Klipperscreen - The Touchscreen Interface for Klipper

its doing bugger all on mine iv got a console screen and bugger all else

i'm building a voron 2.4 350mm and use a manta motherboard with mb1 to do the job of a pi. Can i install it on that configuration with your steps??

If I've installed Klipper on a old laptop, can Klipperscreen use the laptop's LCD screen and keyboard?

Can you do a video of connecting a display via Canbus?
(like a BIGTREETECH TFT35 SPI with the IO2CAN board ?)

I do the same on this video but klipperscreen not starting. On my screen see end of loading and bellow -->
Raspbian GNU/Linux 11 rpi tty1
rpi login:

Tried this with waveshare 4.3 and the display is ok but the touch isn't working. Any idea what I should look to? Thanks

Can I also install it on my stock screen that came with my Neptune 3 pro.

Any thoughts on whether or not this will work with the BTT Pico?

Hi , what are the spaces under the heat bed please?

Does this work with OctoPrint? Video tutorial?

Currently running klipperscreen however It will only work when I usb the pi into the skr2 I would like to do the 3 wire uart connection to the tft pins on the skr 2 but when I do this the web interface (mainsail) works just fine but klipperscreen won't do anything as a UI for controlling the printer can't find any literature on this at all

Yo. Nero you have a video on the Mini12864 display klipper setup?
Google isn't my friend in this case.

I installed Mainsail OS to my Raspberry and KlipperScreen along with it, everything works except the touchscreen, which worked under OctoPi...

I haven’t figured out how to like the smash button! 😂 thanks for the video though, looking to get this going on an old fire tablet I don’t use anymore

Tried so hard to find the smash button, but I failed. Maybe I will like it when I find it <3

Can the cameras be viewed on LAN without the mainsail/fluidd interface?
Is it possible get the url from crowsnest for cameras to be opened/viewed in OBS studio for recording/streaming

can be custom macros added to the screen menus?

Someone needs to design some mechanism where it's retracted into the printer vertically, you push the screen, mechanism unlocks, spring and slow-down mechanism nicely retracts the screen.
I believe it's something some of the desktop paper printers have.

Aluminium black anodised bezel would be nice too.
Lastly, not sure if it's a thing, but it could use some nice voron logo boot screen not the nasty OG RPI command prompt one, would make it look more professional.

what if your screen is upside down and no switch to flip it?

you can mount a tablet and acces over wifi mainsail so you have all your options as well, I normaly use my smartphone...

can I load a sd card with gcode and place it on the screen to print? or do I have to use the online upload?

I have purchased a FLSUN speeder pad and its always showing the same error as firmware issue, im unable to connect to my printer, i tried some solutions but none of them seem to work. Can you kindly help me out?

Hello. I have a manta m8p and cb1 as well as the pitft50. When I plug the pitft50 in to the manta board the cb1 won't boot. I see that the manta has power it click the bktouch on. I have tried flipping the ribbon cable around. Nothing seems to work I have tried putting the tft50 on my old pi 3b+ and I get a screen. When the tft is not plugged in to the manta board. Everything boots fine i can access it from the web. Just not with the pitft50 plugged in.

Hi, I am sourcing for a new voron 2.4 printer and I intend to leave it on the floor. Do you think it would be possible to mount the screen on top of the printer instead of where it is designed to be installed? I think it would be hard to operate the screen when it is so close to the floor.

Liar you're not using the btt tft50. You're using the btt Pitt 50. Which is completely different. You had my hopes up because I bought the tft50 to use with viron and flipper without checking first only to find out you can only run it in single marking mode.

CAN YOU INSTALL ONE ON THE MANTA BOARD ?

Hey, fantastic video. Do you know if it will work with a Bigtreetech TFT 35? Thanks.

Question - if you want to use a BTT50 like this - AND a rasp pi camera - how does that work with the cables?

This is great I just picked up one of these off amazon - I've been running back on fore to my PC for now since I built my voron. Cant wait to fit it!

Hello, do you think we can adapt the BIGTREETECH TFT70 with Thank you Klipperscreen

This is great info, thanks. I just picked up an old Ender 5 Plus and am planning on converting to a BTT Manta with a CB1. I already have a Pi TFT50 to pair up with it. Looking forward to diving into Klipper for the first time. 😊

Thanks for the video!
Unrelated Question: whats the filament used to print the left hand side printer with? (The orange/light blue printer)
Cheers

And if I have an Orange Pi 4 LTS - can I connect this display?

Hi mate, thanks for explaining this, but I'm a newbie and I'm wondering how does the raspberry PI actually tell the printer what to do? How does it connect?

I like that smash button :D

Could you let us know how to get klipperscreen to work with 2 printers I'm struggling to get them to work?

Hello good vidéo ici have problem the menu mouvement don't work but all thé rest work correctly do you already see this problem thanks

Any chance you can share the stl for this mount ?

I have the same display bit it only detects a resolution of 720x480 not the 800x480' and through config I cant set my desired res

Does the tft50 have a terminal input, so that you can send commands to the pi?

what size is that blue voron?

hey nero. what's is the modle of touchscreen ?

Since there is an absolute drought of RPis, have you looked into using a RockPi as an alternative? They allegedly are faster than RPi3s and have DSI connectors. And you can still get them for what you used to pay for a RPi in the good old days. The issued that reviewers had with the RockPi might just all be irrelevant when used to run Klipper.

i installed the same screen. The installation was riddled with problems, nothing worked just from installing the script .
after long time of troubleshooting i got it to display but for the life of me i can't get the touch to work .
The official troubleshooting guide was useless .

I have the btt 3.5 v3 screen atm can klipper screen run on that?

Could you add a link to the ribbon cable for TFT50. Maybe I missed it in the comments.