Radiomaster TX16s Mk.II: Overview of the what has changed on the newly released update

So, you can run spectrum receivers and all sorts of other stuff on these? I just don’t want to be stuck to one bran when spectrum is so expensive with receivers.

Hi guys, i wanna see the drone's camera via my computer. Do you know how can i do this with this controller

I get a mark 1 yesterday for 200€ with a crossfire module that öittle improvements are not worth it for me to pay 80 euro more its my first controller to try out this hobby. So its okay. If i need more i can build it out myself

hi! i have v1, it's possible to build a colours set of spare parts of v2 on v1??? the form factor it's the same also in this set of components? thanks

Hello, it's been another year since the TX16S MkII has been with us. I'm planning to buy it, but I'm hesitant to wait for its successor. The question is if there will be one and when.

either you or Joshua couldnt get custom color aluminiums?? is radiomaster so big firma?

I'm going to purchase the Ag01 gimbals after watching your video's. You have been extremely helpful to me and im sure many others. Thank you

Nice vid, I updated mine to Edge TX but the touch screen didn't work , I have two speakers in my unit but my jog wheels is plastic. Do I have the SE model ?

I made the mistake of purchasing a Jumper T18pro V2 and within 6 months, the right gimbal began to loose calibration. All my quads wanted to roll right and pitch down. I have recalibrated several times and it only lasts for a couple of uses and goes out again. I can find no replacement gimbals from Jumper. Everyone is out so I am switching to the TX16S.

…to big…and…fancy touch screen…if you are sitting on your sofa in a dim lit room…sold and two zorro instead…

Great update - I was considering purchasing a used TX-16 first gen and this cleared up the differences. FYI, there are a few 3D printed shoulder switch replacements and folding handles hat you may like. Printables has a few and Thingverse does as well.

It says 16 channel but they stopped making 16 channel recievers so what good is the radio. A bit misleading if you ask me

I'd been out of the hobby for some time and just looking at new equipment. This TX looks super nice. I've got an old Deviation TX I hacked and soldered, never really trusted it much. Faith in own soldering? Meh. Baked in 4in1 is nice.

Apparently there is a new IPS LCD out and I’d believe it’s a part of a MKII version but you haven’t even mentioned it - shall I assume that the difference is negligible that barely anyone can even spot it?

What is the best receiver for Radiomaster TX16 ?

Which version of Radiomaster Tx16s mk2 do you recommend?

No one mentions the charging process! What lights do you see and what do they mean? It's a big secret. I've had many different radios and they all describe the charge process except Radiomaster and all the YTube experts!!

Hello, I am having an issue with my radio master mk2 set up, I cant seem to find a radio set up video for it regarding any of the kopilot products, just videos involving inav or betaflight. I have a zohd 250g dart and I can bind it get everything working properly but the stabilization I cant seem to figure out how to set the three modes to one or any switch. It worked fine on my flysky transmitter but that broke so I upgraded to the radiomaster. Any tips or tricks would be appreciated!

If you do a follow up video any plans for reviewing the Max model version?

Sir , you mentioned this model ( i also have this Mark 11 model ) shipped with a SD card and the files installed ..... mine didn't . Can you give me a link as to where to get these files. I went to github and downloaded what i thought were the right( and latest ) but all the files were readme files FOR the files ...... very frustrated in Louisville , KY .

Picked the tx16 mk2 with the AG01s and multi protocol. Will just be in the sims for some time but plan to add the 1w 2.4ghz ELRS module when it comes time to build a drone. Keen to get stuck in to FPV

Question: Can you set these up with the DJI Avata or anything other DJI drones?

The battery door isn't any easier to access if you run the full sized CRSF on the back. They should have put that release tab on the bottom of the cover.

Although I do watch your tubes quite a lot of it is over my head, where should I go to get a beginners guide? As a ps you did teach me to fly a helicopter though now I just do drones

I just bought one and the volume even when turned to 100 percent is hard to hear compared to my older Tx16s. Have you heard about this?

You say the gimbals are better, but compared to what? The base model V1 gimbals? The V1 Hall Sensor gimbals? I have the V1 with Hall... is the new one better or equivalent?

The lack of readable labeling on the side buttons is my main gripe with the TX16S. How they could not correct that on this update is beyond me....

Can the orignal tx16s from aprox 2 years ago work with frsky access receivers such as R8 Pro or will only the tx16s v2 only communicate with them. If so I think frsky have really shafted the users, hopefully not.

It would have been really nice if Radiomaster had put a couple of 5.8ghz receivers in there and the option to view a Diversity FPV transmission directly in the controller itself. Maybe in the near future!

Hi Lee,
Great review and much appreciated. 👍 
New to RC Flying and looking to buy ELRS version of this Radio and after some training have a Spitfire that I'm getting ready with FPV for kicks. 
Have seen your other videos on Head-tracking setups and these are absolutely brilliant!  
Q? are you aware of any ELRS receivers that have enough channels to support Fixed Wing Requirements W/Landing Gear & HT?  
Best regards from Australia.

Hi, just purchased a tx16 mk2 with edge, can you please tell me how to set up a V tail glider on edge or where I can find more info on how to do a V tail set up, thanks in advance, windcheetah

ELRS or Crossfire ? Are the both analog ? Which is more capable for distance ?

Thank you so much for this review. It gave me the confidence I needed to move from my 12 year old DX8 to the Radiomaster. Anxiously sitting by the gate awaiting it's arrival here in South Africa.😳 Been wanting to give up my spektrum due to the 4+Chanel Rx's now costing over a R1000.00(ea.)

Hi.
I like your channel as you explain everything in simple terms but I am having trouble with my radiomaster TX16S mk2. I was using Jumper T16 with open tx and thought I would go over to edge to so bought the latest TX16S but for some reason I cannot bind it to any Rx.
I am trying to bind to Frsky RX8R pro.I set internal module, Frsky D16 protocol, press bind, hold down button on rx and connect battery. The red led comes on so does the green and the chirping stops on the tx. Restart both and the rx led is slowly flashing red meaning signal lost. I have tired to bind a Turing year rx and a jumper rx and none will bind. Am I missing something.
Paul.

Honest review,
As you mentioned I would like them to make a little more transmitter
Small in size, in my opinion the tx16s is too big and the tx12 is too small something between tx12 and tx16s in size would be nice.

Do you think dragonlink and radiomaster tx16s mark II can be used together?

great effort....congratulations.I want to ask something. What is the bluetooth status on this remote? In the old version, it could be used by adding it with a module. I think they canceled the module location in the new version. How can a solution be found?

Great job Lee! I still have my Horus x10s which I use for those planes with matching RX. My main driver is the RM tx16s/ CRSF. I am porting over to ExpressLRS with both very soon.

Would like to know how to get it to read engine temp and RPM. I can not fine a thing about it.

Do we know the release date in the UK ?

I have a request to show us how to set those tensions with those updated gimbals. I bought old ver but fortunately with upgraded gimbals se well. But how to set them?

Thanks for the real review. Your grades are real. Just like each of us has an impression when using it.



BTW. When I read some of the comments, I am reminded of my first radio that still had mechanical trimmers. And the receiver had to be tuned every few months. that I will not mention the over-meter antenna for 27 MHz and the need to replace the quartz for a specific radio channel ...

Now people can complaining because the LED is blinking 3x and not 4x. Really???

Even the best radio on the world will not make us better pilots. Maybe that's why I'm still pretty mach resistant to all these "important improvements".

"Give me the door with the motor attached, and I'll fly too." This is my motto;)

Hello there Lee, good video above.
William down in South Africa here.
Looking for some help if possible.
My TX16s Version 1 has suddenly started putting in some positive and negative elevator input when the throttle stick is used (Mode 2, so separate sticks).
It is right across all models, and even does it in the calibration exercise.
Any thoughts or experience on what to do?
Cheers,
William

Why do TX manufacturers normally place the screen below the gimbals? Placements like on the Frisky X20 or Rasiomaster Zorro seem so much better.

I like the form factor of the TX16S - For compact and travelling I use the TX12 (waiting for the TX12 upgraded gimbals to release)

Does it have bluetooth module?

What about the sugnal range for airplanes?

HI LEE - SURELY THE SMALER VERSION OF THE TX16S IS THE TX12 ?? - AND I AGREEWITH YOU ABOUT THE SLIDERS - I PREFER THE FRSKY X9 PLUS FOR FLYING ASTHE SIDE SLIDERS ARE PERFECT FOR FLAPS / SLOILERS / CROW BRAKING - MAYBE WE WILL HAVE TO WAIT FOR MK 3 - BUT I THINK RADIOMASTER ARE FALLING BEHIND DESIGN - LOOK AT THE FRSKY TANDEM OR THE TOP OF THE RANGE FLYSKY - THE MK 11 - DOESNT REALLY HAVE THAT MUCH OF AN IMPROVEMENT - CATCH YOU LATER - TAKE CARE - HAPPY FLYING - DAVID