How to Remove Stumps Three Different Ways

Yes waffle is the best ideal good deal Neal and the other one ur wife

Thank s dude u just made my day I cut mine like the third one and put kerosene on it and and diesel I had nine two big one about 6 feet around pine trees about 150 feet tall big trees thanks dude it work s tell ur wife to keep on stand by becsuse two brains r better
Than one especially in the same house u hi old U Digg

1) Drill the vertical hole first. Then fill it with gasoline or kerosene and leave it to soak in for a day or two. 2) Then drill bigger horizontal holes and light it up.

This was a complete waste of time

Don't block the air holes, besides you are missing the point. It's not about a fast burn, it's about smolder

That's not a lake

Thanks
But if you bracite area by metal sheet is better

After seeing this again, instead of the soaked rags, light a road flare and put it in (flame first) into 1 or 2 of the holes only. They will continue to burn and the center hole will act as a chimney.

Kind of close to all the dry grass

Has everything to do with the amount of surface area exposed to flame. Some naivety in the approach, but interesting approach. Bore cut with that chainsaw to open up the lower air path for keeping the fire going.

Why don't you use the chainsaw to plunge into the top and go around to take the center out and start the fire in the center with holes in the side?

I would have cleared that brush and raked all the debris up at least 3 feet in all directions. Especially when you used the blower.

What about the roots???

NEVER STOP BLOWING!!!!!😂😂😂😂

All good if the stumps were dry.... can't tell by guessing how much residual moisture is still in the stump. Gotta put a moisture meter on it to get a good idea where you are.

Drill method needed 4 vertical holes. That stump is way too big for the single hole method.

Why don't you cut the stumps lower to the ground?

Def waffle and the cross cut for sure. Thanks for the video. Wish I could burn. Thinking of renting a grinder. Have 7 fairly large stumps.
Have any real good videos of using a rental grinder? Point to me some? Ty.

I got good at digging out about 4" below the ground before burning. Did a pecan tree with a hair dryer to blow air in at the bottom. Worked fine til it melted a sprinkler line. Pretty funny way to fail.

more like ''three different ways to not remove a stump'' lmao.