Detailed Jasper and Falcon Xbox 360 RGH3 tutorial guide for 2022! RGH 3 instant boots!

There are alternative points on the back of the motherboard you can solder to to make the top side look absolutely untouched. Did two falcons and they boot instantly.

Can you please do a rgh3 4gb Corona with out the post fix

Are you soldring any chip to xbox 360 phat motherbord? 😮

people still do this 😅

Hi pls help!
I have a zephyr one and when I want to create Xebuild it always says Wrong CPU Key
:Getting info from 192.168.......
LockDownValue is 32
Wrong CPU Key

Thanks for a great tutorial. Just did the rgh3. 0 on a falcon 16mb and perfect. Instant boot everytime so far. I didn't have high expectations for the 3.0 but truthfully, it's turned out better than the rgh1. 2 jasper's in my possession, so pretty damn good. Thanks.

do you have a discord

Can you make also a full video on a from rgh 1.2 to rgh 3.0?? Because my jasper cbox 360 just bought it for a 2nd hand u dont have the original dumps

Just ordered a kit!!! Awesome price and thanks for the help!

Can you make a video on zephyr xbox360 rgh2 new timmings by octal450 aka josh davidson?? Because i have one that i cannot do because no detailed videos tutorial of guide to do it bymyself

thanks so much for this video, i'll try my first rgh in my console and your video is amazing! let me lucky. Brazil here.

Hi, great video.Yesterday I've done an RGH 3 on a trinity but I've confused inverting spi nand blue point with green point because I didn't look well schematics first. I've notice this after writing ecc. So I have a bad nand backup. Of course console after writing retail nand gives me red light and black screen. Could you help me? Only solution is donor nand? Thanks in advance.

Hello, I see your resistor and diode kit on the site, but the cables are not included?

A bottle of Mountain Dew on the table while he's working on an XBOX....

~wipes away tear~

Suggestion: love your videos.

Can you do a tutorial on using the ext_clk method on a Xenon Xbox? Seems like most people these days have updated their dashboards and can’t use JTAG anymore…

It’d be awesome as this is newer and apparently stable. And there is not that much info out there.

it appears to me the wrong cpu key, what should I do? i have xbox 360 fat/jasper 512

@
TheWeekendModder Great video I need help I install everything and I create the ECC and Write it to the console but now the console won't boot the only thing is the green light flashes and nothing else what I can do please help

Great video.. here how to know if you got a good swicthing diode or a fake one test take one end to AAA positive side diode on the bottom of the AAA battery ohm reader ground ohm reader on the other side positive if your reading 0.201 or higher there will be some leakage current if so it's a good one.. if you are not then it's a fake online diode might matter on glitch boot ups worked on a Jasper BB

I have a RGH 360 that has stopped glitching. Is there a market to sell these? Like would anyone have any interest in buying it? I have no use for it anymore. I only used it to download games to try before I bought them. I have since owned a One S, One X, and now a Series X.

I’m well past the 360s lifespan so I literally have no use for it.

Your solder tip could use cleaning or replace

Hello. Which one of them should the 1n4148 diode be used? There are several types of diodes that differ in characteristics. There are diodes with different mA numbers. What characteristics should there be?

I K*lled mine... it glitched midway XELL and now it doesn't turn on

Once you add solder to any stranded wire regardless where it is at it will become a lot stiffer at it's connection point!

What size heat shrink tubing do you use?

question before I buy anything can I mod online and use mods? can I use mods for achievements? and can I get banned if I use mods or mod for achievements?

Great vid and tutorial, I would have ordered one of your RGH3 part kits, but I in UK.. So i order of amazon - The 22 Ohm resistor - does it need to be a 1/4 or 1/2 watt .. Many thanks

Hello friend, I am from Latin America and it is difficult for me to get the 1n4148 diode, can I use a 1n4147 diode instead? Help me

Just tried this on a BB jasper. Would not boot to xell. Checked soldering and stuff multiple times but no go. Windows 10 a problem? I read nand twice no problem and wrote ECC.

Hi can you use the raspberry pico to flash nand of Corona 16mb no need for post fix adapter. I've seen another video where you rgh V3.0 without the need of a glitch chip. Could I do this using the raspberry pico, for this installation. Regards Andy

Hello friend, is the CPU_PLL point duplicated somewhere? I accidentally tore off a piglet, now I can't solder.

hello I don't have the resistors you installed.
But I have the 1.2v regulators, will you have a diagram to install them? Thank you

My cpu pll point just felt, Is there some alternative point for that?

He's back HES BACK!!!! Absolute hero.

SUCCESS! Thanks for all your help! I got a few tools from ya too. I really apricate it!

Offtopic: Do you know a good source for Xbox 360 controller parts? genuine is preferred but quality 3rd party is OK too....

Thank you a lot for your detailed videos, I always wanted to mod my xbox 360, bought some components but the methods and names of those were so confusing I never understood how to do it.

Thanks a bunch for explaining it step by step

Mine is just flashing green light after writing ecc can anyone help

hello I would like to know what are the wattages that I have to choose for the different resistors for the RGH 3.0. should I take the smaller ones or the larger ones

Did exactly the same procedure, but when I turn it on power button, the xbox 360 automatically turns off after 10 seconds. Do you have any ideas what it could be ???

Can u use the same wiring for the glitch chip on a xenon i have matrix v3 with crystal so will i have to desolder that and do the bridge on the glitcher

Hey mate my console after writing ecc turning it on it powers off instantly what have I done wrong

for u runner glitch2 i only see CR4 no RGH3 how do i get RGH3

Is a 22k ohm 1 watt resistor ok to use

@TheWeekendModder Is there any advantages or disadvantages to using Kynar wire for RGH3?

Thank you so much for this!! Ended up having to resolder the RGH wires like 5 times (im kinda new to this) but at the end it booted into Xell! Again thank you.

Magical. I just got your PHAT RGH3 kit and Xell booted first time. Really cool. Now off to see what this thing can do!

Quick question but if I Rgh my friends xbox that’s Flashed would It still be able to play backup games or would i have to re flash the dvd drive after thx ?

King is back, i learned to rgh watching your tutorials years ago

Hello everbody , i wanted to ask U for help. Ive Done the create ECC and write ECC before i even connected the diode and reaistors to my Falcon. Can i continoue normaly and Connect the reaistors and everything and create the ECC the Second time ? Or have i bricked my console allready? Thank U for the Help and sorry for my Bad english!

I really appreciate the work you put into this and your website. It made modding my Falcon go very smoothly.