Seriously NEXT LEVEL - Bambulab X1 Carbon (3D printer)

ATTENTION! There seems to be someone answering your comments doing a fake giveaway in my name! THIS IS A SCAM AND NOT ME! Don't reply and don't send this person money for shipping!

i want one so bad but i don’t know if poor inner me will ever be okay with loosing that much filament to purging

The Printbet could only 110c im the EU Version if i am right

Prusa is in trouble 😅

"At this ridiculously low price" seriously? Compared to what? a car? I'm afraid you're a little tone deaf my friend. It seems like a great printer compared to the mostly garbage out there but there's not "low price" about it.

Lets be honest: Prusa should not cost around $1000. Outdated design, 3D printed part... when you pay such money you sponsor Joseph for his open source work for community. As result many people uses his work for free, Prusa sell less printers and because of that printer price is higher that it should be. BambuLab doesn't give anything back to community, they don't open source anything.

The X1 Carbon makes the Prusa look like it's from a bygone age... Of course looks aren't everything.

Stefan this is a very gutes Video Danke 😉👍

AT8236 vs TMCXXXXX thoughts?

I'm sorry but I'll not support China and neither should you or anybody else.

Hi Stefan,
geht das Video auch auf Deutsch?
Because I'm German and can't speak English

"Bambulab" hey ??? hmmm..."bamboula" means "negro" in french, just saying

hope to afford one day to get one of those printers. In regards to all the access wastage of plastic material especially when making a colour print, couldn't the printer print another model with the waste so at the end make the model someone requires an end up with a bonus separate toy ?

Realistically speaking you get a price premium just cuz. It's a 3-D printer but no printer should be that much more expensive than the ones. We already have the only thing that is added is a Z height.

This is a longshot but what filament rack parts are they? thanks,

What is that monster plant model called?

Were those catan game board pieces?

Just both mine on their Web site (X1C Carbon) :) Looking forward to receiving it and building stuff with it! :) Thank you also for this very informative and well-done video! Cheers!

I want one but according to reddit it has a lot of problems .people are stuck with printers with warped beds, faulty ams , extruders burning etc.
So it is a matter waiting or gambling

Hi Steffan :)
Würdest du sagen du würdest den Bambu Lab X1 Carbon empfehlen?
Mit einem Budget von ca. 1500€ - 2000€

When I think low price for a non-necessity i think like 100-200$ max 1000$ is very expensive for something that might not get used much by the average consumer.

I would like to see your update on Bambu X1 since it seem that they have updated a lot of things..

Thanks for this awesome review. You're the best.

Ive got one and its amazing... Had 2 mk3s, but now i rarely use them anymore because of the X1 carbon. Mostly if iam too lazy to take off the AMS for TPU. The X1 never failed me so far and its amazingly fast and accurate.

This was posted 8months ago, any update on a full current review of this printer?

I love what you are doing, and like always this was an awesome review.I like especially the material strength tests. I have a particular question if you cand help me. I work away from home, mostly 4 months away. I want an easy to use 3D printer reliable witch also my wife can use. I have an Anycubic Chiron but is not very consistent. I was thinking about Bambu Lab x1 Carbon (without AMS system) or Prusa i3 mk3S+. What you think. Thank you .

This will make 3 d printing even more mainstream, the LiDAR part is awesome, looks like excellent job, the time to start if it reduces failure will be great

Now I have heard it all. A German telling the Chinese that it is overengineered 🤔

Great details. I was trying to see where the WiFi signal reception on this machine is as after updating the latest firmware, my x1c suddenly can't find any WiFi networks, even a reset doesn't help.

I bought an Ender 3 v2 neo, I hate it so much, it’s been nothing bot problems and trouble got the past 3 months, I’m burning this stupid piece of trash and buying an X1C combo

Mine is shipping today. I already have a mk3s+. I'm excited for core xy, all metal hot end and the enclosure that i'll be able to isolate and dampen sound from. I don't care about the fastest speed but 2x faster than prusa at the same quality, I think thats worth it alone. The prusa is 100% awesome but it is an aging platform and IMO, I'm not happy with the 3 linear bearing system on the y axis. The "frog plate" loves to give off this annoying frequency if the print is too far from the center of the bed. small issue but im in the same room and it loves to resonate with my headphones. Thank you Murphy's Law. I've priced parts for a custom printer build and the precision ball screws i'd use cost 700$ alone... ramble over. Just my thoughts.

Can u make a video about the danger of 3d printers especially this ine cause its likely to be brought by many beginners.

Guten Tag

This is the kind of printer you should get for prusa prices. Sorry but the industry has caught up. I can get a sovol sv06 for $300. Even less when onsale. A prusa clone. 1000k+ for a prusa just isn’t it anymore.

Are you an half German

I like the bed that you don't to mess around with the springs under the bed from time to time. Ender beds suck

Danke für das sehr informative Video Stefan!!!
Ich bin aktuell auf RatRig und Voron unterwegs.
Finde den Bambu schon sehr interessant!!!
Was mich allerdings etwas nachdenklich macht, ist wie es auf Dauer mit der Haltbarkeit, Wartungstätigkeit und Ersatzteilbeschaffzng aussieht...
Mach weiter so!!!
Beste Grüße aus Österreich!!!

I seriously want this. What a nice machine!

Now to talk my wife into letting me get this…

Hallo Stefan, das war ein cooles Video. Ich habe den Drucker seit gestern, Setup ging super schnell, und als kompletter Neuling habe ich schon allerlei Zeugs gemacht - inklusive zu lernen, wie ich eigene Designs mit Fusion 360 baue und dann ausdrucke. Meine Tochter (10 Jahre) kommt ständig mit neuen Ideen und druckt ebenfalls ihre eigenen Sachen. Klasse Gerät, auch und gerade für Einsteiger.

Als Einsteiger habe ich ein paar Fragen: Von Bambulabs gibt es im Moment praktisch kein Filament zu kaufen, und auch sogar die Leerrollen sind ausverkauft. Ich habe Dein cooles Rack gesehen (gibt es dafür die STL Files?) - aber ich habe auch gelesen, dass bestimmte Filamente trocken gelagert werden müssen. Du siehst, typische Anfängerfrage. Was kannst Du da raten? Welches Filament, das man in Europa findet, kannst Du empfehlen - klar, wieder Anfängerfrage: Ich habe mit dem dabei liegenden, eher spröden PA-CF ein paar brauchbare Ausdrucke gemacht, und das ebenfalls mitgelieferte, etwas flexiblere PLA heftig verwendet. Ich suche Material, welches wie das PLA etwas flexibler, aber Wärmebeständiger, um allerlei Werkstücke zu machen, etwa kleine Kästen, Aufhänger, usw., in mehreren Farben. Es sollte sozusagen auch eine Spülmaschine abkönnen. Da ich Platz habe, plane ich, mir einen zweiten AMS daneben zu stellen.

Welches Material kannst Du empfehlen (s.d. auch die Rollen in den AMS passen)?

Danke vielmals!

Great dissection analysis, could you do a head to head benchmark against AnkerMake M5? I already own an M5 but am tempted to buy another Bambu

"not a single print release from the base" - curious, and you did not mention glue a single time.
I've heard other reviewers that prints released due to forgetting to glue...
Was hoping a heated bed eliminates the need of glue.

Can you share your settings for the catan tile prints? I am going to be doing that print soon myself and your results here looked fantastic!

I ordered a p1p knowing that'll be beat. It's exactly what I want. Just hoping the ams stays supported on future printers

wir nennen ihn aschenputtel. weil man die zehen abschneiden muss.
26 cm reichen nicht mal für sextoys, digga.

Does the print quality stands out for professional purposes like industrial prototyping? Or would you prefer an other printer for such high quality prints?

This is very interesting. Is there an update coming with the current state? Software update? AWS update to fit larger rolls? Have lots of Prusament rolls. 😕