Restarting Flat Lithium Battery Hacks That Everyone Should Know

this also works on lead acid and glass batteries, I have scored many a free battery because of "hibernation mode'

Misleading name to the video.

A physical demonstration would of been awesome for those of us that walked past the entrance gate at school.

You could just show it without talking in a 15 second video

I’m I the only one who felt he explained it in the most complicated way possibly anyone else could’ve done!

did not show how to do it show us

Any experts out there??

So is he essentially saying is to connect a DC power source in parallel to the dead lithium battery n jump start charging it that way??
Any gurus PhD’s out there to confirm this??

Holy shit this was absolutely useless

Carefull, not every battery has a safety bms, so li-po battery's and li-ion cells inherently do not have bms on the cells themselves, you need to add it for them to be "safe"

Hi, I have a 48 Volt 10 AMP battery that will charge for around 5 minutes then when I use the electric bike it will die very very quickly within 15 seconds how do I revive that battery. It does have a built in headlight and that's the only way that I can think of to discharge it. Or should I get another 48 Volt good battery and just go positive to positive negative to negative any help would be appreciated thank you Andrew

Would a 12V battery start up a 48v ? I have only one 12v

Good video but im sorry you felt you had to risk every-ones well being by piersing your right shoulder with tattoo.

Great hack. My 6 vah battery went dead and got zero voltage at battery and charger. Used a car charger at 10 amps [2 amps didn't work] and charger started.

Who else is pooping 💩 yeah me neither 👀🫣😖😫🥴🥹

lol...zero for communication...repeat 6 grade please

How to revive an SOK Bluetooth Lithium Battery and bypass BMS
The BlueTooth has discharged the battery and you can't charge it.
Open the battery and charge the cells directly for about 10 minutes - after try charging from the top through the BMS. If it doesn't work, recharge all the cells bypassing the BMS to nearly 100% capacity. If the BMS still won't work:
Disconnect all power from BMS, let it sit overnight, make sure you charged the cells without the BMS to about 80% - reconnect the BMS, start charging normally through the BMS on top of battery.

I Call it Boost , and have done it for many years , put the charger on and put a ekstra battery to the discharge port that is on full charge ,and boom , the charger starts up ....

Sound quality is crap

I have a dead 36v what do I do then ?

hello can you explain to me the function of the wire on the lin socket?
is there a 12 volt present if I connect it to negative, should it interrupt the 200A' relay?

I have a 110ah slimline with inbuilt DC DC charger. It has ran flat.
What is the best way to recharge?

Does a serious over charge degrade the battery and if so how to fix like an undercharged if applicable??

Will this work on a solax battery please. I have two 6.3kw linked. I think I may have one that has shutdown as they only charge to 40% then start sending excess power back to the grid. A step to step guide for a solax battery would be very helpful. Thanks so much

Thanks, your simple explanation helped me revive my lipo4 battery!

Wowww.... this tip saved my life!!... This is exactly what I had to do to get charging again, not a full BMS shutdown. I am hooked to your site forever, and why does Enerdrive not tell you this I wonder? Thank you, thank you.

zzzzzzzzzzzzzzzzzzz

Thanks, just about to buy a lithium battery.

But how do you flatten the batteries if they have bms low voltage cut out ? Surely that would make it impossible to flatten beyond the cut out level

Great Video Bud,

Another great video. From my understanding using the “supply” mode (momentarily) in a Victron Smart Orion DCDC charger would suffice? Thanks

What about with built in DC DC charger?