Our BEST Benchtop Woodworking Power Tools | Bosch Professional LIVE

Hi All, just want to make sure we tidy up a particular comment Dan made regarding 'removing the guard'. We would never recommend removing the guard, Dan meant to refer to the upper back-left fence. Hope that clears things up!

Bosch 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼🇰🇭🇰🇭🇰🇭🇰🇭🇰🇭🇰🇭🇰🇭🇰🇭🇰🇭

I’d does restrict the depth of cut by 5mm

So, Bosch UK website jist listed the new GST18v155 bow handled jigsaw, can't wait to get my hands on this. No price yet, also listed, the new GSS18v-13 sander, no price listed for this either, could you let me know what we're looking at for pricing on these please? also is the GSS18V coming with a carry case or cardboard box? the list details on the website say neither. Could we also have clarification on whether the base of the GST18V-155 fits the FSN-SA fitting the FSN series rails? I have this accessory and rely on it heavily, although it would be nice if the FSN-SA plate could be updated so that either the plate works where the splinter rubber is placed with a step to the other side of the plate to keep it snug to the cutting surface? I've noticed that my FSN-SA although it does a good job, takes time for me to set up a reference line by feel, so at times it's a hinderance rather than a help.

Can the laser be replaced for an led/shadow line on the gcm18v-216dc/gcm18v-305?

Is a rack & pinion planned for the table saws?

I hope Bosch would invest in the 36V platform again. All the competition has 36/40V tools and this type of saws would work better with higher voltage. Sometimes Bosch is just to slow to react.

Remove the Guard Dan???? I think you mean the upper back fence, left side?

Will the GAS 18v-M15 collection bucket be compatible with the 10 litre bucket ? It would be nice to be able get a larger collection bucket for my 10 litre thus saving me some time on emptying.

Can't wait for the new GAS18v-M15 series extractor. I had mentioned internally with a contact or two about solutions to this matter including connectivity and support for non-bluetooth devices. I hope someone took some of my ideas on, I know others have submitted similar or better ideas, so this is a positive step forward. I would gladly give my GAS18v-10L extractor in part exchange as for me, though a good general extractor, it's not designed for what I do and even with a ProCORE battery running, you can't really get the best out of it. Pleased that the new cordless brushless recip saw will be out some time soon. For me, the recip / sabre saw is a weapon in certain joinery applications, it's not just a demolition tool, it can be used with some suitable blades for joint cutting on large beams, etc and can make a significant difference. I hope to God that you are right about a new GOP18V to replace the current model. My GOP18V-28 died and I've never replaced it. I had a very scary incident with it and it's death indicated a serious problem, it was out of warranty, so the batteries were kept with the charger, but the GOP had to be sent to that toolbox in the sky. For me, Oscillating tools are a vital part of a blind cabinet maker's tool kit, I use mine as a surgical chisel if you like, so when I'm cutting particular joints, sockets, etc, that tool is vital, but there were weaknesses in the tool including it's overwhelming desire to speed throw on it's own in the middle of a cut, the speed control dial would shake itself and move, etc, so towards it's end, it got a bit scary to use. Sad really. I really think that we need to look at the GOP18V as a brushless unit / maybe biturbo using the spec of the top end corded starlock max tool, after all, when you have a cordless multi tool on site, if you're chopping in to a frame as an example, you need a long plunge blade, that doesn't exist in the starlock / starlock plus range and ideally the oscillation arc needs to increase to 3mm per side for better waste removal and efficiency of the cutting head.

For anyone following the chat session, I'd like to clarify two areas for anyone considering buying the GTS18v-216 cordless biturbo table saw. 
Firstly, yes, the T slots are "Euro specification" 3/4" / 19mm slots, so they will support standard specification mitre fences from other manufacturers like Axminster, Kreg and INCRA as examples.
Secondly, when it comes to performance, this saw pwerforms like the mains edition and is near to the GTS10 series but is not a 10" table saw. A question was asked as to what it performs like for ripping 2" x 6" and 2" x 8" stock. I can officially confirm that when set up using an Expert For Wood Ripping blade with a 12 tooth or similar spec, you can happily and efficiently rip through stock with an 8AH and 12AH ProCORE battery and get a job done.
I was alerted to a video from Badger Workshop demonstrating the GTS18v-216 Table saw, where the reviewer stated the saw would happily run on a 2AH Coolpack 18v saw. DO NOT do this for anything more than 5 minutes or less as the battery will boil. I would never as a saw operator advise a new owner to use a 2AH coolpack battery on such a saw, they are not designed for that kind of draw.
Saw Stands for the mitre saws, you can purchase the following: GTA2600 folding leg stand, GTA3800 Folding Leg stand and the GTA2500W wheeled stand with sliding rails. I use the GTA3800 with the optional transport wheel kit and it gets me out of particular situations, but I wish the GTA2500W stand could be improved upon for site use where large beams can be cut more effectively by making the support arms modular for monger pieces which can park on the stand in transit mode. I have a development solution for this. These stands will willingly support other manufacturers saws, but why would you want to have a bosch stand for something less sexy by another brand?

Keep up the amazing work with these live streams, they are informative and really make a difference to either new customers, current customers seeking inspiration and clarity and those who need details on upcoming systems and projects.

Will we see a demonstration video on the Bosch guide rail system, it's accessories, tutorials on replacing anti-slip and anti-splinter inserts, etc? This is something we discussed in Part 1 and the possibility it might be covered in Part 2 or maybe a later video. I do believe this would be a beneficial video for those looking at the Bosch rail system, which I'm a proud user of.

A shame Lawrence wasn't there, maybe he should get a hair dryer on the seats of his car, just make sure no hair product gets used in the drying of his seats otherwise he may become a hair dresser :).

Hi Mates
Again I liked what i‘ve seen, what I got to know and what i found out about upcoming Models! Especially the GAS 18V-15C and everything especially around it. Starting it from a Mitersaw, a Plungesaw and so on. I am very very excited what Bosch invents into this direction!
Thank you so much!
And again I look forward to the next Livestream!!

Greetings from Germany!

Acá estamos con espectativa de ver el vídeo excelente Bosch para mí taller

Mí anhelo😍😍 ya compre sensitiva bosch 2400 heavy duty espero comprar la ingle boss y la circular de banco para empezar el micro emprendimiento de muebles industriales en Córdoba capital