The Quickest & Safest Way to Clean an Engine Bay! (GUARANTEED)

Online everything is perfect bolts getting no problems and so on. And then you are working 2 days to do a 20 minute job...😂❤ We all been there...

What type of water did u use?

It’s only the top layer of the engine compartment. I was hoping to see how the electrical connections and the alternator were prepared for the spray !!

I love my tornador but my steam cleaner does a better job cleaning my engine bay

once you've blasted it with your gizmo try a leaf blower to finish. No wiping. I do my Harley with S100, water rinse, leaf blower and turns out great in a fraction of the time

Doing research on cleaning my own after some work to the engine. Cleaning removed components before reassembly and brush cleaning whatever I can reach... Your method looks promising for going over everything once my car is back together. Lots of Volvo c30 bits in video car. Nice job!

This is just a dust removal video. Show us how to remove greasy engine and transmition, not plastic covers..

the engine part is never washed, if it is greasy, it means that you should go to a car mechanic and not wash it

Elbow grease still the best
on the market & less than
a fraction of the price 🥴👍🏻

Brilliant approach in cleaning a car's engine bay. I hope we have those tools here in Canada. More success to your channel. :)

Great video, thank you so much 💜 what do you use the Tornador with, water + APC or some other stuff?

Use wd40 and a cloth job done

I'm sure you said it somewhere, but I couldn't find where you say what you put in the bottle of the Tornador Classic. What liquid did you put in it?

Reason why i never clean my engine bay.
1. It will attrack rat. And they live in your car because of the moist.
2. Not good for the wiring in the engine bay.. wire fet damage when expose to water and then heat. . Who care if your engine bay is dirty. I just use air blower to remove dust.

great alternatives??? Koch chemie apc, spraybottle and the motorplast .... I love your challel, Dave

Cleaning your engine now. Rat infested later. Rat will live in you engine bay. Your welcome

Is that your natural voice tone?

I’m still afraid throwing all that pressured aerosol onto the connectors.

can you show us again on an engine bay thats dirtier please .

Here is the real quickest way: Spray with an aerosol can wheel or engine cleaner- rinse with low pressure garden hose. Apply a second time and brush any thick grime. No expensive equipment needed.

How long do you get while using tornado gun before air pressure isnt powerful enough.

very important to spray generously on sensor connections and cables, if its posible , spray also the DME directly or the housing at least

Great video of a great product. What does the inverted Ford logo stand for???

🍻👏👏👏

If you have an open air intake , stuff it with a microfiber towel .

20+ years for the most part this is how I clean all my rides. LOL then i hit with a quick detailer.

How do you find the size of the compressor re air volume versus using the Tornador for long periods of time? Do you find the compressor is constantly trying to keep up as it is relatively small compared to what the recommended size is? 👍🏼👍🏼👍🏼

Wouldn't some citris-based cleaner on a cloth take off that lithium grease? It usually works for me and no danger of scratching the plastic (or metal). Also, I usually use the blue scotchbrite sponges because they will not scratch metal and usually won't scratch plastic either. In fact, I only use the green scotchbrite when I WANT to scratch the surface.

Fab video Dave. Haven't got an air compressor so could you do video with blowing through a straw for the budget minded? 😂 ❤

I pressure wash my engine bay. As long as you're not right up to it on the wiring etc or driving a tesla or something I've never had an issue. Ppl so scared lol

Possibly use a Scrub Buddy (available from Home Bargains) for the stubborn areas? Unlike the normal scrub pads, they will not scratch. Great video and thanks for sharing.

What did you use in the bottle? An APC?

Did some mention the word EPIC ?

Very effective and time saving. Gets most if not all the surface cleaned.

Never failed me to this day and I’m running tornado black.

Ima keep it simple. Your a mad scientist 😎Keep up the work champ! I admire those that think outside the box!

Hi video vary interesting.
I was just wondering what standard car polish have used ?as I'm thinking about trying a different one I can only polish by hand as not used a polisher looking at hand polish iv used sonax perfect finish good polish
Cheers 👍👍
Stewart

Great video I have always cleaned around the Bonnet boot and doors on all the cars I have owned including the jambs

I've not properly cleaned my engine bay, I'm abit scared to to be honest 😂 I wipe over with some APC on the rocker cover 😂

Bought a used tornado gun. But found out that my compressor is a bit small. Would love to have a bigger one. Love to try a engine bay cleaning with it

My engine bay would need a pressure washer, that thing isnt enough lol

Works for me 👍

This has turned up at a good time, my partner's car's EB is a mare to clean. Also my preferred black plastic product is now NLA and others I've tried, wash off all to easy and leave streaks. Neither of us have the time or mobility to fiddle about going over the same ground. Our local petrol station "valeters" are shockers too. Thanks for sharing 👍😊✌️💜

i absolutely love your videos haha... i mean, you might have heard of the company i work for if you're from the UK, we're called "svs" (specialist valeting services).... now don't get me wrong, we are more like an agency, so i can't say every valeter is amazing... but we do have some good lads, how ever... my point here... i work for a valeting company and i take a lot of pride in my work, for example, the autoglym van turned up on site the other day, i spent 600 quid and didnt even get chemicals, it was literally just getting new brushes and clothes etc (my tools) again.

but as a valeter, you know one thing i really do hate and i hate it with a passion... polishing cars -.-

Really good and quick way of cleaning your engine bay. Great episode:)

In wich conzentration u used your produkts ?

Wonder is the cheaper ones do the same job at £100 less of the price

Good thing choosing an older car fo these experiments 😅. Glad it worked out, now Tornador site is mostly out of stock...

Love that, cracking job. I have to ask though, what's the combined cost of an air compressor and the Tornador? Thanks for your content 🙏

Great video Dave I love the satisfaction of before and after especially a dirty engine bay. Would love to see a video on cleaning Alcantara. Any recommendations on removing small stains?

Sandro from Car Craft Auto Detailing on YT has been doing this method for year's and it WORKS.