Комментарии:
I've seen videos and also read comments about people doing this to fix stick drift. Can anyone confirm that it's ever worked?? Let me know 😁
Ответитьthis is still stupid! you need to disassemble the controller
ОтветитьI’ve just followed this guide for my PS5 left stick drift and it’s really helped. It’s not completely fixed but the controller is at least usable now and only drifts occasionally. Thank you so much!
ОтветитьI don’t have stick drift but I have a ghost air in up direction pad that has ghost air
Ответить😂😂😂😂😂😂😂😂😂😂😂😂😂
ОтветитьOr get wd40 or bw100 flat head or red nozzle
ОтветитьI have a question: Does it have to be rubbing alcohol, or can it also be like for example hand sanitizer? Because hand sanitizer is still alcohol please respond.
ОтветитьI got anxiety from seeing the first clip.
Ответитьcleaning under does nothing. cause 99% of the analog is under that stick. unless you open it up and use a toothbrush or something. not to say it can't work. I've fixed stick drift with an air compressor in the analaog.
ОтветитьI fixed my stick drift a different way i placed my old ds4 infront of my tire then drove over it and went to the store buying a new one
ОтветитьThe best way to fix stick drift is to blow as hard as you can into the controller sticks, it wont break them, and you can easily clean the inside dust out of the sticks. Thank me later :)
Ответитьthis is kinda useless... u have to clean the analog sticks, not just the plastic.. u have to clean up those potentiometers... and be extremely careful, i came here to se if u were using some lube for those but u dont even open the controller... i mean... what were u thinking?
ОтветитьIsit good to use Electric contact cleaner spray on ps4 fan?
ОтветитьProbably has shares in them
Ответитьdatavac do not use canned air.
Ответитьdoes this work on xbox
ОтветитьGood sir I do not see any videos from you for cleaning or such of PS4 unless I am blind, therefore I am commenting here as the closest related I can find....
I was cleaning my PS4 Slim and I ran into bit of a jam...., I can't get the metal plate back in :( (The one that goes over the fan, heat sync too I think, and the disc drive...)
My issue is that it had this part that's not smooth so you gotta get it just right under. But the black plastic part I can't get it up enough to slide the plate back in :/
(Also concerned it might have actually had thermal paste inbetween that metal plate and the black plastic....I don't know what else this would be... >_<)
I'm afraid with the resistance it will snap and break if I put too much pressure trying to pry up that black plastic part in the back. I need it up juuust enough to get the plate back in and it's just not having any....
I had to take it apart to this degree as it really needed cleaning... The fan especially.
I just can't get the damn thing back together.
Any help is tremendously appreciated. thank you.
I'm so nervous of snapping that plastic because it feels like that's exactly what's going to happen....Break
Not used it, but bought some compressed air & wanted to watch some videos before trying it to avoid making any mistakes.
ОтветитьIs it same method with ps vita
ОтветитьGuilty as SIN
ОтветитьHey John how do you get the spots off the pad on the ps4 the little square pad above the joysticks
ОтветитьI would personally recommend disassembling the whole controller then there is no risk of blowing dirt deep into the controller but only do this if your confident enough to do it and make sure you watch tutorials on disassembling it
ОтветитьDidnt even watch the video. Hit subscribe simply for the guys name.
ОтветитьDo u think that if I blow hard enough into a straw it will do a similar job to the caned air?
ОтветитьJust rubbing alcohol? Can I use anything else if I don’t have it
ОтветитьI did it before and it made it worse , now I have to buy a new one
ОтветитьALL YOU NEED TO DO IS COVER YOURE CONTROLLERS UP SO DUST WONT GAIN ACCESS AND YOULL SEE EVEN AFTER KEEPING IT AS SAFE AS YOU POSSIBLY CAN. IT STILL CATHES DRIFT. THEERES A CATCH 22. THEY SEND A FREQUENCIE TO THE CONTROLLER THAT SHAPES THE OUPUTS. DONT BELIEVE ME. ITS FACT
ОтветитьWHY WONT PEOPLE WAKE TFU. DO YOU REALLY THINK THEY DONT KNOW HOW TO ADDRESS STICK DRIFT. ITS A CATCH 22 SO YOURE FORCED TO BUY NEW. COME ON PEOPLE. STOP. PLEASEE
Ответитьwhy would Blowing air in would fix stick drift?
ОтветитьNot going to hurt anything doing that, However, Its not Really going to help anything either. Now if you were to open the shell and blow directly into the mechanism and remove the hair and crud that tends to build up, You might help. Usually the issue lies in the potentiometers (2 per stick x and y axis) They also get gunked up over time, and can be carefully bent and opened up, cleaned with IPA and good as new. Its more involved and you run the risk of breaking something if you are not used to doing such things as cracking open electronics. It does save you a nice bit of money though, can even buy "broken" controllers from friends, and then clean them and resell them ;)
ОтветитьI've used the compressed air can before with the controller tooken apart. It worked finw afterwards...🤷🏿♂
Ответитьdoes water work cuz i aint got rubbin alcohol rn
Ответитьis there anything ti use beside rubbing alchohol
ОтветитьSo I'm the only one that drenches my controller in 100% alcohol
ОтветитьLol potentiometer wears out with use it's not the dirt though sometimes dirt can cause ghost movement but it's really the wear and tear inside the potentiometer,
ОтветитьFrom the first hour I buy a controller and drifted fro
ОтветитьI use hand sanitizer.
Ответитьthank you
Ответитьjust buy repair kit than the air that not 100% gunna work
ОтветитьI have the ps4 controller that came with the box and I never I had this problem I'm just watching with video to just have a recommendation just in case.
ОтветитьNope i am not dump
ОтветитьWhy are these so easy to break
Ответитьwhy use spray on a ps4 controller... i can understand a ps3 controller, that small ass controller.
ОтветитьI think it works even with the wrong equipment yall wil get a update today
Ответитьthanks my controler have stick drift
ОтветитьNow im wondering :
Why do people clean the outside of a thumbstick but not the censors
might be a weird question but will hand sanitiser work for the rubbing alcohol
ОтветитьDid this and somehow my start button stopped working, but it fixed the drift. Go figure...
Ответитьit worked maan thank you very much
Ответитьno
Ответить