DIY Rolling Walls LIKE A PRO!

Your tutorials are great! Questions: what if I’m doing the painting by myself…..should I use a paint extender to keep the cut-in portions wet until I get to the rolling? Do I need to go back over the brushed on cut- in areas with a small roller? If I’m painting a large span of wall, what size roller would you recommend? Thank you!!

What exactly is "laying out" the paint, where you roll over the already covered section? What does that do?

I’m older and don’t paint very fast. Should I cut in one side and half of the top and bottom edges, then roll, to maintain a wet edge? Then finish cutting and finish rolling?

I got a boss who zig zags his walls. Supposedly it shows less steaks but i never really tried it.

One coat coverage is bull for sure.

💯

This advice was really helpful. I painted a green feature wall and initially had lots of roller marks. I did another coat following the techniques you talk about here and it came out really well, virtually no roller marks.

Great vid man! Thank you so much. I understand where I go wrong now haha

Can you show me the best way make a distressed look on a door blending 3 colors ?

Tq for your tips. Help me a lot 👍

Jonh cena play splatoon now?!?!

Painting must pay well judging by those full arm cover tats … 💧

How long should I wait before I do the second coat of the paint? And if i mess up the first coat but i do a good job on the second coat, will the end result still be good? Thanks

Thank you for this tutorial! I watched it a couple of times before I painted and had great results with a Behr one-coat paint. You made this so much less intimidating and I appreciate it.

paint tray pros don't use paint trays

I am very excited to watch this. I have grand plans and not a lot of time. Thank you. I might actually try what is in my head because I have more confidence.

thanks bud

Please how can I get that roller??

GREATLY EXPLAINED ....THANK YOU SIR !

You can't see me !

ya bro behind ya like stfu man lets get to painting lol

I have always started from the bottom, because if you ever get a drip, it will happen going down, not up. The main rule is it doesn't matter what direction you go, what matters is up and down layoffs with minimal pressure.

What paint brand do you use most? Do you use flat sheen the most?

You are by far the best at explaining this out of the several guys I watched. Thank-you.

Thanks for these! Man, I’m a terrible painter but about to paint two walls in our house and this is super helpful!

hi, i get uneven roller marks/ patches up and down the wall? any tips?

Why not spray the wall with a graco

Informations job in usa

Dreams work penter in usu am algérienne zouai youcef tebessa morsott Aïd immigration

If your going with almost the same exact color, why not one coat if you cover it thick.

Забор

Is one gallon really enough for a regular bedroom?

Is one gallon really enough for a regular bedroom?

Nice coloration too. The walls look fairly smooth. Important to note: the roller needs to be a non-textured sponge. The feathery sponge rollers are more likely to leave textured paint on the wall. The more firm sponge roller will leave it looking smoother. I notice that nobody ever uses a squeegee roller, which definitely works best for evening wet paint.

I was hoping to find this comment 😂

Are you John Cena?

nice one mate 👍thanks

It's impossible to paint without lines. Lines are actually revealed if natural light hits the wall at an angle

I use the same roller. Love Purdy white dove 3/8 nap covers.

Thank you for the tips.

Great tips here but I can't see him.

Do you always make it a practice of using frog tape or did you guy use it for the purpose of DIY home owners???
Awesome job,I have learnt a great deal from your channel Chris 🙏🙏🙏GODS BLESSINGS

just a question why wen i use roller everytime i can feel there is small small tiny paints that is flashing into my face? is there something wrong with the roller or its me😅

Thank you for the tutorial.

Proper painter dosen't use tape mate!

So many terrible videos that people who have spent less than a week doing something in their life have made. This guys legit. Take it from a general contractor with 26 years experience.

You didn't really do a good job on that I mean when you rolling with the roller and you start in the middle you have to do something else I mean I'm not calling myself a pro but when it comes to painting I know how to feather things out and you should have feather that wall out that's why you getting those white spotted visible circles in your green paint because you didn't feather it out and when you roll with a roll brush and you start from the left to the right and you keep flipping your rollers the way you do you want to get it excessive paint on your rollers because you keep on dipping it in there every 9 minutes you don't have to do that all you have to do is put the primer paint on there make sure the first layer is any way you want to roll it now the second layer you have to come down and match the line if you don't match the line it's going to stand out with a bold face and you have to go back over it with a light touch just to kind of feather it out then once it dries it'll blends straight in and that's coming from someone that knows what they talking about

hey, so I cut my living room and accidentally let it dry, and havent rolled the walls yet, is there anytthing I can do to prevent/reduce and lap marks? maybe sanding the edges of the cut paint before rolling the wall? love the channel btw!

Someone should tell us how buying paint works where they live.
Here you basically go to a store, give them the paint colour and they mix it for you in about 2 minutes. If you need a lot, you order online or call ahead.
So if you're a noob like me, you can just say "I need to paint my ceiling, I would like this colour, can you recommend me a 10l?"
And they'll suggest a paint, you'll nod and say yes, and they make it for you and five minutes later you're out of the store.
Premixed colours is kind of... not a thing.