those USB ports. It's a very cheap way for them to cut costs and robbing you of a port for no reason and says to me be wary. I love be quiet products but this case is a slap to the customer and they know it. There's no reason for them to do this when they could save money in other areas like removing that ARGB strip in the front and making the whole face open mesh giving better air flow in the process.
Ответитьyes components dont cost an arm and a leg anymore, just an arm lol.
ОтветитьYou can't vertical mount without heavy modding anyway.
ОтветитьBut Jay doesn't the top come off?
ОтветитьThis or h7 flow
ОтветитьAmazing case I just bought one of these. The build quality is supreme. BUT you are wrong for a few things - the air flow is not good at all. The hot air from the VGA is blasting directly to the glass and has nowhere to go. The case fans ate uncapable to catch this 85deg C air and extract it effectively. Aaaand other air flow flaws
There are other problems with this case, but the air flow is the biggest one.
that cover on screws GREATLY help for gpu sagging
ОтветитьDid I just get jays permission to create a cardboard box pc build? 😂❤
ОтветитьHi whenever I click the Canadian amazon link it bings me to amazon's landing page only
ОтветитьI don't understand why you'd filter the top exhaust.
ОтветитьCan confirm. Build with this case and be happy!
ОтветитьIts a great case except if it was like just 1 cm longer then it could fit 4080 while a 360 radiator is at front. And the radiator could be placed on top, if the case was like 5mm longer. I don't know why they didnt make the case just slightly bigger
ОтветитьWho still uses 3.5 inch HDD in their desktop?
ОтветитьThe USB 3.1 is type C not A. There is only one type A on the panel. Sort of lame.
ОтветитьI grabbed the lian li 011D-evo case last month, because it has a significant percentage of glass. Then I ordered be quiet light wings and psu.
ОтветитьNo reset but instead rgb controler button? Wtf?
ОтветитьWhat i do if the pc needs a reset without the reset button?
ОтветитьI've had the same old cooler master case since 2008. I'm upgrading my system this year and decided to finally pick up a new case rather than putting fresh parts in an ancient box. This case looks like the winner for me. I love the look of it and it comes with 3 fans which seems to be a hard thing to find at a decent price point. Thanks for turning me onto to this one Jay!
Ответитьi put Arctic II 360 mm
ОтветитьI’ve been looking for a smaller case yet big enough to hold my 360 AIO and the 3080 so I might of just found my new case
ОтветитьDoes it have a fan header? Like a multi-conector
ОтветитьMost replayed for a reason. Other than the USB 3.0 and HD Audio cable, I couldn't figure out the cables. THANKS JAY lol
Ответитьcan this case fit a 360m front mountted radiator?
ОтветитьThank you for the insights. Especially the sound quality from cables
ОтветитьTy
ОтветитьIs there any motherboard and cpu that support both ddr4 and ddr5 memory so i can just use ddr4 ram and later on switch to ddr5 if i want too 😉
ОтветитьI bought an rtx 2060 12gb version for just for gaming don't know it was right decision or not but what intel cpu and also good motherboard to work with it anyyone can help me please 😀 😄
ОтветитьI actually purchased a 500DX after this video and I've loved it since. One heads up is you CAN fit a 360mm radiator on the front like I did but you'll have a couple of issues especially if you want to do tubes down (as you should) and that is if you have a long GPU, you will need very long tubing and it has a pretty tight space to turn it all the way up and towards your CPU. My solution was to get the Phanteks vertical GPU mount, do some case modding and run the tubing around and behind the GPU. In the end i still get very good temps (with an i7-12700K too)
Ответитьwill the front of the case fit Phanteks T30 fans?
Ответитьdo I have to connect the Sata cable to the PCU? or the Argb Cable only? It was the only cable that he doesnt mention in the video :S
Ответитьhello, how can I reset the PC when the PC case does not have a reset button?
Ответитьwhat about EMI shielding. can be disruptive and also cause biological health conditions.
Ответитьnot so boring when you loose 1000's of dollars worth of parts!
ОтветитьSeeing this, I kind of regret buying the Corsair 4000d.
ОтветитьDose anyone else still prefer solid side panel cases.
Ответитьto anyone interested in this case they just released an updated version called pure base 500 fx its pretty much the same thing but with built in RGB lightwings fans and they are running a promo that makes the case 119usd up till the end of month (149 normal msrp)
ОтветитьI would move the front fan to the top and buy a aio
ОтветитьLol I just tested my mesh dust filter by blowing on it and my god it blocks so much air. I even slapped it on the front of my pc and the airflow just dies.
ОтветитьNice cool case.💦💙
ОтветитьCan i fit a micro atx motherboard?
Ответить