Комментарии:
5 jahre alter Samsung ue55mu7049. Genau der Fehler. Pin 14 - 24 angeklebt. Alles funktioniert wieder! Noch nicht mal der kleinste Pixel Fehler. Super! Danke!
ОтветитьLed wont turn on but the red light is flashing i open the tv the boards are in good shape but black screen 😢
ОтветитьWill be good if the guy explains what he's doing.
Ответитьvery good!
ОтветитьI tried this. The sound works but not the screen.
What am i missing?
I dnt want to buy a new Tv cus it’s mostly use for cocomelon only. LoL
Hi I have a samsung UA70TU7000U turns off and on with flashing red light 2 times ?
ОтветитьThanks for the video, my own Samsung smart tv is model AU50UA8000U, same panel problem but only one ribbon from the main board to the panel, how many pins from the right or left can I isolate to make it work very well
Ответитьsuper perfekt !!! thank you !!! 😂
ОтветитьHi, I’m trying to repair my Samsung tv, which has the same internal layout, and the problem for me is one of the two cables, but I cannot figure out which one, if one is connected the tv stays on, if both, it bootloops. I tried blindly your same pins but it doesn’t work for me, gonna lose some sight trying to figure out which of the gazillion pins are the culprits ahaha
ОтветитьBravo shqipe flm 👑👍
Ответитьi have the same problem but don’t really know how to fix it😢
ОтветитьSAVED MY POCKETS!!!! THANK U!!!!!
Ответитьthanks for the video. I fixed the TV myself. I had the other plug, but in the end I found the right pins. thank you.
Ответитьthis has worked for me but my TV has another issue due to me covering the wrong pins I'm guessing, how do you know which pins to actually cover?
ОтветитьI tried this method when I got the same problem and it got fixed. TV turned on successfully but recently again the same problem came. I tried to do the same method again but it is not working again. Please let me know the solution for this. I contacted Samsung Technical team and they are saying the display might have gone and need to be replaced which costs huge amount. For that amount, a new TV will come. Please sugest me the solution.
Ответить🙏🙏🙏🙏🙏🙏🙏🙏🙏👌👌👌👌👌👍👍👍👍👍👍👍
ОтветитьWorked for my 50' series 8 TV!!! No pixel line blacked out issues.
ОтветитьWhat could the problem be if the rebooting continues even after disconnecting the ribbons from the main board?
Ответитьanyone only have 1 ribbon cable?
ОтветитьI am facing same issue with my Samsung UA50TU8000KXXL. Servucr engineer asked me to replace the panel which costs ₹.10500. Thank you so much for the video but how to identify the disconnected lines. Please explain, or would be of great help to fix the issue myself
ОтветитьWhat tape are you meant
to use
I habe the same problem but curious behavior. TV is in bootloop. Without mainboard backlight stays on. Without panel ribbon (only one on my GU50TU8079) TV starts completely with sound. So power and mainboard should be fine. Now I isolate pins and it doesn‘t matter which pin or pins i cover the tv starts but still without picture. Any idea what I can try next?
ОтветитьNot all is same in this vid mine is on the bottom cable, and pin number 14 from the left side of the ribbon cable. Not a perfect solution, coz even i have narrowed it to the one pin, still there is a faint line gray line barely visible, and from 8-9 ft far it is not visible. Well at least we can prolong the lifespan of the unit till it will broke permanently. Thanks OP.
Ответитьhorrible job dude.
Ответитьafter about 6 hours of trial and error i got my 60" Samsung fixed, other than a couple of very faint lines.... plugged it back in and set all of my stuff back up... turned on my PS5 and started playing a game and POW..... back to the powerloop. I give up. ill never purchase another Samsung product in my life.
ОтветитьOkay so I got the Led light to stay on after adding the tape. That’s definitely progress, however I’m still not receiving picture on the screen, just like a bluish back light. Do I just need to move the tape around until picture comes back?
ОтветитьIf someone could tell and or explain to me how to know which pins to cover first as a starting point I would appreciate it. The man in the video did not start on the end of the ribbon and work his way across. It would appear to me he started at a specific point for a specific reason. Maybe I’m wrong and maybe he just happen to guess correctly but something tells me he is pretty smart so there has to be some logic as to why he started 1/4 of the way down the ribbon and not at the beginning. Thanks
ОтветитьHi to mine the screen is on but the sensor is not working what should I do?
ОтветитьMy tv has backlight, sound…ai have tried to cover the pins in each sides, but the image still doesn’t come up!
ОтветитьWould replacing the ribbon fix the issue also ?
ОтветитьCan you help me why the screen is shaking and have some faint thin lines ?
Ответить😢😢😢 I can’t thank you enough. You helped save me a lot of money and depression. God richly bless you. Can I at least have your contact or get in touch with you
ОтветитьMy tv stated todo that when my screen was hit do you think it could have the same problem?
ОтветитьIt didn’t work for mine.
ОтветитьI still have no pictures. The backlight turns on for a moment and that's it. No picture, no sound. UE49KU6172U
ОтветитьThank you! Saved me a lot of money. Careful when removing back panel the corners crack easily. Mine was the same cable but the bottom half, get one regular piece of scotch tape and a thin one and work ur way down the ends keeping track of the little pins , took me like 2 hours testing both cable strips but eventually I narrowed it down. When u narrow it down to the possible area look closely at ur screen for lines or blurriness then pin point if the tape needs to be more thick or think and its that easy
ОтветитьThanks, it worked!
ОтветитьDo you have solution for the same problem but for model Ue50tu8000?
ОтветитьNot recommendable product ang samsung TV..sa amin wla pa two years sira na
ОтветитьCan anyone explain me why this Has to be hided by tape ?
ОтветитьI did same method but still didn’t get any pictures
ОтветитьIt worked 🎉 Thank you so much
ОтветитьMy TV is doing the same thing except when it powers on I get the Samsung Smart TV logo in the middle looking completely normal, and then everything goes to black and the whole TV restarts itself and does it all over again over and over. Could it be the same issue?
ОтветитьThis helped my tv from turning on and off but now my screen is black. Sound and power are working perfectly, but no picture. Help!
ОтветитьThanks man, this absolutely works 😅 didn't have money for a new 70in set
ОтветитьI did covered about 10 pins from right to left. The colors in the screen were just about perfect, however, after mounting TV on the wall I noticed a back and forth brightness going to normal to lower coloring not much difference if you are not looking for that but it is happing... My guess I have to take the time again to find what pins I can covered and avoid the little small flickering of color. If I have to guess it is happing on the left side of screen if you look at it in front of you.
Any of you had the same problem?
Amazing info, but why does this happen in the first place? I was sleeping in the chair, woke up and my TV was doing this. Seemed to be no problems leading up to it. Why would a TV just start doing this?
ОтветитьLast time I have same problem at specific time. But it opens in specific time as normal but I fix by remote. Again I’m facing same problem I will fix by remote for me I didn’t did this just remote works
ОтветитьHi there, I have a Samsung smart tv with the same issue, all the backlights are working and all capacitors look good. There is a unit on the bottom centre of the unit that has 2 ribbons going to it shall I try and insulate from here as I only have one ribbon cable going to motherboard will this still work and how many strips should I insulate at one time? Liked and subscribed thanks.
Ответить