Комментарии:
Think good for bigger than 2 inch pipes and you are in an emergency, and cannot wait for coupling.
ОтветитьLol
ОтветитьNot good idea....just for number of watching
Ответить😂😂😂😂😂😂😂
ОтветитьFlow will be restricted and definitely results in pressure drop.
ОтветитьThis coin will collect dirt
ОтветитьThe better technique is to strap it from the outside instead of the inside.
ОтветитьNot suitable for leakage
ОтветитьDu cerebro es completo .
ОтветитьThe plumber wont tell you that trick because its going to leak like hell.
Ответитьworst
ОтветитьNot clever at all!
Ответитьwill restrict the flow of what ever is passing thru the pipe. this why a plumber will never tell u to do this. use a proper coupling
ОтветитьNot suitable for high pressure water sources, there is a risk of water leaking right at the cut, but it is also a good idea for constructing drainage pipes.
ОтветитьWhat if i need to connect a 3/4" air conditioning drain pipe that has cracked off a few inches at the end.The pipe measures around 3.5". Should i use a clamp? I'm having trouble finding a pipe with the same thickness, etc. I wish I could add a picture but don't know how or if you can.
Ответитьfirst method was the correct way to form a joint, this 'method' is just going to cause problems
ОтветитьSuper excellent
Ответитьill choose 1st 😘😘😘
ОтветитьNice video ok
ОтветитьLooking good but not suitable for high pressure.. the first method is better for high pressure water flow and more durable even if it doesn't look attractive
ОтветитьJust buy a coupling
ОтветитьNe faites jamais ça
Mauvais écoulement
All I'm gonna say is that if i was quoting plumbing work for a client and saw this, that quote just doubled
ОтветитьFor water ! No i dont think so
ОтветитьStupid design. You made it more complicated
ОтветитьThere is a reason why couplers are designed on the outside of the pipe and not the inside of the pipe.
So what you did was compromise the whole system doing it that way
This is insane. Who would feel good putting that behind their drywall? There are factory couplings for that that do not impede water by that cocamanie connection. 🤣
ОтветитьSi hubieses calentado bien el primer tubo ,entra.
ОтветитьThis method reduces internal diameter, instead of putting small size pipe peace inside use bigger size pipe from outside to keep internal diameter same all the time, which is responsible for good water flow.
Ответитьpelit amat lu tong, beli sambungan cuma 3 ribu..
Ответитьbikin sumbat
ОтветитьVery good idea & a very good video!. Thasnk you
ОтветитьThis way (second way)to conect is 100%wrong.cause of inner pipe should be surface and without jug.
First way was corect.
Poor and illegal. NOT code approved.
Ответитьراك خاطء كل الاوساخ تتراكم في داخل الانبوب بسبب ما فعلته وهي الاولى اصح
ОтветитьThank you!
ОтветитьThis may work if you don't need enough pressure. If this don't come off soon enough in boosted PSI from a water pump, the friction created will just reduce the desired PSI.
ОтветитьWhy use a coupling when you can so easily waste time doing this.. 🤦🏻♂️
ОтветитьFirst method is best
Ответить👏👏👏
ОтветитьThe plumber won't tell you if he's a good plumber. This is horrible advice. 😢Sorry.
Ответить🤣🤣🤣🤣
ОтветитьWHAT
Ответитьluffy holy shit
ОтветитьThanks this video cured my hiv aids
ОтветитьCoupling 10 rps ki hi to ati hai wo lagalena tha itna time pass kyu
ОтветитьHow to install a smelly sink.
Jokes aside though, this might work for wiring but put any kind of wastewater through it
這個方法承受的了水壓測試嗎?
Ответить🤦👎👎👎👎👎
ОтветитьYou only need “inside pipe connector” worth like $5.
Ответить