Don't Throw Out a Cheap Intex or Bestway Flowclear Pool Filter Pump! Also Saluspa Impeller Fix

Thank you! Exactly what I needed

Hiya Jason: Hoping you could answer my question - we have only recently put our 10ft pool up with one of these filter pumps and within a week of the pool being up, the filter just wont seem to work, have tried most things like releasing the air and water inside the pump. Would taking it apart and having a look inside help?? Surely the filter cant be stuffed after only a weeks usage. Any advice to help would be great as i just cant figure out how its gone from working one minute to all of a sudden nothing??? Thanx in advance 😊
Edit: problem has been resolved (hopefully) found why the motor wouldnt turn was because of a little black knob at the top of the shaft of the pump mechanism which connects to the suction seal. when i took it off the motor worked straight away but if i put it back on its like it jammed it up so ive left it off and so far (fingers crossed) pump is working fine. Thanx to your tutorial though i would never have known how to pull apart and put back together the pump - BIG Thank you 🙏

Thanks so much Jason, could you please let me know the size of the washers to buy? We don't have them locally so will need to order online. Thanks in advance!

Can anyone tell me how to bypass the timer on this pump?

Thank you for your video

The last words you stated was exactly what mine did "get hot and burn out". That should be the name of this product cheap junk.

GOOD INFO. LOL, WHEN YOU TOOK IT APART LOOKED JUST LIKE MY BIG FISH PUMPS ALL THE PARTS INSIDE.

The shaft in my filter was plastic and broke when i was cleaning it .. what can i do 😢

This was exactly what I needed bc I was about to throw mine away! Lol now it's pumping better for sure and has a lot more water pressure going back into the pool! Any tips on how to keep it from leaking though? Idk what I'm doing wrong but water always seems to leak from around the top of pump no matter how tight the lid and/or air valve thing are.

Thanks it works and i hope more than two month now its steanless 👍

Yo my problem is that my pump is not pumping a lot of water

Hi I know this video is almost a year old but if you can really help me my filter is brand new I just bought the pool hasn’t been up not even a month and the filter is not turning on at all please help it was but now it just doesn’t do anything when plugged in

Mine still not working. I have a pump that is designed just like yours. The light comes on when I test it and everything but the pump do not turn or make any type of noise. I’ve tried different outlets and nothing seems to work. I’ve watched different videos I tried putting wd40 in it and nothing 😭

I have one similar to that one but the chamber for the filter is by itself bit motor is by itself me and my mom have been trying to make it work but it has no pressure it doesn't suck anyone help me out? The motor is the same one in the video

These pumps are toys they come with the pool easy fix upgrade to a $300 to $500 I had this one and you gave to clean it almost everyday

I put them in the dishwasher.

voila! great video 10/4 😎

How do I get the air out of the line

Really good video thanks for doing the video helped us out a lot

Hi thanks for the info. I ended up having to buy a new one no power, but now ik how to take care of it. Appreciate you

Anyone know if you can get a replacement impeller for this pump? I can’t find one that looks identical.

My Coleman Power Steel aboveground pool came with the flow clear pump, it's transparent so I can not only see the condition of the filter (clean, dirt), but also the amount of water flowing through the pump. So, yes, the pump makes same noises, but when you can actually 'see!' what's going on, you're, well, I am at ease. I can truly say, if I couldn't and just heard all that clattering, I would be wondering what is going on. As in my neighbour's hvac system is loud then gets louder then makes all these sounds and I wonder what is going on, is it ok, is it going to explode. Beeb doing it for years, so, guess what I'm sayin is, I like my transparent pump, but I cannot find another one. The hoses are cracking and I put flex tape around cracks. I can't find replacement hoses.

Plug all 3 holes. Take one of the outtake stoppers out. Let the water begin to fill. Open the air release valve on the top of the pump until water runs with no air pockets. Shut the valve on the top of the pump. Take out the remaining 2 stoppers. Then hit reset to let the pump begin. Make sure you tighten all connections. If you see bubbles, hit "test" to stop the pump. Then, unscrew the air valve on top of the pump again until it runs clear with no air pockets. Then, hit reset button.

Yo! Coming from a vacuum technician, the best way to wash pleated filters is to soak them in a dilution of “Dawn heavy duty degreaser” (the purple degreaser chemical AT LOWES, NOT the dish soap). Then rinse with water, then water and white vinegar dilution (removes degreaser residue), then water again (removes vinegar residue). Other chemicals clog the pores of the filter media, eat at the fibers, and/or fray the fibers.

the noise is because you have bubbles in it ,release the top valve before you turn it on (until water rises to the top and start spilling) than close it ,now turn pump on ,there should not be any noise exept the water flow from the hoses ,all you need to do it to make sure there are no air in the hoses or the pump ,that is all

Just disasembling that wobly pump made it work back again... I had to sand the selenoid a little bit cause yeah mine is in plastic, even the shaft of the pump is in plastic 🙃. TY. (the shaft is in ceramic.) make sure the pump pumps water with a good flow cause if your filter is dirty the shaft will warp and snap.

My pump seem to not be pulling in water, I can hear the water run out if I lift the pipe but it's not pushing water out on it's own

My pump isn't making any noise at all and has stopped working 😕

THANK YOU SIR! just fixed our pump, it made more noise than usual and i figured i would take it apart to see what was going on, also i have two solar mats and they didn't heat the pool anymore due to lack of pressure. I just needed a quick tutorial on how to disassemble the pump, did that and found that there was a tiny part that came loose at the bottom of the axle, put it back together and presto it works like new.

What is the diameter of the hoses? I want to connect a skimmer but I can't connect the skimmer to the inlet

Mine turns off after a Few minutes on. The motor is very hot when it turns off so I’m guessing it’s overheating so it turns off for safety. Might be time to buy a new pump?

what type of filter uses this pump?

Yes, I reset my GFCI. I disconnected the hoses last night and dried everything. I could not get the bottom screws to loosen without stripping them so I left them alone. Instead, I plugged it in dry and it was spinning (motor on). Instead of using 2 drain to filter hoses, I used only 1 since my pool is small, and of course used the hose that connects back to the pool after filtering. That seems to have done the trick. I believe having 3 hoses was overload. Not sure but for now it's working. Thanks again.

I meant to say my "Pump" doesn't make any noise whatsoever and doesn't seem to be pulling water. What should I do?

My Filter doesn't make any noise whatsoever and doesn't seem to be pulling water. What should I do?

How many times did you say the word THIS in the beginning of the video? LOL

Do they not come with skimmers anymore?

This pump came with my pool and it was absolutely horrible. I ended up upgrading to a 2500 gph pump which was twice and a half as much ghp as this one since this is one is only 1000gph. Now this pump I had left over so I ended up using it as a fountain to keep my pool cool during the summer.

Last summer I got my pool. Pump went out less then 2 weeks later. Finally got it replaced and same thing happened. So I gave up for the summer and upgraded this summer. It was absolutely frustrating

Good job thanks

Hiya Jason, I use the same pump on my fish pond with a skimmer & wish to give you my tips if I may. Firstly the skimmer has socks inside the basket so I do not use filters inside the pump. Secondly, my spindle which went through the impeller was made of plastic & snapped in 2. I got an empty biro pen insert & cut a length the same as the broken one, put a toothpick inside the biro to add some rigidity & put it back together. It works like a dream.

Exactly the advice I needed. Very well done...thank you !! 👏 🙂

Mine stops working about every 2nd time I go to turn it on. BUT, I just UNPLUG FIRST, plug the in/out take holes, open pump, dump out the water, close it back up...and it starts every time after doing that. Your fix might be longer lasting... but for those who don't feel confident to take the pump apart... it is just another suggestion. These pumps are cheap but not pricewise!

Im gonna try this tonight on mine, the noise is unbearable. Man I really hope it works! Thanks

I have a new one and it barely suctions

I have a similar pool but this one uses the large long pump that goes on the side and screw seals to the pool and hangs. I wonder if someone out there that is good with 3D printing could make a better impeller design that would work better. I've seen people modify the pump I have and run the upgraded sand filter in line after the pump. I can see stuff float past the Inlet so it just seems like it needs better suction which a better impeller design may solve it. Just a thought for those with 3D printers maybe worth a shot for cheaper DIY fix than $300 bucks on the sand pump upgrade most people seem to do.

Is that bottom when you suction side

Is it waterproof? Can the pump stay outdoor during all weather conditions ? Or more importantly “rain”.

Thanks for the tutorial! I realized mine is missing the whole bottoms fan propellers. Guess I'll have buy a new one.

It's very easy and takes less than 5 minutes. I use only one filter for the whole season. Every week I take him out ones or twice and rinse him very good with my garden hose and reinstall him . Problem solved, and the year after buy and install a new one and have never run into a problem..