4-Stroke 38cc Friction Drive Motor Bicycle Engine Kit Installation | The Flying Horse Lock-n-Load

4-Stroke 38cc Friction Drive Motor Bicycle Engine Kit Installation | The Flying Horse Lock-n-Load

BikeBerrycom

9 лет назад

2,322,791 Просмотров

Ссылки и html тэги не поддерживаются


Комментарии:

@JackJohnson-xd2ln
@JackJohnson-xd2ln - 29.11.2023 18:38

Will this fit on a kids 16 inch bike?

Ответить
@laerthedacruz7809
@laerthedacruz7809 - 26.11.2023 16:54

people are concerned about the wear of the rear tire, which is not true, the 49, 52 and 63cc engines of the brushcutter type are engines with an automatic clutch, which is driven by a centrifugal system, which prevents tire wear in the acceleration and reduction, the automatic clutch causes the wheel shaft that touches the tire after you pedal the bike to be activated by gentle acceleration until reaching maximum speed without wanting the mechanical system in contact with the tire, slipping. .. engines with automatic clutch type of brush cutter is the most recommended and approved.

Ответить
@dcee366
@dcee366 - 10.11.2023 18:12

Do they still sell these motors?

Ответить
@chaz-xc9st
@chaz-xc9st - 29.09.2023 16:23

Wat about carrera vengance

Ответить
@bscatbui
@bscatbui - 11.09.2023 12:08

Dear Sir
I'm from Viet Nam, i would like to buy one kit, how about shipping cost?

Ответить
@fast-rich
@fast-rich - 14.08.2023 14:32

Good very good

Ответить
@shamelllindow6289
@shamelllindow6289 - 04.08.2023 17:01

Its a neat set up .....i feel chain drive works better

Ответить
@ajskustom
@ajskustom - 02.08.2023 20:51

I love this kit it was the first BikeBerry engine I started with and I custom mounted it on a 26 inch mountain bike with
suspension front and rear it was a really nice and EZ kit for me to start with and then my daughter got it stolen
man was it the coolest bike I may build another one some day but what I have now is build 3 of the OCC chopper bike I
would like to submit a video of it for you to see and show it off a lil bit 49 cc all stock engine I'm breaking in slowly
let me know if you want to see my bike in a video and if you do I will make a video today.

Ответить
@kellyagri3224
@kellyagri3224 - 03.07.2023 00:39

Can you get these in 2 strokes

Ответить
@ihopcsx
@ihopcsx - 22.06.2023 05:27

Off center weight

Ответить
@ihopcsx
@ihopcsx - 22.06.2023 05:26

Wont that eat the tire?

Ответить
@ihopcsx
@ihopcsx - 22.06.2023 05:25

You gave me an idea

Ответить
@seanbarrasin9441
@seanbarrasin9441 - 15.06.2023 03:50

yeah ok then get done for rideing it on the road

Ответить
@brianpelletier4927
@brianpelletier4927 - 12.06.2023 04:43

Wrong oil 😅

Ответить
@huffyRedline
@huffyRedline - 24.05.2023 09:05

in the first oil how much did you put in > 4 oz ?

Ответить
@aidenfarias
@aidenfarias - 20.04.2023 03:20

Can you send me the link to that to buy the engine?

Ответить
@carlosfalu-uh9nx
@carlosfalu-uh9nx - 18.04.2023 01:26

Excelente gracias ☺️👌

Ответить
@noreen5435
@noreen5435 - 27.03.2023 00:11

How much would the cost be to order all items except the engine as I have access to Honda gx 35 as I'm a technician at a industrial equipment sales and service place

Ответить
@derrickclark5510
@derrickclark5510 - 17.03.2023 04:06

What type of engine?

Ответить
@burthabard8316
@burthabard8316 - 16.02.2023 22:33

A French solo used a semi solid tyre think they still make the tyre

Ответить
@whywouldicare8618
@whywouldicare8618 - 10.02.2023 23:36

Ahah mine won’t start and idk what’s wrong

Ответить
@keithgordon3314
@keithgordon3314 - 02.02.2023 02:09

I've ordered one time from BikeBerry. Spent almost $300. I was sent a 49cc Lock and Load engine kit....missing crucial pieces. Like the Stilts. The gas cap. Extra Fuel line I paid for. As well as multiple bolts, washers, and spacers to mount the engine AND to assemble the brackets. After receiving SOME of my missing parts in a second shipment, I STILL have yet to get the bolts and washers that were missing. A 3rd shipment is on the way to rectify my original order but I've seen in my email that it's STILLLLLL not all my missing bolts, washers, and spacers!!! I'm NOW going to have to hassle BikeBerry 4 a 4th shipment...which will HOPEFULLY FINALLY have my remaining bolts, washers, and spacers. Very, VERY disappointing experience thus far.

Ответить
@ouchcubic
@ouchcubic - 05.01.2023 11:03

i need a 4 stroke friction for an adult trike

Ответить
@skynjaydensdaddy
@skynjaydensdaddy - 21.12.2022 15:19

Box cutter to cut off the current handle bar? 🤔

Ответить
@thibui765
@thibui765 - 09.11.2022 07:17

Thanks for sharing your video clip…
🙏🥰👍

Ответить
@jesusofchinesia
@jesusofchinesia - 08.11.2022 08:36

Their engines are a scam. You can get the exact same engine for hundreds of dollars cheaper on Amazon. Same company builds the engine. Don’t buy from bike berry

Ответить
@stephenblakey4913
@stephenblakey4913 - 03.11.2022 01:15

Could you fit it on a 28 inch wheel

Ответить
@johngoodin3445
@johngoodin3445 - 26.10.2022 01:07

I kinda remember a fiction drive with a motordirectly over the wheel. Does anyone remember ever seeing one of these. I also remember from Pawn Stars someone was selling a classic banana seat, bike with a friction drive on the front wheel.

Ответить
@mirlorojo3348
@mirlorojo3348 - 07.10.2022 04:52

Where is the intake air filter??

Ответить
@fish9905
@fish9905 - 05.10.2022 06:48

I have a 24" rear tire will it work?

Ответить
@richardschnedorf5711
@richardschnedorf5711 - 28.09.2022 03:25

Thanks for the information.

Ответить
@Hamann9631
@Hamann9631 - 14.08.2022 23:18

What is the top speed? Where I live I can add this if the top speed is a certain speed.

Ответить
@Angel-df2un
@Angel-df2un - 14.08.2022 05:18

I have a fat tire bike, 4" wide tire, can i use this kit ?

Ответить
@jackieadams3248
@jackieadams3248 - 26.06.2022 13:36

good day were can i buy one

Ответить
@jifchosehismother
@jifchosehismother - 16.06.2022 04:26

what is a millemeter?

Ответить
@jeepz669
@jeepz669 - 13.06.2022 13:41

Noooice

Ответить
@CurmudgeonExtraordinaire
@CurmudgeonExtraordinaire - 31.05.2022 11:05

That's not a wire stripper...

Ответить
@Gtothej5
@Gtothej5 - 03.05.2022 01:09

Would a 40-48cc motor work with an adult tricycle?

Ответить
@Laserwurks
@Laserwurks - 21.04.2022 21:15

Soldering the wires is best

Ответить
@Whether-Man
@Whether-Man - 21.04.2022 11:10

Super clever engineering

Ответить
@richardschnedorf5711
@richardschnedorf5711 - 21.04.2022 01:01

What about licensing requirements for this modification?

Ответить
@stevenleek1254
@stevenleek1254 - 20.04.2022 14:53

Great clip! The music, tho, is brutal

Ответить
@djf2918
@djf2918 - 28.03.2022 01:20

"QUESTION" ANYONE . . . I HAVE A NEW SCHWINN FROM 8 YRS AGO W/ A NEW SUBARU ROBIN 4 STROKE ENGINE, (8 YRS AGO W/ BELT DRIVE).. Only test driven.. WHATS IT WORTH IN THE S F EASTBAY?? Thanks in Advance.. a usvet

Ответить
@williamnorris9291
@williamnorris9291 - 27.03.2022 23:24

I wonder what the gasoline tank size is?

Ответить
@rickriddell9776
@rickriddell9776 - 11.03.2022 21:44

Will this enhance my chances of picking up a chick

Ответить
@mikepeppers5145
@mikepeppers5145 - 04.03.2022 04:33

Yeah that design. Well where the trade off your tires that why you tried to figure that out not to wear down the lifespan of your tire

Ответить
@mattDIY
@mattDIY - 01.03.2022 16:23

Good job

Ответить
@gaborkajdy7706
@gaborkajdy7706 - 14.02.2022 19:45

Eats up rear tires fast.

Ответить
@ianhale4466
@ianhale4466 - 09.02.2022 15:22

When will someone make a motor where the shaft faces the left side and have a sprocket on the left side and a 10 speed on the other side, the motor drives the pedal crank and the crank drives the wheels, that way you can still use the gears

Ответить
@jonnygarland4741
@jonnygarland4741 - 13.01.2022 23:21

Might be possible to put 2 engine's one engine on each side AND might not be possible for two engine's

Ответить