Комментарии:
Dear Betafpv,
If I purchase ELRS DJI O3 version, can I switch use my ELRS controller & DJI FPV Controller 2?
Can you use DJI Avata controller and headset with that?
ОтветитьGuys i Love your products. Please consider me as a kol or reviewer. Yahooooooooo..
Mikey
I have DJI RC2 and DJI Googles v2 what need to buy else for fly? BETAFPV Pavo Pico + o3 unit?
Ответитьis this setup for this and binding the same for pavo20? I don't see a guide for pavo20 specifically
ОтветитьТо есть для того чтобы соединить Pavo Pico и Dji 03 не нужно ничего клеить и паять?
ОтветитьThank you for such a great short to the point video. Perfect length in my opinion
ОтветитьThanks for your video. How about binding the o3 air unit to the DJI Googles 2. I tried to bind but nothing is happening. Can i do it via DJI App or Betaflight?
ОтветитьIs there a way to use my dji fpv goggles v1 in this 03 unit.thanks
ОтветитьI thought you needed to use the DJI 03 antenna to be able to fly with the DJI remote 2?
ОтветитьGmjust assembled my Pavo Pico with the o3 unit. Great build. Good quality and very well designed. My unit don't get any electricity. Do I have to activate something?
ОтветитьGreat explanation!
ОтветитьPlease do you have any video for walksnail installation?
ОтветитьIf I use the O3 Air Unit, does it matter which rx I choose when purchasing the kit?
ОтветитьHow can I start/stop the record in the O3 air unit? I'm using a ELRS remote (Jumper T-PRO). Thanks!
ОтветитьWill mounting a naked GoPro here result in a significant decrease in stability?
ОтветитьAny video for walksnail installation?
ОтветитьCan I use my RC V2 DJI instead of ELRS?
ОтветитьI purchased pavo pico (o3).
I immediately set it up and test flew it.
However, when flying, the plane tilted back to the left little by little.
After 4 minutes of flight, it tilted about 30 degrees, so I had to "guess" the rudder at all times.
The FC settings have not been changed from the factory settings.
The transmitter used is a Betafpv LiteRadio3 (ELRS).
The above phenomenon does not occur when the transmitter is used in a different aircraft, so we think the problem is with this aircraft or the FC.
I have tried many times to calibrate horizontally.
We have also confirmed that the main unit itself is not tilted.
There is no problem with the weight balance of the main unit.
Why my pico have no power in O3 , what can I do ???
ОтветитьBut what about configure in betaflight and dji o3 ? Im new in fpv, flying dji fpv to this time , but I got now pavo pico and dji o3 with it
ОтветитьSO much FUN!❤❤
ОтветитьHi all, does anyone know if the "Tattu R-Line 2s 550mAh" will also fit to thsi quad?
Thank and happy low weights flights :D
Man, I'm trying to figure out the walksnail version over here, seems like I need to take the camera off the vtx to guide it through the front of the frame?
ОтветитьReceived the Pico (TBS version!) today, binding with Tango 2 doesn‘t work, binding with Radiomaster TX16S with ELRS did work, but no reaction in Betaflight. Same with DJI FPV Controller 2, binding worked but no reaction in Betaflight.
Enough for today.😡
Short and to the point video on how to assemble the DJI O3. Thank you. Is there any instructions on how to connect to the Betaflight and set it up with my TX16s?? Thanks
ОтветитьBetafpv Pavo pico TBS DJI O3 VTX works with the remote control TBS Tango 2?
ОтветитьPresumbly if using it as a pnp there is no betaflight configuration necessary? Or do I need to select sbus baud=fast in the goggles and on the baord?
Ответитьmini avata. I like thiis
Ответитьno way to mount decased O3 VTx?
ОтветитьWhich rx version do you recommend for using the Dji O3
ОтветитьWhen are you going to ship it? I already placed my order two days ago. Can't wait 😃
ОтветитьI immediately purchased two units.
By the way, can I use a DJI radio with the FC that comes with this kit?
To further answer your questions:
1. Which mounting hole on the VTX mount should the camera be installed on - we recommend the top one. This is to lower the camera position to further protect it from crashes. The video shows otherwise, but we do recommend you install the camera on the top mounting hole!😊
2. DJI controller could be used with the ELRS version of the whoop - please check out our product page description to configure accordingly😍
how do we know it's correctly wired?
Ответить105$ only for the frame Or all components ?
Ответитьthanks for the video, does the pico include fc and motors?
ОтветитьHello it would be necessary to make the same video but for Walksnail avatar V2.
ОтветитьThank you. With some steps, I had assembled wrong then followed your video. All the vibrations are gone!
ОтветитьWhat about if you wanted to bind the DJI Controller 2 to the quad?
ОтветитьLooks good 👍👌
Ответить