5 More Things To Know Before Buying/Building An AR-15

I'm in a very fortunate situation also, I have a 100 acre creekside property that I can go shoot anything any time.

For home defense where your shots will be within 20 yds, I like a 20 gauge pump with double aught buck either in 2 and 3/4 or 3inch shells.

Optics: Don't forget about your age and vision issues. Purchased an LPVO instead of a 3x or 5x magnifier and a red dot

I have a number if lowers never opened!
Any suggestions on a new build?
Am thinking I would like super light super simple reliable as can get!
Please suggestions

I've got an Aero build that's got 2300 into it so far my lower has all Geissele internals and my upper is all Faxon internals

Guys, circle the wagons . get to the point

I lived in Charlotte for six years my wife had my second child there and we absolutely loved it I moved back home to the Fayetteville Fort Bragg area should have stayed in Charlotte

🏴‍☠

Can you please give me your input on this. I tried to get reviews, but with no luck, and this ar15 S&W mp sport2 is going to be first ar15

Handguard
Us Made
Proprietary Barrel Nut Included
M-Lok System Slides Over Barrel Nut, And Is Locked Up Against Receiver With 6 Screws
Internal Diameter: 1.34
T6 Aluminum Body
Total Weight Including Barrel Nut Is 10.8 Oz
Tight Fit Up Against Receiver, Which Allows For A Monolithic Top
15″ Extended Length
Ultra Light Weight
M-Lok System
Heavy Duty
Chrome Finish
Stock
Just Released
High Density Polymer
Matte Black Finish
Chrome Finish on Buffer Tube
New Minimalist Design
Lightweight 5.56 Caliber Version Accepts QD Sling Swivel On Left Or Right Side
Total Weight Of Stock Kit: 15.2 Oz
Micro Stock Design With Short Buttplate
Complete With Chrome Buffer Tube, End Plate, Castle Nut, 3 Oz Car Buffer, & Chrome Recoil Spring
Weight Of Stock Shell: 5.4 Oz
Pistol Grip
Ultra Light Series
Skeletonized Cut Out Design
Ergonomic Finger Grooves
Perfect Width Enhances Trigger Pull
Weight: 3.6 Oz
Chrome Finish

I bought a S&W M&P Sport II in 2016 for $699, put a carry handle/rear sight on it, put a sling on it, got a dozen 40 round P-Mags, 1000 rounds of ammo, total cost, about $1200. I got my training in the military back in the late '70s/early '80s, and I go shooting out in the AZ desert. Don't need no range where I live. I'm about to buy a new H&R M16A1 replica AR-15. It doesn't need anything other than maybe a sling. Oh, and if you live where it's legal, get some 40 round magazines.

What happened to alek

Plus the AR is supposed to be fixed like a dog 😂

New york no rapid fire at the range its wack . Not even worth shooting unless your sighting in an optic. I pretty much only shoot pistols at the indoor range

How would I know that I have the proper headspace? Or how would I know that it’s sit correctly

That other guy is not ready for the internet

1. They make AKs 😏
That’s all folks….

I missed your TV wife .

lol gun channels are the best

just buy an aero for 1K and have no regrets

Adderall amirite

Have multiple mags pre-loaded with identifiable ammo. Some green tip, some 70-ish grain... OTM 77gr or similar. Maybe a mag or two of 55gr ball. Kinda hard to have too many pre-loaded mags.

If you live in Chicago... leave.

Treat uppers as complete units. Check headspacing - or have it checked, and keep BCG's matched up with uppers. The more 'complete' the uppers are, the faster you can change between them, and in theory, you have more spares if needed. It's no fun to do a quick upper change only to remember afterward that you borrowed the charging handle for that other build.

Now all a person needs is a place to shoot

Does the ACOG on that setup co witness with the fixed front sight and how does that work out with magnification? I was using a riser to get over the fixed front sight so that I could see the BDC clearly. The riser is less than ideal for cheek weld though. In the end, I switched to a Leupold Freedom RDS to eliminate the issue.

a range close to me with a gunshop and amazing pork bbq restaraunt attached all together burnt down recently and they havent built the range back sadly. Place was heaven going to shoot, brows some guns, then get an amazing dinner all at the same place. Restaraunt and gunstore still open though. Im guessing someone used green tip as it was an indoor range.

I seriously can not justify spending thousands on a mill spec weapon that i can build forless than a thousand and it functions just as well..

You should take a look at some Fortis uppers and lowers for us not to many guys look at their stuff

Mine is essentially an all Aero precision build. Aero lower, BCG, FCG, lower kit, not sure who made the upper/barrel shroud as it came together. Ballistic advantage barrel (technically aero precision as well). 800 bucks. Then a little under 400 for my sig tango Msr 1-6. Made my own sling from paracord and some wally world swivel clips for about 10 bucks total

"I didn't lose anything in a boating accident. Go screw yourself." -Clint
Excellent apparel idea

Is Kaya a full-time employee now?

A think a 3x flip up magnifier is the perfect set up with a red dot up front on ARs and AKs just my perfect setup for me in my oppinion. It's good to have that Xtra magnification if needed even for identifying targets.

Would love to see some reviews and collabs with zaviar firearms. They seem to have some affordable cool products

1. Know your gun and limitations
2. Invest in ammo and training

Clint’s got the trex arms special acog setup

Credova sucks ass. You end up paying almost double the price of the original item if you don't pay it off early. And if you do pay it off early, you'll still pay a fair amount over the original price.

Great video! necessary information for new builders but….. shhhh your selling guns and parts don’t share too much common sense.

Love the little jabs at the ATF I also never lost anything in a boating accident never been in a boating accident so be men train know your equipment and don't give up a single right God given or just simply being born in this country no one has the ability to tell you how you can defend yourself or with what you are allowed to use to defend yourself with not just in this country but any country fight for your life liberty and pursuit of happiness don't give an inch because they will take a mile

1. Buy as many as you can because the government doesn’t want you to own them.
2. Train

Saying "plexiglass" is like saying "wood". Balsa and oak are very different. There are easily 100 different grades of acrylic (Plexiglass) and another hundred grades of polycarbonate (Lexan). And they all look and feel alike, but can have a hundred-fold difference in resistance to bullets.

Surprised you didn't mention that headspacing affects accuracy.

If you buy "extra" parts they "somehow" turn into more AR-15 rifles.

Which end goes toward the target?

I keep Speer gold dot and federal fusion bonded soft points in my ar15s for home defense!

Man I love that setup, sweet ass gun, got that new Surefire on there already! I haven’t even seen them available til the other day midwayusa finally had them in

Just wondering I been really looking into a affordable yet not too "cheap" Ar15 an came across Black Rain Ordnance fission "bro 15" wondering how you guys rate this AR. For me it's between the Sig Sauer M400 Snakebite just don't like it doesn't have picatinny rail at end of Mloc barrel. The Black Rain Fission Does so just wanted your guys input on it to help me decide. There both at a perfect price range at today's market and being available at a gunshop close to my house.

Clint & Kaya
or is it
Kaya & Clint?

Stuck 556 case. Keep 1/8 inch stainless steel welding rod for TIG welding in your case. Should your case stick in the chamber you slide the rod down the barrel and tap it it'll knock the case. Or use a cleaning rod