Тэги:
#fuel_distributor #fuel_injection #cis #kjetronic #kejetronic #intake_leaks #vacuum_leaks #injector_seals #kjet #k_jetronic_fuel_distributor_adjustment #k_jetronic #k_jetronic_injector_cleaning #k_jetronic_fuel_injection_system #k_jetronic_troubleshooting #k_jetronic_fuel_distributor #ke_jetronic_fuel_injection_system #ke_jetronic #ke_jetronic_rebuild #vacuum_leaks_symptoms #vacuum_leaks_intake_manifold #ke_jetronic_troubleshooting #badgertronix #ke_jetronic_tuningКомментарии:
How do you adjust the height of the plate? I took away the plate but could not figure it out (KE-Jetronic Audi 100 2.0 E 1990)
ОтветитьThanks for the informative video, is it possible to replace a k-jetronic directly with the ke-jetronic fd system if you k-jet is faulty?
ОтветитьWhere did you get those braided distributor hoses? The ones on my e21 leak fuel and the parts are no longer available. Currently stuck with no viable solution :(
ОтветитьI'm so glad that electronic fuel injection superseded this system. It's far simpler and straightforward to deal with
ОтветитьHigh fuel consumption was problematic
ОтветитьAwesome video. From what i know it uses fuel pump pressure to inject fuel right? I wonder how much it can distribute with oem and aftermarket pump. Keep it up.
ОтветитьMy system pressure is good but when I turn the valve on it drops for a second then climbs right to system pressure cold with electric connector to warm up regulator un plugged tks for any help . I think I will have to repair war but want to be sure
ОтветитьGreat video. Got mk2 jetta cli 16 valve kjetronic myself.
My car didnt want to idle.
However if i manualy work the sensor plate and override start relay the injectors spray.
I check for fire and firing order. All good. Fuel supply at the onjectors all good. No fuel coming from injector lines.
When does fuel come from injector lines if all are good on the system?
Does it need to be timed to the engine firing order?
ОтветитьIs it possible to adjust the amount of fuel per cylinder?
ОтветитьK-Jet for life!
ОтветитьMy 1978 5-cyl Audi 100 5E has sat for 26 years. I believe everything has to be taken apart and inspected. Even if the fuel quality in 1995 was better than now 😃
ОтветитьIf all injectors are firing at the same time isnt that uneconomical? What about bore wear from the fuel washing the bores continously?
ОтветитьLove your video, very helpful, but can you comment on a 1976 911 with such system, is the a car worth considering ? Thanks
ОтветитьDo you know anything about the Volvo k-jet set up..? It's mechanical fuel injection but located under the intake manifold. It's an 82 Volvo 242 2.1 with a cold start issue 🤷
ОтветитьNice little overview, Thank you, good job.
ОтветитьКЕ !
Ответитьmy Audi b3 coupe broke down today new fuel pump and filter fitted but still broke down revs cut to idle !! as if fuel pump not working but it is !!
ОтветитьWhere canI got the kit?
ОтветитьIs there a tool to put them back in
Or u just gotta push really hard?