Wireless GO Features and Specifications

I have one of these but it Does not work on samsung Galaxy s23 Ultra. Do you know why?

Why aren't there firmware updates for this model? Are you really telling me that this was just to be used as a accompanying mic not as a stand alone audio? Why isn't it compatible with Rode Central?

I recorded a skit and the rode was rubbing up against my clothes and ruined the take. How can I prevent this?

Got this today and so far it has been bad experience :( cant connect to PC, Rode Central wont recognize neither the RX, nor the TX. Bought an SC15 to hook it to my iPhone as it clearly says that the cable is compatible with iOS devices only to find out it might not after all work with the GO and only gith GO2, ME and PRO. This was supposed to be a hassle-free, quick and cheap way to test if this is something I want to get involved. Turning more nerve-wrecking by the minute.

Why is it only mono and not stereo. Am I missing something?

Is it possible to connect the receiver to give direct audio output to, for example, amplify sound with speakers live while presenting and such?

Can I pair 2 mics to one receiver? Say I’m shooting 2 ppl and what to capture both going into one recording source? Cheers

If I got 2 Wireless GO, can I use 2 mic on 1 receiver?

Is it just me or does anybody else's receiver pickup autofocus noise from the camera? The whole reason I bought a wireless system and stop using my shotgun like was so I wouldn't hear my camera's autofocus system. This thing is just as loud. I don't know why the receiver would be picking up sound when I'm wearing a microphone 10 to 15 feet away

How do I connect this to my phone?

How does this connect to newer smart phones that do not have an auxiliary port?

Is it possible to connect the transmitter to an audio mixing board in a church setting to capture all the microphones of the singers and instruments from the band simultaneously? Thanks in advance
-Chris

How did you setup monitoring the audio with the Apple AirPods?

Hi..which cable to use to connect mic with type C type mobile?

how do you update the firmware? I have 1 and 2 but 1 doesn't work with rode central.

can this set up be used on a laptop and in OBS Studio or some other app if i connect the reciever to a laptop via headphone/mic 3.5mm port?

Hi ! I want to know how many transmitters can be paired with one receiver. Thanks

Ryan...I shot a promo clip recently and the sound pick up was terrible grabbing heaps of static noise, rubs from the lav mic and pops as the talent narrated. Any ideas why as this has never happened before? I was using the exact same setup (including a rode lav mic) that you are demonstrating in this clip. Txs Mike.

How do I connect the Rode Wireless Go to an Apple iPad 9th Generation?

can you use the mic input for any input or is it just for the lav mic ? if i wanted to input the sound source (output ) from a sp404mk2 ?

I have 2 sets of Rode mics and they are not working with my iphones 11 and 13 . They have worked perfect before

Where is the sound recorded to? Has it got built in storage? If I’m using it with my iPhone, and it’s pluged into the iPhone, does it store the soundtrack on the phone and replaces the phones own recording? Basically, how does it work with the sound?

Awesome video. You won me over. Great "host" of the video also!

Thank you. Which camera is that?

Can anymore tell me it's not working for me to the smartphone Android

Is there a built in mic mute button? Can it be used with a mixer?

Is rode SC16 supported for first gen wireless go?

I didnt fully get it.
IF I want to record videos just like this one. How would the setup work?

One of the pieces would go close to my mouth and would I be able to get that audio into my computer obs studio software?

Can I run a line from the aux out on my sound mixing board at church to the Rode Go transmitter and then plug the receiver into my camera for live stream video?

How would you monitor the audio live with airpods on a phone?

What case is that on the iPhone with the camera lens this thing is supposed to attach to?

Did you use the Rode Wireless Go audio for this recording?

Looks great! Is there an indication to show that the TX and RX are fully charged?

I’m sold for sure I’m going to be new to this so the fact that it’s simple to me on top of all the extra stuff is priceless to me

I am using the the Rode Go with a lav plug in. The problem I am having is that the built in mic is still active. This is causing wind noise and other back ground noise to be recorded. I would have hoped that plugging in a lav would have disabled the on board mic. Any thoughts on my problem. Thanks!

Is there a record button to press before shooting? I plan on shooting interviews and then syncing the audio with my phone camera footage.

Hello dear friends,
I am using the RODE Wireless Go for a while but i am really dissapointed you dont have any firmware upgrade and that the Wireless Go cant work with RODE CENTRAL..

You should make it also possible for us WirelessGo users..

Waiting your kind reply

Thanks

my is my screen on the receiver gone white please

RODE company very very nice

Can I pair this with a Bluetooth speaker?? I conduct wedding ceremonies and trying to find the best affordable system for me

My volume is suddenly way to low. I have to raise it by 300% in post. It was working fine, then the next day, levels are beyond low. The dB settings were not changed and set to the highest level.

Im already ambivalent to the quality, or the fact that the clip does not allow for pointing the mic to my voice, which for an active channel as mine, means that when I turn my head, sound goes flat. Im at the point where I just want to know what happened with my drop in volume? Adding it in post also adds the ambient noise levels to a non acceptable level for 200 dollars.

Hello! My Tx divice do not turn off when I press the button. And when iboth are sync the Rx show the battery of de Tx as it's already empty but the Tx still been turned on. Some help please?

If I was using 1 camera but need to mic 2 people up, am I able to connect more than one LAV transmitter to 1 receiver. Obviously if I was shooting on 2 cameras I would use 2 transmitters and 2 receivers. I'm confused on how I would go about capturing audio of two separate people with two LAV's directly into 1 camera though?

Can't get mine to work with my iPhone SE or Motorola Android phone. With the iPhone the video has a quiet rapid clicking sound. Nothing else. With the Android it doesn't even cut out the phone's mic. The meter is hearing my voice. Could it be the SC7?

Can the receiver directly connect to phone wirelessly for e.g. some phone does not have 3.5 mm Jack

Just bought it, love it

I just got mine today and I have to say I am blown away at the quality, I don't have to alter the audio at all in Davinci. Thanks for creating one of the coolest items in my set up. Bravo !. Frank

I feel really dumb here but I don’t find
a basic used manual anywhere in the website. Thanks for explaining how to power on the TX and RX and how to use the db button but my Rode Go 0049040 turns off after about 15 seconds of audio. Plus what is the other button on the RX for? Can you send me a link to the owners manual?