Kintips How To install RAM on Acer Predator Orion 3000 PO3-620 2021 XPG DDR4 3200MHz 16GB x 2 U-DIMM

i heared you cant remove the graphic card without damaging the motherboard. is that true?

hi, the ram i have in my computer (the same of the video) is a kingston (1x16 GB), is it compatible with any other ram as long as the mhz are the same (i think its 3600 mhz) ? I would like to by a Corsair Vengeance LPX DDR4-RAM 3600 MHz. Also can i put 2x16GB so to have 3 rams ?

The exact video I was looking for!! I have the exact same build and am super caustious about touching the inside (new to pc gaming) I thought you couldn’t have 2 different ram sticks in the pc? And do you have any other recommendations of 2 16gb of ram that are a little cheaper? Thanks for the video!!

What's the speed that your Memory ram is running on exactly now
I've installed a new memory ram ( from Corsair 3200 ghz) and sadly it's running on 2133 😢😢😢 do you now how to fix it.
( I've the seem pc 👋)

What is the maximum length for the GPU card? Can it handle 300mm?

I have a different question about the pc, I have the same pc, I wanted to change the power supply and I was not able to put in the power supply because, I needed to plug in the 24-20 pin connector to my motherboard, but I can’t find that in the motherboard, what do I do about that.

Hi can this desktop support liquid cooling ?

can you tell the model of ram exactly you use

Found some good questions in the comments. Just gonna leave the comment to remember this video.

Does the noctua nh u9s work for a orion 3000 case rtx 3070 i7-10700K without having to remove the motherboard, if not what cpu cooler works?.

I'm using t force ram sticks and I'm having the same issue where the heat sync is blocking the ram. Is there a way to slide it in or firmly press it in? Intired before and my computer wouldn't show up on screen and kept screaming a alarm at me so I took them out and am afraid of taking out the motherboard

Hey there. I have the same 16GB x 2 XPG RAM I am wanting to add to my Acer Predator Orion 3000 (PO3-620). Every time I've tried though, I am not getting a boot up screen, the PC continually turns on and shuts off after a few light cycles. Did this happen to you? Any suggestions?
We are using the exact same PC and RAM configuration.

Do you need to remove the graphics card before adding/removing RAM?

i tried to put my ram in but the graphics card is blocking the thing to open it.

1) : In my PC orion 3000 po3-620, i don't have XMP option in Bios because it is an old bios ! So you can buy the best RAM, it works only à 2666 MHz... Basically...
2) : I changed myself ram... i done this manipulation and graphic card touch the down of ram socket... its better to put off GC... for me, i put ram in forces without GC...

This vidéo is so strange... a little bit bullshit....

I wanted to like this video but why did you move the camera to the worst possible location?>???

That ram ain't gonna run at full speed, you need to get non xmp ram

I installed Corsair vengance pro 3200 msg and it runs at 2133 I have the same pc how can I fix it

How many nvme slots in the motherboard?

do you need to do something extra in BIOS or do you just install the ram and it works correctly

If I bought this pc could I do future upgrades.? Like buy better graphic cards and ram/storage etc.?

Mine won't unclip due to the graphics card being in the way

Does it support DDR3 ?

I have a question I just installed 3600mhz ram the ram mhz are stuck at 2600mhz is there a way I can unlock this problem cause I can't seem to find the xmp on the bios

Can you please please make a video on how to install a second SSD drive in the Orion 3000 thank you！

hello how do you connect an internal hard drive?

Ik that doesn’t really fit rn and this video is 1 year old but I still got a question with the bad cooler if you know if you can change that cooler then pls give me a answer thank you

I have a question, how did you unlock the XMP in the bios? I have 2 stick of 3200 in stock and I don't want to put it because I can't find the XMP. Can you help me?

The only reason i was here is to know how to change ram and how to open those snap thing witvout having to take out the whole graphics card and you chose the most poorly camera angle for it

thank you that help a lot :)

is there any place to place more fans? and if yes, what fans should i use?

my 2nd ram is not registering, What do I do? they are both the same ram and DDR4, am I doing something wrong?

Hi! I have one question. Those this Ram works at 3200 mhz?

Hello hello I have a question I have a computer Acer Predator Orion 3000 PO3-600
Intel(R) Core(TM) i5-9400 CPU @ 2.90GHz 2.90 GHz 12,0 GB can i change ram to 16 GB If so, which one is best to buy thank you in advance for your help

i have almost the same PC, but with a rtx 3070. Like in your video it seems that i cant open the RAM CLips at the side where the graphic card sits, because of to low space. But if i see it correctly, its enough to open them on one side and put it in, right?

Wait, I thought the Orion 3000's motherboard can only support RAM frequencies up to 2666Mhz?

Hi sorry for this question. But Which cable do u connect for feed HDD? What's the name of the part of cable that is connected on the motherboard? I've got this prebuilt for a member of my family & I dont understand how to connect SSD SATA/HDD on this acer predator Orion 3000... Ty ! Nice video :)

sorry but dont buy this pc. acer is bad. never i buy this shitt....

Gave you a like on this, but I have to agree with others...you should be more mindful of your camera angle. Also, no where in your video did you mention the two tabs for each slot that need to be opened or pushed back in order to install the RAM, and how they will automatically close when the RAM is seated correctly.

Hey, amazing video, i'm also wondering if you know if you can replace the backside fan? Mine get slightly noisy from time to time, and if i could i would very much like to get a fan thats quieter

Hey there!
I have Predator Orion 3000 PO3-620 RTX 3070 with ram 16GB (2x8).. I'm trying to buy the corsair vengeance RGB Pro 32GB (2x16GB) DDR4 3200mhz... do you think its completable? or should I look for other rams? any suggestion or help will be appreciated :) thank you.

How many fan do u have in ur gpu

Anyone have a hard time with xmp, because I installed new 3200 mhz ram and when I turn xmp on it still runs at 2133mhz

Hi, I have an acer desktop predator orion po3-640. I would like to get a 16 GB RAM but I don't know which RAM is compatible and I would like to change the network card from 1GB to 2.5 GB. Regarding the network card, can I Take any network card?

But how did you move the back clips because they hit off the gpu

Hi ive recently been thinking about getting a 1tb nvme do you know if i need to change anything else or can i just pop it in the second slot and screw it in and be done, i dont know too much about pcs so i was worried i would have to connect other things etc

Hey brother do you know how to update the bios on this type of machine to get the maximum speed of your ram instead of 2900mhz