Jun Zeng's Hall Effect Sticks - PS5/Xbox Installation & Calibration

How many watts is your desoldering gun? Seems to work like a charm. Found one on amazon, looks exactly the same, but only 40w, sounds weak compared to what you're showing.

This is a step forward, but I don't think I'm willing to do something like this. I've soldered a few things and fuxed a few consoles, but I believe this is still too much for me.

Please update the first link with Jun Module ( With Calibration Board )

A vid on the Jun Zeng modules in the Xbox elite series 2 controller would be great. Thnx

gosh its so hard for me connecting the middle thingys with the pcb and then bridging them in the next step aaaaahhhh
my solder neeeded "hours" to stick to the green PS5 pcb

maybe I preconnect the bridge wire for the second analog stick, before sticking it through, idk fml xD

I want to doublecheck something.

Are the Jun Zheng PS5 hall effect kits compatible with the Extremerate Rise 4 remappable back button kits?

I've got a PS5 BDM-010 controller which I'm modding for a friend.

I've ordered the Jun Zheng PS5 hall effect kits back in October, but have yet to fit them. I've also got the extremerate rise4 metal back button remap kit which I'm also planning on fitting.

Are the Jun Zheng hall effect kits fully compatible with the extremerate BDM-010 Rise 4 kits? Eg, will the power draw from the Dualsense, the Jun Zheng hall effect kit, and the extremerate back button kit all work nicely together?

Will it all work normally even on low battery whilst wireless? Or how about under massive stress testing eg. whilst you're wireless and on low battery + you've plugged in headphones&mic +/- using the controller speaker + using the adaptive triggers + vibrate + touch pad + max LED brightness + sixaxis?

I don't know how to correctly figure out the power draw from the extremerate Rise4 back button kit, and I haven't found much info about compatibility between these parts upon reading online just yet.


The main reason I ask is because an older extremerate Lofty back button kit I fitted on my xbox one controller (in 2021) used to malfunction at low battery level. I use the white rechargeable Eneloops which are rated with the lower 1.2A per AA rather than the standard 1.5A seen on disposable alkaline AA batteries.

yooo that is so sick, way better than the analog ones where you have two screws

can the calibration board still used with an orange hall stick?

you suck at soldering, man

Hey just wanted to say desolder pumps are cool in all but ripped pads from heat damage are not

Use low temp chip removal solder stuff is a life saver and will work on the sticks I've removed them with it myself and recommend this over all removal methods as it's the safest for the board and pads for the experience


Use solder wick to roughly absorb most of the original solder then let it cool down add some Flux and go to town with the low temp solder just hardly touching it after its melted in and then work the stick with a cloth padded screw driver spudger and best of all a wooden stick and they pop right out every time safe and sound



High temp solder temp solder removal tools are nice but if ur unexpierenced it could be an easy disaster so I hope this saved a few boards out there 🙏

Gulikit said they're making Hall sticks right? Maybe they can make em just right
(or not 🤷 )

Does the hall effect magnets get affected by the magnets on the thumbsticks on Xbox Elite controllers? Make that vid

I don't think the gap on the ps5 is because of the board. They really don't come anywhere near the plastic case. I've put these boards in two of my controllers and neither has a gap. I think your gap is caused by not putting back the little white clips on either side of the charging pads when you reassembled.

Also if you don't have a vacuum desoldering pump, it's easy to remove these sticks with a cheap heat gun.

Before heating, add some solder to each joint. The mixing of fresh soldering wire with the factory solder will lower the melting point.

Then mask off the board with aluminum foil to avoid melting any plastic. Gently heat the back side of the joystick until the solder gets wet. Careful not to use too much heat, even with the foil you can ruin a board by melting the ribbon connector ports. Keep only the one area hot. Gently tub on the analog stick from below with a pliers as it heats up and eventually it will just pull out.

Now you can do any cleanup with some cheap solder wick and your iron, or you can use a cheap manual solder pump to clean it out. Just keep the area hot with the heat gun and pump away the last little bits with your hand pump.

Heat gun + solder pump + wick is a hell of a lot less expensive than a vacuum desoldering tool. Just takes longer.

Can we install that on an Xbox Elite Controller ?

I went on Ali to buy some hall effect sticks and a soldering iron. Not sure if the ones I bought wete good. But I needed a cheap soldering iron for some projects and managed to score one for 0.45 euro (Ali keeps offering me insane deals, they called it newcomer deals or something but when I logged it it was still the same price. I think it's because I used to order a lot there and haven't ordered anything in the past year or two. Was planning to get some optical yellow gateron switches for the old gk61 I've got laying around since I started using mouse and keyboard for warzone due to every controller starting to drift after a while. And I play on super high sens so drift makes it really hard to be accurate.)

Ps the soldering iron comes with a bunch of tips, solder etc etc. basically everything you need for a simpel project. So I guess I'm finally fixing my JBL charge 3 that's been broken for a few years now (fell down a flight of stairs, think a cable went loose)

Do I have to use the sticks and boards together? I'm asking because I bought Hall effect sticks from another manufacturer before I knew these were available. So I just bought the boards since I already had the sticks. I can't seem to get into calibration mode.

Omg this is terrible!

Very nice video and informative - as the other ones on your channel. Big thank you!
Do think the Jun Module would work with a Nintendo Pro controller? I'm very curious about this option.

Can you try these on DualSense Edge stick modules?

Somehow this video is a better instruction than both Jun Zheng's "detail" videos, you two show cooperate :-)

bro i want ask u can Calibration damage the board ?? after i install it "hall effect" i heard some noise from the main board "xbox" u know like spark sound "when i Calibrate" and the on the chip overheated , whatever with battery or usb cable and shutdown the controler

What desoldering iron machine do you use ?

Big ugly mess, installing a modship for Nintendo switch is easier than that, they should make an easier PCB

Ordered mine in november 15, I'm waiting it arrives, but the gap in the DualSense shell is a new information for me, not mentioned in the seller description or in the reviews... Sad... I don't want to cut my battery older... However nice video thanks 👍

Ok, but u should test this thing in game too, the values in gamepad-tester is not fully trusted, are you heard about new version of orange module, it call v3, and it non jittering at all, even with out extra pcb it show very good point in gamepad-tester, BUT when people using it in game, it is freaking over smooth, in extremely bad way, and delay so hard

VK you don't know if this will work for the elite series 2 controller do you? I would assume it would.

Please make Review of vetop Zeus 2... I buy two of them ... For me is the ultimate controll ... Many funcions and AMAZING construction..

@VKsChannel There is supposedly a newer orange enhanced 3.0 version that has no jitter (even though the console filters it out anyway). Aliexpress item 3256806013522128 my order comes in December so I will see how well they work.

i ordered these and it said it was going to be delivered in 2024 do you think it will take that long? (im in the US)

So only experienced electricians can play games properly.

I've read that the orange one is overall better compared to the blue one, could you maybe try soldering one and compare it with the blue? It should be compatible.

Because I'm so tired of carbon potentiometers I ended up buying a gamesir G7 SE, but since I know how to solder decently. i'm actually down to do all this to my old elite 1 controller. I just needed this video to attempt it.

I wonder if the Xbox mod would work on the Elite series 2.

All I'm waiting for is a chitu hd like controller with better gyro and wireless latency, it feels like every controller on the market is an xbox shape controller which I despise

That trigger hitting the board and the gap on the ps5 controller is terrible. Plus the unnecessary hard way to install. Why didnt this dude just add a small board to the sticks itself. Goddamn

Could only the Azul be installed without the correction plate?

Very Hardwork ❤

Hmm, the flexibility that it adds to the sticks (config center point, and range, etc.) is awesome to have. BUT.. There are some BUTTS..
How's the latency.. (of course, that question only applies to setups which would enable this to be a quantifiable metric.. as in, not on a console for ex. ) ?
I assume the jitter filtering (buffer and processing) alone would be the one factor that would make zero latency an impossibility to begin with.
I also do assume that these little PCA's would work perfectly fine on the standard/original pots, enabling you with all of the extra setup (although.. at the cost of the added latency!. )
Other than this, I find that the back case of the DualSense not properly sitting after the mod is unacceptable (maybe a newer revision on a Flex PCB would fix this in the future.. )
Maybe that newer revision could even come with a switch to turn the jitter filtering off (removing the added latency) in order to use with the original pots..

Thank you for the good vid. It looks a little tricky to install and more difficult to reinstall. I expect a product that is easier to install. Will ms and sony put hall sensors in the next generation of controllers? So far, it seems very negative.

hola buen video,de que pais eres?
cuano tiempo tardó tu pedido en llegarte?

Thanks for the video, was waiting for Greg's Gaming video on these but it seem it will never comes out.

As much as I like diy, this is look like a pain for the average person like me and I doubt there will be shop that willing to do it here since they all sucks (we don't have console culture here). Guess I will rely on third party like 8bido or gamsir and pray sony will have first party hall stick soon