A new Amiga Device that can run 3 different CPUs

Can’t I install the most recent amiga os on a regular pc build of today?

When do you chaps think youll have the aga section ready for release?
I like this board,

One other question, does it have any usb sockets on there?

I run a 1200 with os 3.1.4 and a friend accelerator i borrowed while he gets his board fixed or replaced

Chris,, THANK YOU for posting all of this amazing content. I just learned about the active Amiga community, and I'm blown away by all of the fun projects that are live. Now I'm looking for a 600 to tinker with.

Stupid nerd question: What would happen if you put the MiniMig MC68SEC000 processor on a real A500+ motherboard?

Board for $350 sorry no... $159 maybe....$99 yes.

just watching this and thinking, work in IT and often dispose of old pc's, does anyone do a bare metal amiga emulator. would an old i5/i7 be more powerful and cheaper than these brand new boards? lots of nice sff desktops with ssd's and lots of ram that get binned!! they also have vga\hdmi\dp.......

Wow! What an Amazing development they have done there. I'm very tempted on getting one, but I didn't see that it is possible to handle an Amiga floppy drive or is there a way to read my Amiga diskette on this setup? Would be happy to have a pointer to how to read my old 880kb Amiga FFS formatted diskette.

i'd like to have one in green. also, there is a purple one. now i just need moneys

$350 is too high for this hardware

Have you found out if this mini Meg will work with Apollo vampire, Firebird?

Hello Chris! Could you please share the firmware file minimig1.bin to run 1.97 with 68000 cpu? Thanks!

Problem that 68k is not produced.. This board emulating 68k?

I picked up a new MiniMig 1.97 after watching this vid. It works great with the shipped CPU. Unfortunately I can't get the PiStorm to boot Emu68 with either a Pi3A or a Zero 2 W. (Both are known good and boot Debian fine from different SD cards.) I get yellow screens in a loop all day. I can see the grey Emu68 screen over HDMI but it's just borked. I'll need to do more troubleshooting it seems.

Looking forward to maybe a 2.x with maxed out RAM so that something other than Amiga's could be developed. Like an X16 type computer using a 68000 instead of the 6502/10. Very happy with my 1.91.

I'm still not clear on how a stock 16mhz 68EC000 can be clocked at 60mhz without overheating and with no heat sink or even a fan on it. Is this a special 68EC000?

@ChrisEdwardsRestoration any update on the Vampire V2 working with the Minimix ITX board? I have got a piStorm and TF536 up and running, BUT I get a solid blue screen out of VGA when I attach a V2. Hopefully, I'm just doing something wrong and you have it figured out?!? Thanks.

I am putting up a massive amount of Amiga stuff on ebay today. Video toaster, 2000 HD with turbo, editing decks and boxes of software and manuals.

My first PC was an Amiga 1000, I still love Amiga.

How can I get in touch I have Amigas that need help 😢😢

There is a guy taking the source and working on something called MIGSTORM ITX, a lower cost version of the Minimig ITX spec. It is in testing now but for folks that complain about the price you could wait until someone makes a cheaper version. But thanks to these guys for making it happen in the first place.

Hi Chris. I bought the Minimig on foot of your recommendation. It is expensive, but would be worth it if I could get it working properly. I only have an AOC monitor which will display the workbench screen but tells me the input is not supported. Also, none of my input devices work properly. My Amiga mouse wont move the cursor and I only have a USB mouse and keyboard to use through PS2 to USB adapters, but these don't work at all. So I have a display that I can't interact with. There is not much out there on setting up the Minimig. I would appreciate any help I can get. :)

I believe you meant an SD card - compact flash doesn't come in a micro format. Compact Flash is still used in some cameras and older devices like early millennium handhelds/laptops/netbooks & late, late 20th century computers with card readers for them.
This new board sounds awesome and I sure do miss my 1990s Amiga 500 and use to salivate over ads for 2000, 3000 and 4000 Amigas. Alas I was overcome by the build your own PC bug in the mid 90s and have rarely looked back till now! Thanks, this so cool!

I`ve done some clumsy emulation of beloved amigas to replicate / relive a few quick amiga experiences that I fondly remember.. and I`ve dreamed of having a set up like my old a1200 (and never got to use a4000 that i never actually got to use before having to sell).. this kit you`ve shown here Chris is absolutely beautiful, thanks .. I so want what you`ve shown.. I would definitely get back into serious amiga use with the kind of performance you`re doing here.. thanks, great vid, great kit.

I would love to see this board shaped as a drop in to an Amiga 500 case. If you have any influence with the manufacturer suggest it. I don't want to deal or build a Re-Amiga board. If they could shape their board, that would be great.

I got to have one of these..

Hi. Just found this video. Where is the Dell monitor repair video? Can't find it in the channel.

Chris, Where do you connect a floppy or gotek please?

Nice one!

AGA support and I'm sold 😊

I hate to sound like everybody else, but man, that’s sweet. I ordered one as well. I have a Mega Midget Racer 030 / 40 from back in the day. Can’t wait.

Also, just FYI I just got my ship notification on the Pistorm and Pi32 lite from your previous videos from Amiga kit.

Really looking forward to this, love the 15/30 KHz switch and support for the dip. Truly worth it and I can put this in a cool case to boot!

Thanks Chris…good stuff man.

want one

It sounded like you said terrible fireworks 😂

So, why would you insist in keeping this old technology alive, (no offense just curious 🤨)

Chris, WIll it run a Vampire V2 A500?
I figure probably not due to the location of the socket.
Maybe with the correct CPU relocator

Wow!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Getting better all the time.
Is Renee working on this for the Buffee or has the Buffee bled out?

Where is the Hellraiser Cube screensaver from Linux or Windows? I have seen this in a few videos but I never asked.

Just wondering how that CF card is mounted on top of the TF536 like that? Is that an updated version of the TF536? Since mine just has a pin header on the edge.

The 68SEC000 board should have 8MB of Fast RAM on board already.

Really Cool Hardware🤩👍🏻

A want this device with black solder mask instead of red, a true MiniNig

I can't see the point in it ..May as well you pc emulation

Great video as always. All we need now is a Zorro slot on it and that will provide bigbox card support. Also I wonder how well the CPU’s would sell on their own. I would buy one.

Nice upgrades I just got the previous version at the begining of the year I'll upgrade when they get to a 2.0 version with hopefully ATX power connector only, case front panel header, Basic HDMI, and USB IDE and a floppy would be nice too but can't have everything Mabybe in a couple more revisions

2023 1.97 rev and still only vga out ? c'mon !

is it limited to 4gb hdf files due to fat file system?

Pin one on the dip does have a silk screen arrow pointing to the edge