FLSUN V400 Runs Circles Around The Competition - Delta 3d Printer

I am here from VOXELPLA, if you need any assistance please let me know.

Hi. Did anyone try PA on this thing?

its giant oml

I remember a few years ago when I mentioned the flsun qq-s pro and you said "most people use enders type printers so you wouldn't be looking at deltas. How things have changed…

I grabbed a K1 and a K1 Max last week. The Max is great, but as expected the small boy is frustrating me with hardware issues. I'm headed to return/exchange the K1. My question is do i get another one or get the V400 in its place? Any feedback would be great

You're a wizard.. ;)

I need that profile for the tpu please!!

how fast would you do PETG on it?

I have a problem with my flsun v400 stopping after printing about 5 minutes. It has a message that says klipper has shit down. Have you ran into this issue?

Could you do a comparison between the v400 and Bambu p1p? In many markets the v400 is hovering near the $750 range so they're definitely cost rivals and being two of the fastest printers on the market, would be interesting to see actual prints from both.

That sounds believe it or not is actually the stepper motors at certain speeds. The one that sounds like it's grinding on the print. If it was actually grinding that hard it would yank the print. Gyroid just changes the actual speed that the motors can move so kinda knocks the sound out

One question, I need to print large format pieces where print quality doesn't matter much, but time is pressing, I'm between the elegoo neptune 3 max and this one. Bearing in mind that this one may require sectioning off larger pieces and waiting for the glue to dry when joining them, I'll still be able to get my pieces faster with this one than waiting for it to print in one piece in the elegoo even if it has a .8 mm extruder? Thanks in advance for your time

The SR was a shorter machine and spool mounted on the top as well.

Can the FL V400 head be retrofitted to the Super Racer. I hate remote extruder drives for several annoying reasons. also if anyone knows what filament I should try that won't shrink if it got exposed to 120 degrees. My parts are shrinking significantly if they are left in a car or at ambient temperatures at 120 or higher.

Spritz of silicone spray in a tube/extrusion usually makes pulling wires through it rather effortless....

Just got my v400 (upgrade to my QQS-pro).
Cura 5.3 comes with v400 profiles.

Hello 3D-printer fans!

Can you make 3D items strong enough - like a chair? What are some real and practical examples/ solutions of the use of a 3D-printer?

I´m silly interested in tools - I know zero about 3D-printing. Should I get one?

Je n'ai eu AUCUN problème pour passer les cables dans le profil alu. Peut etre je suis super doué ?.

Good to see anyone’s making delta’s. They SHOULD be in the game.

I stopped playing video games because of all the warring and toxicity. I just got into 3d printing recently and holy hell I should've stuck with gaming...

What is there so much hate for delta printers?

😅 I guess we will see if I'm classified as an absolute giant 😉 can't wait to buy my own V400!! Love my super racer and I am such a fan girl of my first delta printer that has blown away my other Ender printer by leaps and bounds!! Thanks for this review 👍

I want to share my experience with buying from their website. They sent me wrong printer from german warehouse - Anycubic M3 instead of Super Racer. I contacted them, they told me to send it back, that they will pay for shipping. I send it back and guess what happened, they stopped responding to my emails :D No money and no printer.
So Be careful buying directly from them.

The truth about the flsun v400....(or better, about flsun itself)
Bought a unit mid january
Have it for several weeks
Unable to extract one single good print from the machine
The issue is that the effector keeps on blocking for whatever reason.
I constantly have to unload/load filament to temporarily fix the issue.
Very frustrating.
Contacted flsun.
"Please watch this video"

No support.
No help.
No nothing.

Considering filing an official complaint, this has all the hallmarks of a ripoff.

Do not do business with these people, hey clearly do not give a fuck about their customers.

Why does almost every one of these show that red error message on the lower left corner of the screen (mine included)? My printer runs perfectly, but that error message "klipper has disconnected" persist and I haven't found a useful solution online. Nearly every review video shows the same error, even the displays at MicroCenter showed it.

I just got my V400, and I must say, it's great that someone finally made a serious, no compromises, delta! The delta is really a great platform, but it really requires a first rate effort to be made for it to shine, and not to be a nightmare.

Hello, I see an X1C behind, we are a 3d printing company mainly using HP/EOS/Stratasys/3DSystems but need a "toy" FDM mainly for making gifts for customers and some low cost prototypes, which one do you like the most only for print quality? I don't care about speed, I do care about multi color so skip this part, I just want to know about print quality and surface finish, thanks!

Can you share your profiles please

Not gonna lie the easiest part for me was feeding the cables through it lol

Great video this loons fun

No enclosure, no panels, so it's 300C are pretty much not useful. The form factor is also problematic compared to CoreXY printers.
Price: too much, and you need to still assemble it yourself. Sorry , no.

Great review.

It’s funny cause I was able to just push the whole cable through the Y axis extrusion on its own without needing any string to pull it. Took me all of 20 seconds lol

i had the exact same problem with the wire😂😂

Flsun prusa or bambu what the consensus

Morning can you run calibrations With kipper without a 3rd party host ( protoface repetier etc)

When did “price” become “price point”?

Why say lot word when few word do trick?

This or bambu x1?

Great review! This looks like a fantastic printer! Thanks for sharing!

Just a quick PSA regarding the FLSUN company..Like the rest of you, I have 1 email from them, the one with the order number confirmation. No responses to inquiries, no internal notification of delays, radio silence. Until the day my bank placed the funds back in my acct, pending dispute, That day, I received my second email.Hello, I see you want to return your order, we are very sorry for the late delivery, our factory failed to deliver the goods in time due to the impact of the epidemic. Now your goods are on the way to the overseas warehouse, your order was shipped by sea, and it is currently on the sea, we do not have the logistics number for the moment, we can only have the logistics number when the goods arrive at the destination. We will send them to you as soon as we arrive. We will also give you some gifts. Is that OK with you?Best regards
FLSUN Service team.
 I have finalized my refund, they dragged that out 38 days after this with another vague free gifts no tracking.YMMV

Love that package!

Garbage company doesn't ship printer or respond to us.

I dont like a round build plate... building things with straight squared , rectangular features are the best way to build anything.... STRAIGHT NOT ROUND.

Do you think you could use the print head from a V400 on a SR?

I wish I could buy this model from Amazon

Hey great vid! What did you end up coming up with for a solution to mount the touch screen to the rail??

Hello men! Could you please share your cura profiles? I'm planning to buy one of this printers and would like to have some for when it arrives!
Thanks!

We ordered it last month and it should have been sent by November 10th, but we never got any update and they are not responding on any platform not chat or any email. It has been more than a week and we are very worried. 
Anyone ordered in October and never got the printer and FLSUN is ghosting you?

Edit: somewhat resolved*
Any idea what is going on with Flsun? I ordered the V400 on Sept 15 because I liked how it looked in this video. They charged my account at the time, there hasn't been any contact from the company other than "here is your receipt, we'll contact you with tracking info". A few weeks ago I replied to the email asking for details and the email no longer exists. So I tried the website's live chat, no response after 20 minutes and the banner says they respond in a few minutes. So last week I checked the website again and sat on live chat for an hour, no response. Emailed their contact support email from the webpage, which apparently does still exist since it didn't bounce back.
But still no response. The product page doesn't even reference my shipping wave anymore. I am strongly leaning toward this company being a scam at this point.

*Edit: sitting on their livechat I clicked view older messages to see if they have time stamps (they don't), and it looks like they responded here... when I wasn't connected. They linked to an 'update shipping' on their webpage, which says I should expect delivery second week of December . It would have been REALLY NICE IF THAT WAS AN EMAIL as that was what I was told to expect on the receipt page. Regardless, the store page saying 12-16 days by air is super misleading as I took that as 12-16 days from the 'shipped from factory' date, not a month after that.