How to render faster with dual GPU - RTX3070's

No settings required just plug and play ?

can i use 3070 and 6700xt the same time?

Is this the same setup for mix GPUs?

Unfortunately, it is not possible as SLI technology is not supported anymore :/

Any new videos coming soon?

Sir is it possible to use two RTX 3070 with Ryzen 7 5700g with Motherboard Asus Tuf B550M (wifi)? I would like to use both GPU core in linux

These are the type of videos I have been looking for

thank you for the content I enjoy your videos just curious is the noise cancelling software quieting you down? your volume seems to fluxuate. i only notice because i usually view later at night and keep the volume down and then theres moments its hard to hear. very informative vids though. i am not fortunate enough for threadripper money but i have a 5900x and a proart b550. i was wondering if running a second 3070 would benefit me but im unsure as i use m2's what my pci lane availability is. i have a feeling it wouldnt get 16 lanes on both but maybe you have some insite?

Can I use two different brands gpu or different size of vram ? For example rtx 3070ti evga with rtx 3080 gigabyte.

would a PC Riser (for BTC mining) can be used? Thank you for the video.

Hi Mike, I have the same configuration PC. Present In my PC AMD graphics (5700) were installed. How can we install two different graphics cards?

Very interesting thanks

Hey! I recently made my setup with 3090 and 3080, using a 1300W PSU. The pc works fine but when i render my monitors go off and gives no signal. But the system doesnt shut down. What do you think it can be wrong?

here is a weird question. I have 2 x 3090s I am rendering an image and I noticed that my 2 buckets in Redshift renderer that one of the buckets renders slower than the other... One bucket moves quickly from section to section but the other bucket gets stuck on the section and renders slower. the one bucket will complete at least 5 buckets section while the other bucket will one complete only one bucket section....I also change the render pattern and it gets stuck no matter where the bucket is located on the image. Do you think that one of the cards is failing? how do you go about trouble shooting if there is an issue with the card?

i have assembled render machine (AMD Ryzen 9 5950X / RTX 3070 graphic card /RTX 3070 graphic card/ 64 GB RAM / 500 GB SSD) i am install 2 graphic card in my machine i want step by step procedure. and how to increase speed rendering in MAYA. so please share your experience and link how to install 2 graphic cards in one Machin which software be install in my machine how to configure my machine please please tell me

This is a good video especially considering that SLI has been discontinued with RTX 3000 seeies cards - but you use Arnold Render here....would this work without need for SLI with any GPU capable renderer like Blendet or Keyshot? Also, does video card memory stack with 2 GPUs? Ex: if you have 2 cards with 12GB video card memory, are you going to have 24 GB of memory to utilize in your rendering processes?

I think I know the answer, but would like to confirm before shelling out my company cash to improve my computer at work.

What was the motherboard you’re using? What are the important attributes we should look out for when also selecting a motherboard?

How the fuck this dude only has 5.5k suscribers? The info he provides is gold.

Great video! Noobie question: can you run a 3090 + 3080 or would they both need to be the same cards?

First Benchmark improvement 110 to 115%? ^^
More like about 101.5%. So this is in margin of error.

Hi Mike, do you think there's X570 mobo that I can fit 4 RTX 3080 blower style on? If there's one, will it perform better than say 4 RTX on TR4 ?

Can we place rtx3090 Asus ROG oc in lenevo thinkstation p920 bro plz reply

I5⏰4460 IT IS...IT IS ASUS TUBO GPU FOR PART TWO,AND LENOVO？I THING COMPUTER IN WORK

This was very helpful. I just gave a doubt. Do I need 2 exact gpu's for this to work? Will it work with a 3070 and a 2060?

Hey Mike, I'm new to this multiple GPU rendering. Do the GPUs need to be the same model? Can I use MSI rtx 3070 with Gigabyte rtx 3070? And how about a 3070 with a 3060? is it possible?

its amazing how much FUD is out there regarding a dual gpu

Thanks for the content I just subbed

hello, l'm looking msi unify mobo for my 3060ti and 2080 (both of them 3 slot). is it possible to fit and run?

Hey Mike, nice work. Just a quick question to you. I have a Ryzen 5950x and one rtx3090 and want to buy a second 3090. I work with c4d with octane render.
My CPU has 24 PCIE lanes, will it limit my render power with 2* 3090? If yes i have to upgrade my system to threadripper, because of more PCIE lanes, right?

Hey! I was looking into running 2 cards on a work computer as I had 2 970's laying around, as well as some spare parts. Was wondering if it would work the same way as this did with the cards I have, I've built an i7-4790k on an ASUS Z97-A board with the two 970's. Do I have to SLI them? Would they both run faster than just the single? Thanks so much! Video was very informative.

hey thank you the video was informative i wanted to know can two small card like gtx 1080 ti can outrun a 3060 or 3070 while high rendering or two 2060 against a 3070 or 3080
i am searching for these types of video but only found yours

Will running (2) k80's at the same time render faster?

Are multiple GPUs setups now able to share their VRAM pools?

Can you give us advice how the best setting Nvidia control panel for Cinema 4D and GPU rendering please ?

Great video. Best about explanation based on fact

hey Mike, will 2x 3070 outperform a 3090 on a threadripper 3970x, 128gb 3000 ram. im not going for the pro series cuz its expensive and its mother board too.. thank you so much for the reviews and info!

sir make a vedio for 3ds max full buget system configiration,,,,

Hello! Really really great video! I understand not much of Hardware, but I thought it was necessary SLI to run more than 1 Nvidi gpu! I use Blender for rendering, would I be able to run 2 RTX 3060 for Blender? Does it need something other than wattage and slots on the Mobo? Thank you in advance! The CPU is ryzen 9 3900x

Hi Mike, Thanks a lot for the video you have provided. It was really useful. I've bought MSI RTX3070 GPU few days ago and I'm going to build my system next week. I was very surprised that I can use 2nd GPU in further. Honestly, I thought it's impossible because RTX3000 doesn't support SLI connection any more(excluding RTX3090). So, can you explain what difference between SLI and the regular connection you have showed? By the way, I bought MSI Prestige Creation X570 Mother Board. Would it works with?

That is truly the current sweet spot for graphics right now ... now if we can only get our hands on one ... I mean two of them. Try Blender's cycles w/their demo files.

Hi Mike, it was a very informative video. I am wondering did you need to change any setting in the Nvidia control centre? And after you installed 2 cards, did you do anything to make your computer recognise it?

so thos fking dell they put for me 2 quadro m6000 24 G each next each other. so 2nd one will not get enough airflow .

Hi Mike, thanks a lot for amazing review!
I am thinking of buying Lenovo P620 workstation, and paring with 2 rtx 3070 cards. my question is will it be able to support power supply for Gigabyte OC version? as I have one already, thought I will make use of that one.

You can skip Arnold GPU, nobody uses Arnold for GPU rendering. Make the Arnold render test with threadripper and tell us the render time :D