Samsung LCD TV Repair - TV Won't Turn On - How to Replace Power Supply & Main Board

Samsung LCD TV Repair - TV Won't Turn On - How to Replace Power Supply & Main Board

ShopJimmy

10 лет назад

468,180 Просмотров

Ссылки и html тэги не поддерживаются


Комментарии:

Movies Z Tamil
Movies Z Tamil - 01.05.2021 14:27

I literally didn’t understand anything 😂😂😅

Ответить
Erni760803
Erni760803 - 17.01.2021 17:21

MANY THANKS ... this video helped me to fix my Samsung TV :)

Ответить
Syed Hasan Ziaya
Syed Hasan Ziaya - 16.01.2021 12:30

Hi, What do you suggest for the following problem I am facing:
I have the powerboard BN4400932B of a Samsung TV, which says the Standby power to be 11.8V.
I disconnected the board off TV and checked the Standby power to be ok I.e. about 11V, when I connect the board on the TV the Standby power drops to 4.5V.
What could be the reason?

Ответить
CryptX
CryptX - 17.11.2020 12:15

My samsung tv lived 15 years and only it's display gone but it's sound is audible and everything is ok but only display gone

Ответить
Will
Will - 05.11.2020 06:14

Wow! Dumbest group yet.

Ответить
31syco
31syco - 16.10.2020 20:04

Samsung TVs suck ass

Ответить
Choco Latte
Choco Latte - 07.09.2020 04:53

Does anyone know where i can find a mpc76, 0.08 ohms, 209 v and a mpc73, 0.08 ohms, fu316f ? I cant find them anywhere online

Ответить
SHIRISH PATEL
SHIRISH PATEL - 30.07.2020 19:10

I have 46 " Samsung TV LN46C530F1F. Stand by light blink 5 times & then nothing happen , I left it as is & then after a long time 12 hours TV started itself, I can watch functioning normally but as soon as I power off & re-start it won't start, red light blink 5 times & nothing happen. I replaced power board but same thing. Any body know what is the real problem with my TV... Thanks

Ответить
Gamini Fernando
Gamini Fernando - 30.11.2019 10:03

My 27 inch samsung lcd tv has a LCD Panel board problem.(not T.O.C Board) its 2A fuse was burnt. so i checked and found the power 12v going to the board is showing dead short after the fuse..where do i start looking for the problem of this short, The Tv
is working with sound but no display...please help!

Ответить
A B
A B - 10.11.2019 05:49

All these Chinese and Korean made TV's are Disposable. They break down after the warranty expires, that is why they are cheap to buy. NOT made to last.

Ответить
lanorris43
lanorris43 - 26.07.2019 05:22

I have Samsung UN75UN8000FXZA won't turn on, we had a power surge a couple weeks ago and I thing it may have damage the TV, is it any way I can fix it? or even get the parts to fix it? Please help

Ответить
Ibrahim Koyuncu
Ibrahim Koyuncu - 07.07.2019 04:13

instead of 13v i got 9v is that normal ?

Ответить
Ser
Ser - 10.04.2019 04:22

Sony rear projector CRT TV worked for 20 years straight until something burned out and the image got blurry. Two Samsung HDTVs barely worked for 5 years until it needed a motherboard replacement.

Ответить
Bill Hood
Bill Hood - 05.01.2019 01:35

While watching my (2014?) Samsung Smart TV, there was a loud "pop" and then it died. Any idea what might have caused this and if so, is it easily repaired? Thanks!

Ответить
T Perk
T Perk - 27.09.2018 14:39

Test

Ответить
thegodfather Furat
thegodfather Furat - 23.08.2018 04:32

Do you can increase the rate of responding to feel free to 144 Hertz

Ответить
Arun Naik
Arun Naik - 20.08.2018 19:25

Can u make video on LCD TV not turning on due to high voltage

Ответить
Ivory Raven
Ivory Raven - 04.06.2018 01:37

Hmm so this test didn't work on mine. Mine has position 4 is on/off 3.3v position 8 is power on 3.3v. I tried on/off to ground since I'm getting volts and no bingo.

Ответить
Rb26
Rb26 - 22.01.2018 05:41

Jesus we have to do all this to change a power supply

Ответить
Drick Lorenz
Drick Lorenz - 22.12.2017 19:27

unwatchable with that friggin bass thumping the whole time

Ответить
Denesh kumaar
Denesh kumaar - 10.11.2017 15:46

I have a samsung Plasma TV 43 S43SD-YB03. No image display . If on and off the RED led light can be appear. all change the power supply board but still cant be used. Besides that, power supply board voltage imbalance by dropping and a few second later voltage became stable at VS and VA. The T con board led is blinking green light. May I know what is the actual reasons why this tv can be play and how to repair it? Kindly help us . Thank you .

Ответить
james sooknanan
james sooknanan - 20.10.2017 01:29

hi guys, I have a vizio va19l HDT When I plug the set in and the orange vizio light comes on.If I push the power button,the vizio light turns white, but no baclight or audio. Can you help me fix this TV. Thanks. James

Ответить
Jason BiggSimm Simmons
Jason BiggSimm Simmons - 15.10.2017 00:40

The title says how to replace Power Supply not how to Troubleshoot power supply. Maybe you should edit the title.

Ответить
isaac mukuna
isaac mukuna - 08.09.2017 11:18

hi Jimmy
its Isaac all the way from South Africa. I have a Samsung BN44-00664C power supply.
Do you perhaps have a circuit diagram to help me troubleshoot the power supply...Because here
we do not have people supplying spare PCB such as this one

Ответить
Nic Parker
Nic Parker - 29.08.2017 00:06

you are a fucking idiot

Ответить
The Humphreys
The Humphreys - 23.08.2017 09:16

What do you mean by voltages missing? I was supposed to have three 12+ volt leads on the wide ribbon, but only had two wires in that part of the schematic, going from the power supply to the main. Everything else checked out fine, just seemed to be one wire missing from the connector. Is that what you're talking about, or just something not reading what it's supposed to?

Ответить
motivation 07
motivation 07 - 16.08.2017 16:00

Hi I have Questions is videocon lcd TV 42 inch red light on but on display WY sir

Ответить
Hasrat Ashrafi
Hasrat Ashrafi - 17.07.2017 13:16

Hello I have samsung lcd LA26R71BA in this lcd led blink and display appear and after few seconds is off what is the problem

Ответить
Calvin Mudumela
Calvin Mudumela - 03.07.2017 21:49

full. tv.repaire videos i will. pay. thanks0

Ответить
Calvin Mudumela
Calvin Mudumela - 03.07.2017 21:47

please sendn more videos on you tube

Ответить
AVSystemParts
AVSystemParts - 18.06.2017 22:18

++++

Ответить
Angel hernandez
Angel hernandez - 18.06.2017 00:02

hey whats your gmail trying to see if i can send you a picture of my tv to see whats wrong with it

Ответить
kasaram sudhakar
kasaram sudhakar - 22.04.2017 21:26

42" videocon LCD TVwith Model No: LCD TV SL 42 FBM-FLA is in dead condition,found that SMPS is not working .I dont have ckt diagram.can you help me in this regard...
Thanking you sudhakar

Ответить
thenickbig
thenickbig - 28.02.2017 09:03

Hello friend, I have a LE32A457 Samsung LCD TV and the power led is on and I have 5.2v on the stby pin, but when I jump the power on/off with the stby pins the TV don't boot. What do you think is the problem? Tanks for your time. Congrats on your videos, they are very nice!

Ответить
David Hodges
David Hodges - 25.02.2017 16:22

I HAVE A SAMSUNG PS50B450 AND I DONT HAVE A BLINKING LIGHT ON MY LOGIC BOARD BUT STANDBY LIGHT COMES ON WITH NO PICTURE ANY IDEAR WHAT IT IS PLEASE

Ответить
Inequity-
Inequity- - 03.02.2017 01:14

I have the same tv in the video. the tv wasn't showing any image i changed the backlight inverter and it still doesnt work what should i do

Ответить
Samuel Owens
Samuel Owens - 28.01.2017 23:05

Thanks that was very informative, but all of my capacitors all seem to be good. A TV repairman told me that my motherboard was bad. How much are motherboards?

Ответить
mark celestial
mark celestial - 22.12.2016 18:40

i have a question jimmy regarding my samsung led UN32J4300 32inc. 2015mdel. Why won't it turn on? I tried unplugging then plugging it again many times but it still doesn't work. tnx ihope u respnse. godbless

Ответить
RapidTraveler
RapidTraveler - 21.12.2016 19:58

does the power supply say 100-240 volts, I heard tvs can support dual voltage but they indicate only one voltage on the outside for each specific country even though they can work anywhere eg N.America and England, just like computers

Ответить
xRoshi
xRoshi - 21.11.2016 05:45

hi i think i may have the same tv its a ln40a500t1f. the tv when i plug it in and press the on button it makes a continuous beep and the screen stays off. im going nut try to fix it

Ответить
Bailey B
Bailey B - 20.11.2016 04:50

I have a Samsung tv un39fh5000fxza, I replace the main board and tcon board and also main audio board. Any other thought on what to do or place ?

Ответить
Ali Ali
Ali Ali - 01.10.2016 21:05

ecron noir tv condor 55cm led

Ответить
Vikas Pathak
Vikas Pathak - 25.08.2016 20:20

Hello, I have a samsung UE40ES7005UXXE TV. Screen has a problem. It just stops with stripes on screen. Sometimes it does not start. Please suggest remedy.

Ответить
Teefa Elgamal
Teefa Elgamal - 18.08.2016 00:04

انا عندي تليفزيون صوني شاشه بيضاء فقط

Ответить
Jose Ramirez
Jose Ramirez - 30.06.2016 00:06

I was gonna ask a question, but then I read your disclaimer...sucks cuz I think its the power supply

Ответить
Sabin Maharjan
Sabin Maharjan - 20.06.2016 11:59

hi have a Samsung LED TV model no UA32D4000N won't turn on, Blinking Red light only. Any Solution please

Ответить
Miguel Sanchez
Miguel Sanchez - 14.06.2016 19:44

Hello, I have power supply board DPS 138 BP power supply board and i found 4 small transformers with a lot of turns. Are they high voltage for CCFL or something other?????? And if they are high voltage how to turn them on. There is a lot of pins and I need high voltage. Thanks.

Ответить