Комментарии:
To anyone having trouble with this, you have to press UP into the tab, not pull on it. If you still can't manage, just pull off the front panel and remove the filter from the other side (be careful to not rip the wires out the front IO).
Ответитьthank you for making this short and sweet!
ОтветитьStraight to the point!
ОтветитьGlad I didn't commit to prying it off with a flathead screwdriver
ОтветитьI needed to add a fan behind the front filter 4 years after i bought this case. Your video was a god sent.
Ответитьdude how about the top
ОтветитьYeah…. I just ended up ripping out the entire front panel when I tried this. Nothing catastrophic but this guys finger strength must be ungodly to be able to just press that lever without ripping off the whole thing
ОтветитьGood Video, easy to understand, not wasting any time. My fingers don't fit through there, but a bit of trickery (and a friend of mine) got it to work out XD
ОтветитьNice, super easy. I can't believe I didn't know this. Waited 5 years to clean mine, in part because I thought it was impossible. Finally the shame caught up with me.
Ответитьhad it for years, just learned something new thanks
ОтветитьYaaay so easy
ОтветитьDon’t be scared it works
ОтветитьBruh you make it look so easy I instead took off the whole frame and im trying to take off the front mesh because theres cakes up dust on the foam…
ОтветитьMan my front broke when it tried to "easily" remove it
ОтветитьThank you for being so quick
ОтветитьI did it and now the clip is broken :(
Fractal, please help me :(
Watched this 100 times and it's still like magic to me.
ОтветитьPeople are funny I didn’t need this video at all I was looking up where to find a replacement for it
ОтветитьI almost burned the house down trying to find the damn slit to push and pop this off!! Nice case but it shouldn't be this difficult to remove anything on a case
Ответитьstraight to the point i like it thanks!
ОтветитьThe model I have removes from the top, not the bottom but thanks it’s a good case. I also discovered I could swap the side the door opens from!
ОтветитьUgh, please consider changing this design to something like the FD Define C so that it's easier to remove and clean (including using the mesh filter). And please remove the giant, obnoxious logo or at least make it optional. If I was using this in an under-desk cage mount like I do with my Define C I would have definitely returned it as removing the bottom filter each time to clean the front filter would have required too much effort.
The case and airflow is great, just fix the terrible front filter access. Next time I remove it I'm going to file off most of the plastic hook and see if that helps...
how strong is this guy? i know i havent worked out a day in my life but i feel as if im going to break it
ОтветитьAhhh, and here I was taking off the entire front panel to install my fans, haha. Well next time I will know better.
ОтветитьThere is an ungodly amount of force required to do this
Ответитьhow do you remove the filter from the front door on the meshify XL once you have removed the door from the case? the frame of the door blocks the filter being removed
Ответитьshit design way too hard to push
ОтветитьMy fingers are bleeding opening this, I wish I never bought this case
ОтветитьGuys if it feels like its going to break... Just keep pushing. You're pushing on a tab that's supposed to bend and unlatch from whatever is keeping it on. It just takes a stupid amount of force. Good luck.
ОтветитьLol thank God for this video. The instructions that came with the case weren't clear at.
ОтветитьAwe wish it had a cool pop out system like the top filter
ОтветитьThat does not come out that easily
ОтветитьSuper easy, pretend the plastic is a handle and just let it bend. It's made to bend.
ОтветитьHave that case for a year and only now i know it ...
ОтветитьTo remove the front dust cover, you pull the bottom dust cover off and then push your fingers in from the bottom with some force. There is a 3.5 inch clip. Love this case but the instructions for a first time builder are disappointing. God speed!!
ОтветитьOne complaint I have as I've just built a new PC with this case is that the wire for the 2 USB 3.0 is really too short (I know this video is about the first panel but I really want to get this out there). I just barely got it in. Later I have to unplug it as it was getting in the way of the other cables/cable manageable while unplugging it was very hard. I emphasize VERY as when it came it took off the plastic guard on my motherboard and bent on of the pins.
ОтветитьI have this case and have removed the filter, but: the actual filter is between the front mesh and some plastic that holds the filter in place. How is the actual filter removed and cleaned, if at all possible???
ОтветитьBro thank you. You saved me from having to put in extra effort of finding my manual
ОтветитьAnd the water parted
Ответитьi snapped mine.. guess ill get a pretty green one now xD
Ответитьis it possible to remove the front panel for the focus g?
ОтветитьI ripped the filter mesh out it just blocks air flow too much and looks better as well. You cant get to the sponge which is just very poor design
ОтветитьIf I pull harder I will destroy the whole fucking thing.
ОтветитьBeen trying for ten minutes shit you not. Won’t come off
ОтветитьDid my first build in it, just wanted to rotate my fans thank god this is a feature
ОтветитьIt is a bitch to open up.
ОтветитьBecause the instruction manual didn't tell me how, I ripped the entire fucking front off the case like an ape.
ОтветитьFinally I managed to open it by using a hammer.
Ответить