Комментарии:
xfx moment,i hate it
ОтветитьHi, Im having the same issue with my GPU, where it would crash after the PC updates the GPU driver.
Ive already tried to boot it in safe mode and used DDU to uninstall previous driver and fresh install.
Updated MOBO bios, and flashed vbios ):
I tried joining your discord but the link doesnt work anymore.
I was wondering, can I send you my card? its a 3080ti Aorus.
S.O.C stands for System On a Chip.
Not,
"Son Of a Cow" 😂😂😂😂😂
However, it's more like S.O.S
Hi! I'm quite new to your channel but I'm really enjoying going through your videos. I bearly understand most of it but find it all really interesting so thank you for posting it all 😊
I have a quick question about temps, which anyone can answer-
Hot spot and memory temperatures. I have a palit 3080 and when under load my GPU temp is about 63°c, hot spot is as 74°c and memory temperature is 80/82°c. Is this normal? I ask as I've been getting a lot of crashing recently. No artifacts, just blacks screen for a few second or a straight up crash. Thanks guys
ITs XFX not AMD :D. Garbage cooler, good job XFX. I have few rx 6600 xt with 96-100C on hotspot. Thermal old thermal paste was good, with new, the same result. ASUS card RX 6600 XT did not suffer for bad cooler.
Ответитьwould something happen but under heavier load if a graphics card had a thermal pad not making contact with the heatsink?
Ответитьthis channel is going to get millions . im sure
ОтветитьMy rtx 3090 ventus 3x crash in game , in every game . Why ????
ОтветитьIf I open a card up for repasting I just try to save the original thermal pads so this isn’t an issue.
ОтветитьI’ve done that before. 1.5mm pads are too thick for the THICC III Ultra on the VRAM modules.
ОтветитьI actully have the same ''issue'' on my Sapphire RX 5700.. on my stock cooler I have over 30c dif between hot spot and the regular gpu temp.. but I put the grapic card under water full block, not an issue any longer.
That said, the Navi gpu's is designed to pull as much heat they can, 110c on the hot spot is not a problem, says AMD.. but I don't like 110c stuff in my PC.
Anyhow.. I will always use water cooling for now on on my GPU's, full block.. good investment if you gonna have em 5+ years and OC'ed.
Can I ask a question? Is it okay to have no thermal pad on those black square?
Ответить.5mm and emery board as in nail file on lazy Susan to make a rolled edge like rounded edge table then try it again 5c to 13c maximum edge to center temp after mods
ОтветитьAnd it’s an xfx
ОтветитьAwesome.
ОтветитьHas anyone ever mentioned where to get that "Gigabyte Graphics Card Test" Tool? I suspect something maybe wrong with my RTX and I'd like to check myself
ОтветитьThat use of plastic !
ОтветитьCan't find my mx4, it's going to have to be my thermalright paste I've had for 10 years. The pads are dirty, but it's a 1080. Had a super glue back on one of the coils because I broke it off.
All the components have thermal epoxy on top of them I can't scrape off.
Maine plastic shroud over the aluminum heatsink has a 4 by 3 hole that I cut in it comedone going to need to electrical tape over
The person put the wrong size pads in the area around the gpu
ОтветитьAMD cards have the hotspot probe on another location, thats why we see high temps.
ОтветитьLove your content. Very interesting and watch you do this. Cheers😮😊😅
Ответитьwooow so 61 C is high i recently bought a used zotac 1060 temps are usually in between 60 -70 when i stress test it on furmark does that mean i have a faulty gpu oh and ideal temperature stays in between 30s or 40s
ОтветитьWhat size solder balls need to use gpu and memory ? I am new here help me out
ОтветитьI think ill have to send you my card very soon. Its such a strange problem happening to mine and i think it would make good content for you. Im already in your discord so ill sort it out.
ОтветитьHow do you fix a crashing issue on a Asus Phoenix GTX 1650 it passes furmark heaven benchmark and all them but as soon as I load up the game it’ll crash within 10 minutes
ОтветитьAbsolutely mesmerizing watching you work on these cards. I cannot imagine the magnitude of experience you've accumulated over the years. If you don't mind me asking, how did you get into GPU repairs and where does one start to learn, that just finds the craftmanship interesting?
ОтветитьI bought a cheap msi 6700xt that had consistent crash at red dead redemption 2 benckmark, in swamp area, while the old 5700xt showed super stable for years. No instability in other games, glad it showed at all, ive returned it. Now running a rock solid 6800 but living in third world countries while trying to build and keep a decent gaming pc is a hazardous endeavour.
ОтветитьHey Tony, how about making a review video about a comming/new graphic card PCB? - like "The only truth about MSI RTX 4060 Ti judged by an electronc technician"
I think some people are more interested in "what will happen" rather than "what has happened".
Sorry for my bad English, I'm a Japanese ^^;
I admire your skills, we need more people like you 👊
ОтветитьYour videos and know how is top notch. I really enjoy them. Thanks for making them.
ОтветитьKill or No kill 😂😂😂
ОтветитьAnother great video. I loved the Nvidia XFX Cards. I had an XFX 7950GT in my first build. It was a great GPU.
ОтветитьI have two 970's and both gets blackscreen in windows sometimes at 10 Seconds sometimes 10 minutes . Thermalpads and paste changed.
The one gets after 15 seconds in furmark 720p a orange screen and pc reboots and the other gets a grey screen in furmark.
Updated the bios and the drivers but didnt help
PSU is good, and pcb looks good also. What can be the problem? (No artifacts)
When i get blackscreen in windows the PC doesnt restart
You must have never seen Gainward video cards. 😂🤣😅😄 <-- Don't know why they followed me here. Keep 'em busy, while i try to slip out the back door. Thanks.
ОтветитьI have vega56 that doesnt work. When bootin up the pc, the card powers up aggressively spinning fans for a while then it just lights up but doesnt show up or give any video. Any ideas what might be wrong? Is it possible to ship oversees for you to look at?
ОтветитьI just replaced my thermal pads. Was very careful to make sure everything was perfect. Powered it on. Got artifacting and dead gpu. Nothing looks messed up so no idea what happened. Paste and pad contact was perfect. I guess just bad luck.
Ответитьthat's crazy how did you accumulated so much knowledge to start with
ОтветитьAMD cards have a really big gap between GPU Core and Hotspot, it's not always something wrong.
Then i am here, pissing myself because my hotspot is 10°c higher than the core..
And i remember, the 5700 XT XFX cards run like garbage because of all the plastic used, i'd go so far saying removing the plastic shrouds would result in better temps.
I'm still on your channel been binge-watching... this is like soothing for me
ОтветитьI really like your videos, not only you are a top-notch technician but you are also a nice person, at least that's the feeling I get from you.
ОтветитьAfter viewing quite a few of your vids, I never get tired of watching real pros (like you, KrisFix.Germany, etc.) doing real pro work. Besides the electrical knowledge, the dexterity is astounding. Flipping a couple old jokes, in your case it actually is rocket science AND brain surgery! Expertly done good sir, expertly done!
ОтветитьNice video
Ответитьmoreeee
ОтветитьLove your channel!
ОтветитьI Have a problem but idk what is the cause of it..When i turn my pc on the monitor turns off After passing the bios (in the windows logo)..till i unplug and plug it ..i just got the RX 5700 SAPPHIRE and it is probably the problem idk.. (Everything else works fine) ..Pls HELP
ОтветитьI've got a question.. I've always been an EVGA fan as far as build hardware goes.. I certainly have a EVGA 2080 Ti XC Ultra 2 that I bought new back in early 2020 when I built my rig and it's been a fantastic card.. Come next year I'm thinking of building a new updated rig with the latest and greatest.. Now that EVGA is no longer making NVIDIA GPU's, what manufacture would you recommend? Who uses the best components?
ОтветитьWhat GPU would you recommend because I'm in dead end. A 4070 ti or 7900 xt and what brand to choose. Your opinion will matter the most
Ответить:Thumbs UP:
Ответить