Radiomaster TX16s • How-to setup an RC Plane with OpenTx Plane Setup Wizard • [Beginners]

Great video!

8 min after I enter model name and no image I see the timer set but I cannot enter anything on the line Timer 1 I have to start with Name I have no idea what to do tks

your videos have been very helpful but I do have a question.

I am setting up a plane that has dual servos for elevator with no "y" connection as well as no "y" for ailerons. is there a video to help me with that? thanks in advance bud!

I have not watched all your videos, but they are so good I will try them all. I'm somewhat baffled. I currently have 4 airplanes setup and ready to fly on my TX16s. I have been trying to add another plane, but it will not bind. I tried 3 different DSM receivers, and they will not bind. What am I doing wrong?

בדיקה לראות אם זה מפורסם

Just bought the Twin Timber. Got it hooked up the the tx16s and everything works. Just got the reverse to work yesterday. Where do I find what the acronyms stand for when I get into telemetry?

Hello, I am interested in the Radiomaster TX16s and I wonder what the difference is between the ELRS and the 4in1 version
what makes different?

Another great video, sir. Thank you so much. Could you please tell me how to turn On voice notification for switches? My TX16s is silent when I toggle switches

Hey if failsafe mode is not on model setup can I populate it? If so any idea how?? Thanks

Great video, been watching this a few times. Now to do Throttle cut off.. but quick question... Not finding info on what does "Insert Before" or "Insert After" in the mix tab. Really confused on that one. I'm a long time (12yrs) with Spektrum, and have a Jumper TX16, and now just upgraded to Edge with the new Radio Master XT16S, so basically it's the same premise, but what does that actually mean??

G’day, really sorry that I purchased this radio. Thanks for your video’s but feel that the programming involved is far to involved for modellers which is an absolute shame, as it’s far to difficult. I’ve become used to Spektrum, and started off with a Skyleader in 1969. I’m not a programmer and hope all the other radio’s don’t go the same way as it will be the end of my flying which would be absolutely terrible. I’ve not even been able to update the firmware, but guess that it doesn’t really need to be done at this stage. Hopefully I can sell this tx, as I’m certainly not going to be able to work with it. Thanks. Basil.

What are the differences between flaps and ailerons

Yet another great video. I have a power high speed glider (HK Excalibur). I used the wizard and when I came to tail, I chose V-tail. My receiver is TAER. When I bind the plane, nothing works right. No idea why.

Hi John!
Thanks again, learned this from u today...✌🏾😎
Liked,
Subbed,
Shared,
Notified,
Fly safe!🛩️

John is the best in the business 👍

Great video and its very informative. However, I am having a problem getting the throttle to work.

dear i have TURNIGY 9x8c v2 , 8 ch full range receiver and also hobbyking , HK- TR 6A V2 , 6 CH , digital receiver system , pls can i use them with radio master t 16 ? and how i can use them , which protcol ? and if these work , so can i also need to fine tune FERQUENCY . pls guide , because i have more then 14 receiver of these kind ,

ALSO I AM USING EDGE VERSION ? pls guide to me i am new , EDGE VERSION IS GOOD OR OPEN TX ?

Hi John, Your videos are a huge amount of help in my attempts to master OpenTX. Is there any way, having used the Wizard to set up a model,earlier

Having unintentionally reset a persistent timer, is there a way by which I can re-write the old total (in this case total airframe hours) and continue UPWARDS from there?

This guy is amazing , having no problem to understand

Really great video series about Radiomaster TX 16 S. You are really the best on you tube. Your video will be very helpful with my next radio transmitter Radiomaster TX 16 S.

Wow absolutely great video instruction. Thank you .

Towards the end of this video you talk about resetting the flight timer.... How do you do that?

I need some help please . I have a radio master TX16, I am trying to bind it to a spectrum AR631 . The AR631 is from a crashed areoscout I had . I bought a xfly glaster and I want to use it in that plane . I am getting them bind up, but the motor does not run and all the channels are all mixed up even after setting it up AETR set up . What am I doing incorrect.

Really need some help here

Just bought this radio , and your video has been so helpful . Is it possible to tell me what order to look at the videos in ? What the next video to watch after this so that I an not getting ahead of my self .

Thank you, so much, excellent work...stay safe.

I dont see plane wizard at transmitter although have SCIPTS/WIZARD/plane folder

i need some help on my home screen my model name i messed with widgets no my model is not seeing my radio

Thanks for the good tutorial.
You are the only person so far that knows what the six red buttons are for!
Even the user manual does not tell us.
I am interested to learn more about flight modes as I have learnt that they are specifically designed for gliders what with wind strengths, thermals and so on.
I look forward to you doing a tutorial on this aspect but again, any thanks for this tutorial.
Peter

do you have a video on how to set up safe mode on a Conscendo glider? Binding is ok but setting up safe mode won't work. Thanks, Al

9

Thanks man...
Pylon racers will run 1 aileron setups sometimes, lol.

Hi thanks for this.
Very new and a little overwhelming.
I'm wondering I have no H switch listed in model setup. The switch also returns to the downward position.
I bought the unit second hand.
Is it likely damaged ?
Any suggestions welcome thank you.

thanks for that video and rest of it. it really helped me to understood way how it works.

quick question. Throttle timer - it starts counting down or up (depends on setup) once i move the stick. However it also counts when throttle cut is active. Any idea to walk this around ? i dont want timers to work while throttle is not activated.

Thanks for this!!

What a great tutorial !!! well done !! you did a great job here, thanks a lot

Great review! However I'm having problems choosing picture for new created model. I can see the picture in the folder from the SYS menu - SD CARD, but it's not on the list when I edit the model. Can you help please?

I have no plane setup in the wizard, only glider. I have the script on the SD-card and when I manually go into the lua script in TC16X I can start it from there, but not from the actual wizard. Why's that? I tried with deleting all the files on the SD-card and reinstalling the latest OpenTX but no difference than I also got an quad but still no plane.

Hello from Brazil! Congrats for the videos! A Question:
My TX16S doesn't show the letters relative to the channel. The Open TX versiona is: 2.3.11.
Its been a couple of day that i am whith the radio.

Great video! So much to learn, but really exciting! Thanks!

Hi John, On my TX16s using the Wizard to Create a new model, I can only select Glider as the Plane logo never come black square highlighted. My jog wheel work perfectly however. Any idea? Thanks

Can we use these remote on mjx bugs 5w?

Thankyou for this video, very helpful and well communicated!

Great video. Some feedback in case you don’t notice is that there’s a lot of static or hissing sound throughout the video. Just wanted to let you know in case something simple like a fan running or anything that wouldn’t require an upgrade of equipment.

I just purchased one of this and found your tutorial very very useful. it's good that some people like you put time and effort which helps a big community! thank you for sharing your valuable knowledges.
I have a little issue when setting up a 3 posituons switch in order to control 3 modes on an FMS Gyro. Would you mind giving me some help ? As this is a special request I can donate a few €€ if you want. Thanks in advance.

Great videos. They have really helped me find my way in OpenTx. BTW - I am confused regarding your Special Function example. You mention switch SH, but on my radio SH is a momentary switch. Is your switch different?

Hi! Very good Information on the radio. This is Robert Wioch. I will give you always a Thumps up. you are the best out there. AAAAAAAAAA++++++++++ :))

Can one setup the display in OpenTX Companion?