The best upgrades for your Bambu Lab 3D printer

THANK YOU

Just got my P1S last night but cannot find the printer via orca.

Orcaslice keeps crashing on my Windows 10 workstation.

Why don't they add a heater and fan to the AMS to dry the filament?

Best Bambu upgrade: Glue stick 😫

Immediately ordered one of those build plates from Ali Express

Michael is an android? Michael is an AI? Michael is Asperger's? Michael is all three?

Are you able to use the Bowden tube Y splitter and the AMS to print in 5 colors?

would you rather pick a mk4 or the X1?

Can you upgrade a P1P to print as high quality as a P1 Carbon?

F.Y.I. Clough (as in Clough42) is pronounced like "enough" not "bough".

Your voice reminds me of richard ayoade from IT guys haha

Thanks for the vid! How about mods to get rid of the atrocious noise the printer makes?

Must say the Bambu lab printers don't impress me for the price. Out of the 10 people i know that has the printers and ams 6 of them have had there machines breakdown within 10 months and go through a nightmare to get sorted out.

For the filament School Transfer I was expecting some kind of reverse feeding into the AMS system and pressing the unload Button 1000s of times

Have you tried LOKBUILD. I used on a build plate that needed the surface replaced works amazing. Pilled the old one off and had LOKBUILD from an old printer. Cut it to fit. Added a QR code. To me, it's way better than the bambu lab replacement.

beats the shit out of SHITA XL BY SHITEPH SHITA FROM SHITA SHITEARCH 🤣🤣🤣

speaking of bambu printers, is the x1 worth it or should i just get the p1s?

The printer looks nice but the privacy issues are too much for me.

Thank you - still trying to work out if X1C or go the cheaper P1S - but your videos are great and help out a lot.

Any chance to see a part 2 in the near future?

Wait for 24 months and see how Bamboo stands up to reliability. Also all I see is having to do costly upgrades with these units.

do you think pressure advance needs to be calibrated for x1c that supposedly does that with the lidar?
thanks in advance bro!

Definitely need to do one for the P1Touch!

Seems like either Orca Slicer defaults to 2 loops or maybe it imported my defaults from Bambu. Either way, it’s set to 2 automatically.

I'm absolutely astonished that a light bar or led mod wasn't mentioned. The in built led is horrible and detection doesn't work at all with black filament.

Chceck how to clean the GLUE STICK out of the bed on my chanell

Im struggling i got the peo plate but i cant make anything stick to it i used pla

What about CHT nozzles wtf

PEO sheet bed adhesion has issues consistently. I clean it with 99% IPA and set textured plate in slicer. Many many failures. I dont want to use adhesives. Any advise? Thanks in advance!

Excellent content

Very helpful video

Desiccant holders for the AMS are a "must have" if you own an AMS.

making the poop shoot is a great way to burn up old partial rolls of filament, with the AMS setting them all to say its the same type it just keeps auto switching unitll it runs out.

hey brother, have you looked at hueforge yet?

There are SO many clever people out here, that got so much knowledge. Why have NO ONE suggested swapping out the mainboard on either P1P or P1S with a better one?
Then we could have:

1. Wired LAN Connection
2. Touch Screen!
3. Away, better Webcam.
4: You name your thing here

I know this can be done, it could be done on those <censur> Ender 3 and many others, so why not this one?

I find that 3DLAC glue spray is works well with ot gunking up the plate like the glue stick.

i got a white bucket with lid and 5 kg of silica crystals kitty litter for drying
out of pocket 20$

Edit: it seems to be fixed in latest firmware update :)

I purchased PEO/PEI sheet, but I can't get good adhesion. It seems like it will not create good "squish" of the first layer if bed sheet is not recognized. I tried high temperature plate option and also textured PEI option. Nozzle is always too high for good first layer on that sheet. I know I could alter start gcode and lower nozzle by setting offset, but I will not do that as I'm often switching plates and I'm sure I'll forget to turn that back.
Or maybe that's forced by bambu lab...I don't know.

Outstanding super good video, thank you.

where abouts in Australia is the company located?

Why do people use ASA? All videos I watched show it's inferior to pla or petg in everything.

I bought the plate and love the patten after printing! The only annoyed thing is because it's a textured PEI plate, the big fan is really noisy during each print...

Man, I'm tempted to buy one of these simply because Dora Ding, the support rep from Fokoos went to this company... Since she left Fokoos support has all but died. :P

Fork of a fork of a fork....

Dont you get on the X1 an error when using the textured bed, because it cannot find the QR code?