Комментарии:
Thank you, you made it easy !!
ОтветитьI just finished putting one together and your video helped me a bunch. Thankyou sir for taking the time to do this. 😊❤
ОтветитьThis video absolutely sucks! We can’t see what the heck you are doing! Why don’t you show the viewing audience which bolt/screw/washer/spacer you are using? Let us know what they are labeled as. Big fail!!!
ОтветитьThanks for this vide
ОтветитьThanks for your video instruction, I just bought one.
ОтветитьHello, greetings from Ecuador. Thanks for your video, it will work for a TCL 4k 50P735 2023 smartv. This support looks great. I hope it arrives in my country very soon.
ОтветитьLiving in a small 400 sq ft apartment and buying LG tv's with the feet at the ends of the tv this stand has been essential to avoid getting a larger cabinet to put the tv on. I also have children around that have tipped the tv while playing (I managed to catch it before it landed on them). This stand is much more stable than the tiny feet that come with most LG base model TV's
ОтветитьI have used this stand for two tv's until I could arrange for them to be wall mounted. It's important to check your bolt depth on the mount points. There is a diagram in the instructions about this. If you get it wrong, you pull the mount points off the case and can destroy any chance of mounting your tv on anything in the future. I have had no issues with NEMA hole alignment but saw one review that claimed it. It must have been a misinterpretation of the directions. Also, don't use this as a tv mount outside. Repeated heating and cooling cycles can stress the glass base and cause it to spontaneously shatter resulting in your tv falling face first and being destroyed (seen that happen not pretty). Also try not to grab the tv by the sides only it can stress and shatter the panel (I saw this happen to one person. the new $700 tv was scrap) One hand on the bottom and one hand on the side can be done but is not ideal. Ideally two people using the top and bottom grip is best.
ОтветитьThank you so much sir because I lost my instruction
ОтветитьFantastic video. This will be a great help when I assemble the stand this weekend. Thank you!!!
ОтветитьThanks for the video. In my little constrained world I was not even aware of the existence of these swivel TV stands until I saw one at a friend's home. Was just researching them online and will be getting a PERLESMITH this week. Maybe a simple setup for some but there are those of us out there who need the reassurance to try. Again thank you.
ОтветитьLeans forward. So dumb. Terrible design
ОтветитьGreat Video! thanx
ОтветитьThanks so much for this! I was only stuck on the very last step but you solved it immediately! I'll watch the rest later to make sure I did everything else right just in case ;)
ОтветитьI am not a fan of assembly but this stand is pretty slick. Useful and looks good.
Ответитьthank you!!!! 🖤
ОтветитьThank you! I have a different model but setting up the base was basically the same. I have a question about the tv brackets. They both have a whole row of holes. Does it matter which hole you put the screws into? At first the tv was way too high (6th to last holes) so I screwed the holes that were lower. (2nd to last holes). I’m sorry for the horrible description.
ОтветитьThankyou so much I was really happy with your video struggled with instruction manual however you made it really simple ❤
ОтветитьThank you very much for the video super helpful!
ОтветитьI have Tv TCL 43 in the middle of my room do you think is it suitable for this kind of TV specially its outputs is in the middle and tv will not falling and stand for along time do you think it is practical. I will buy one soon but iam confuse
ОтветитьYou did an amazing job on this video like I've been looking everywhere at every last video and yours is 💯💯💯💯💯💯
ОтветитьYou shouldn't lay your television flat on the ground.
ОтветитьThank you very much for a great video. How do you know what screws fit into the tv? Fred
ОтветитьThank you, very helpful!
ОтветитьI bought an odd vesa configuration. 100mm x 200mm so most stands don't work unless I start watching TV on my side. Lol. The stand you assembled just hooks over the stand once you have the vertical rods attached to the TV if I am understanding you?
ОтветитьYou made this seem easy and now I'm not afraid to try it on my own. I'm not good as assembly so I will keep your video on as I do my own! You walked through everything including the manual which I might not need to read too much as that will be more confusing! thanks so much!
ОтветитьDon't laugh it took me 4 hours to do this my tv is older a 55 Inch Sony and so heavy. Plus I was watching my other TV while I did this 🤣
ОтветитьThank you for this.
ОтветитьThank you for sharing. This video helped. If you have a Sony 43" I would like to share that the bolts that come with the stand don't fit your TV so you will have to go to hardware store and purchase correct size. Due to this, my hardware store had correct dimension but not correct length, so I had to buy longer bolts and use remainder smaller spacers as shims to shorten bolt length so to not drive bolt to far in. With my TV the bolt holes are resest so I had to insert large spacer into slot, large washer, bracket, smaller washer, another spacer (came with stand), washer so screw doesn't fall through. I'm only sharing because I'm not very mechanically inclined and spent an hour watching videos without getting my questions answered pertaining to my situation. Yours was the best by far. Thanks again.
ОтветитьThank you so much. This really helped me. I thought I got the wrong one. I was so confused. Thank you very much
ОтветитьYou explained/showed the final step of installing the two lock clips better than Perlesmith's own video!
ОтветитьGreat instructional video. Going to put mine together today
ОтветитьThanks. I could not figure out how the locking screws worked from the instructions. Your video cleared that up for me!
ОтветитьWhat kind of TV stand is that? Not the Perlesmith, your actual TV stand. I like it.
ОтветитьThanks for this, I watched a few other horrible videos on assembly. Even though I bought a different model, and had a different type of TV, this video was still better than the ones I watched for my specific model and TV. I thought the directions that came with the stand started off very clearly and easy to understand, but then took a nose dive. Especially on installing the safety clips, which is rather important. Thanks for doing what the company did not.
ОтветитьThank you! This is a great video. I followed you along and was able to put the Tv stand together. The company should pay you and put your video on their site.
ОтветитьHow much space is there between the front edge of the stand and the front of the TV? I would like to get a stand that doesn't have the TV sitting back too far. Thanks!
ОтветитьThank you
ОтветитьThank you so much for taking the time out and making a video. It helped me so much. Seemed a little intimidating with all the screws and such and realize that not all the screws are needed. So seeing you set it up, helped all those concerns for me. Appreciate it very much. And I subscribed and liked.
ОтветитьThank you sir you help me mount my tv I was having a hard time until I seen what you were doing
Ответитьwhat are the those rods called? I’m trying to find replacements. The things you put on the back of tv
ОтветитьThanks, just ordered one!
Ответить-excellent video. I was able to put mine together today. Very very helpful
Ответить似たようなのを買いましたよ
ありがとうございます(^-^)v
Wish I could do my LG myself but the top are super thin. Leaves nowhere to grip
ОтветитьHi, what is the size of this tv?
ОтветитьThat you for the how to video👍🏾
ОтветитьGREAT VIDEO! Putting Mine Together as I Watch You! THANKS!
ОтветитьThank you. I was an hour into trying to put the stand together when I decided to go to yt. Pull up your video. Was finished in 15 minutes. I'm gonna try doing the other later
This time no weed.