Комментарии:
Apart from using a flat ground and stake, the fans have these tiny icons in the middle. Make sure the pointy part of that icon is pointing straight up or down.
Then use the R function of the ultrahand to align things from behind. If you can avoid moving link at all during the process, it makes it easier.
Fala de mais
Ответить"great sky island gumball machines "
Ответить5 and a half minutes eh. Get to the point.
ОтветитьSo, when you make the first connection, you want to show us the connection from the side view instead of us just taking your word for it.
ОтветитьOne way to make sure the fans are aligned is to simply pick the fan up with your hands and then set it down in front of you.
The fan will be perfectly aligned with you and then you can use Ultrahand to pick it up and voila, the fan will stay aligned unless you rotate it.
This is really helpful, thanks
ОтветитьI want to build a hoverbike
ОтветитьDid it perfect first try thanks to you! Great video!
ОтветитьThis has no reason being 5 minutes long
ОтветитьI built this slightly off the first few times, abd coukd control it worth a damn!
ОтветитьThe sky island with the Flux Construct, above Tarry Town, had all the parts you need. You dont have to take them from your own inventory.
ОтветитьThanks for this tutorial! I’ve been going through hell and back trying to get the hover bike to line up.
ОтветитьI built this thing a couple of months ago. Now I need to do it again...and I just can't do it. I've spent 3 hours doing this over and over, well over 100 times, and I can't even get it straight enough to stand up. I'm using the same technique I used that got it done in 3 tries before. I have no idea. Oh well...I'm not doing anything else until this is built, even if it takes another 100 hours. I'm either going to get good at doing it or I'm going to be doing nothing but building air bikes for 8+ hours/day until I do.
ОтветитьBruh, i swear i hate this SOOO MUCH. every time it doesnt even let me control the stick, like what is happening with it?
ОтветитьIt worked,mine veerse ever so slightly to the right but I'm not messing it because I'm worried I'll never get it to work properly again,yes I do have autobuild but I'm still concerned
ОтветитьThanks!
ОтветитьMine doesn't let me drive it. There's no prompt to press A and control it
ОтветитьYou give no technique tips. Its just basically stick it together and hope. Pointless video.
ОтветитьThank u bro i just subscribe
Ответитьhard
ОтветитьI wish there was a way to activate a stabilizer without activating any other device on your contraption
Ответитьthat was no help at all
ОтветитьPro Tip: If you attach a dragon part (e.g. a scale to the back fan) your Bike pretty much won't despawn anymore if you move away from it. Dragon Parts have the highest despawn distance in the game and that value will be used as the base for the whole build. So no worries if you land your bike to go explore a cave or something, it will still be there when you get back :)
ОтветитьI can never get this god forsaken bike to work correctly
ОтветитьКруто 🔥🔥🔥
ОтветитьTrying to build this with joycon drift is a living nightmare
ОтветитьIf I had dollar for every time he said “you’re gonna wanna play around with it” … I’d have 3 dollars.
ОтветитьIf you want to transport heavier things like the shrine crystals, build the regular bike, grab 2 extra fans and just slap them on each side of your back fan, stand the shrine crystal on the middle fan in the back and fly away. You wont even notice its there
ОтветитьPro tip i haven't seen in a video: hold down R1 as if you're gonna rotate it and use that arrow to center things. You can even double check if one of the fans are slightly crooked by grabbing one fan at a time, holding R1 and making sure the arrow lines up with the steering stick when tilting it upwards and downwards, turn it and check both from the front and from the back. Then grab the next fan and do the same thing.
Extremely easy and fast to check
I just got Majora's Mask yesterday and found an easy way to fight Lynels. Walk in wearing the Lynel Mask (trade Bubbel Gems with Koltin) and with Tulin's avatar out. The Lynels mostly ignored me and attacked my invincible avatars.
ОтветитьAnd now the perfect hover bike with guns!
ОтветитьDid not think to use the construct head. Thanks for the break down.
ОтветитьThis really helped me get a perfect one thanks a lot I really appreciate it 🙏 😊
ОтветитьYou can tell if it's centered properly if the magic glue spot is a small dot vs anything with a thicker curved contact.
ОтветитьThanks, this will help.
Ответитьmarry me!
ОтветитьMine has a very minor pull to the right, but I can travel quite far before it pulls you too far off course so I haven't really worried about it.
ОтветитьPrefer a trike, that extra wheel makes short work of the depths
ОтветитьLiked and subscribed love the bike with the beam emitter really cool
ОтветитьThe ultimate trick is going to the central underground mine and going to the area where you can find three fans and and the hoverboard.
Use the lines of the tiles of the floor to alienate everything as straight as possible, while pressing R to show the red arrow.
The key is to alienate the tip of the arrow with the tiles lines, and use the start of the red arrow to set the position of the fans and the controller.
Its not perfect unless youre a prodigy, but i could make a hover bike that just tilts slightly to the left, but only JUST a little.
Its the closest thing to a grid we have in the game
I hate building this. People always skip over how to build it and you have to line it up perfectly or else it tilts
Ответитьthank you so much, ill do this
ОтветитьThank you for this it was such a pain trying to figure it out lol
ОтветитьWhat kind of nightlight do you have plugged in to the wall behind you, looks cool!?
ОтветитьMake sure to dismiss yunobo because it adds weight to your hoverbike
ОтветитьFIVE f*cking minutes to stick three pieces together, jeeeeezz
ОтветитьThe easiest place to build one of these (if not in some kind of base) is to find a Hudson area and get all the wood off of it and you are left with a perfectly flat and clear wooden platform. Doing this in the wild on grass or anywhere else can make uneven ground and tricky visibility.
ОтветитьFlat ground and a stake works wonders
ОтветитьThanks man, figuring this out was a pain.
Ответить