This video will show you how to remove and replace the inlet valve on a Caroma Somerton or Caravaelle 2 piece toilet.
💧
Chapters
Watch the entire video, or jump to the section of interest.
0:00 Introduction
0:34 What you need
1:20 Turn off the water supply
1:34 Remove water from tank
2:00 Disconnect the water supply line
2:35 Unscrew the tank wing nuts and lift the tank off
3:28 Remove the old tank to bowl seal
3:36 Remove the water supply line
3:40 Unscrew the inlet valve nut below the tank, and lift out the valve from the top
3:45 Place the inlet valve in the tank and secure it
4:40 Put on the new tank to bowl seal and reconnect the water supply line
4:53 Place the tank on the bowl and secure the tank
5:12 Reconnect the supply line to the water & turn the water back on
5:22 Test the flush and you are done!
💧
NOTES:
•Whenever you remove the tank on a two piece toilet, you should replace the tank to bowl seal.
•Water supply lines can get brittle over time, making them vulnerable to leaking. If your supply line is showing any signs of wear and tear or appears brittle, it is important to replace it when doing toilet maintenance. (A leaking water supply line can cause significant water damage).
• Inlet valve and fill valve mean the same thing
• The inlet valves for these two toilet models look different, but they are installed exactly using the same method
💧
If you need help, please let us know! You can reach our team toll free at 1-800-460-7019 Monday to Friday from 8:00 am - 4:30 pm (Pacific time). Or, email us at [email protected]