Xbox FS2020: Setting up the Velocity One Flight From Scratch!

Anyone have issues of the trim wheel not working?... like not even detecting in the menu of MSFS or in the training setting on the controller.

Can you do a video on the proper way to set throttles for twin engine planes? Mine was working fine out of the box, but then ...all heck broke loose. A few friends have had the same issue, where all button assignments were dropped from the profile. on the Xbox Turtle Beach yoke system...some profiles even disappeareed.

how do you play with yoke visibility?

How do you jump back into the cockpit after selecting your buttons?

I'm trying to set up the velocity one to my flight simulator on gamepass and it won't see that their is the velocity one that is available to use I can only control with my Xbox controller

Hello sir i need some help with my setup. Plugged it in and its not working. Am i neccessarily supposed to do everything you did in the videos. Help ASAP! ♥️

Thanks mate

Hi! Thanks for this video, I’m new to flight sim and just picked up the V1. In regarding to the engine levers is this a general profile that will work for most aircraft’s? Or do I have to be specific and make different profiles for different types of crafts? (I.e # of engines etc)

THANK YOU for showing your sensitivity settings a big help to me. I think the factory setting were awfully sensitive making learning how to fly frustrating as a beginner.

Hi, is it possible to delete all the config and reinstall Velocity One from scratch? Thank you.

I was trying to set up my system for the first time today. One question, when you go from pilot position over the nose to normal position and then use your POV again it takes you into instruments. Does this mean that the last POV down (Next insturment view) toggles you into instrument view and POV up from there takes you out of instrument view. The fact that there is a toggle instrument view command suggests that you need to toggle in and out. Presumably this means that this toggle is done automatically when POV'ing down (and up) from pilot view to switch you in and out of instrument mode (very confusing)

Do you have a list of this setup?

Thanks mate, this video has realy helped me massively

Excellent! Sorry you had to do all of this but we have all benefitted .. Thank You!

Thanks for this video. I will save it just incase I have to set it up from scratch again.

Did you by any chance make a video of these settings for the pc? I recently got mine yesterday and have been trying to set my controls up before I start flying with it. Thanks so much for your videos by the way, they are really helpful.

It would be great if you could do a similar YT for the new Honeycomb XPC Alpha, the Bravo (which currently is not fully operational with the Xbox …sound familiar Asobo?) and the Logitech pedals (which is better IMO than Charlie) but it’s brakes don’t work. I asked Honeycomb to do the right thing and send you the XPC Alpha, Bravo & hub! Your Xbox support would be greatly appreciated!

Thanks for your usual great tutorial. Fortunately my update didn’t wipe out the basic settings but your info allows me to reset the basics to your more informed choice. As an aside i just received the new honeycomb xpc Alpha and the hub! Yes actually received this 2 days after release. I look forward to setting it up with the Xbox Series X! BUT The Bravo lights don,t work. A known HC issue. Blame MSFS/Aero! Sound familiar. While the lights don’t work the bravo does although the control assignment is hopeless. Unlike V1 Alpha,Bravo and Charlie show as one controller. None of the controls are labeled!!, HC US / Canada do not appear to be helpful ….yet… Time wil tell. I wonder HC Eutope or U will have any better support. I hope you have been able to purchase the new Alpha, Bravo and hub and give us the benefit of your experience please consider setting up a patron so we can donate to your $$ overhead. How best to contact you to cover some of my current discoveries.

Hello Mr. Huddison, as always, this is a great video. I wanted to ask you something that is off topic, please help. I want to upgrade my video card. At this moment I have a Radeon RX 590 with 8 RAM. I wanted to buy a NAVIDIA RTX 3080 is it worth it or do you recommend something better? I only have $1,000 to spare. I have an AMD Ryzen 7 3700X 8core processor and 32 G of RAM. If anyone of your followers have an impute, it is welcome.

Hi, To anyone who can help me. I am running Turtle Beach Controller.V1.33. All up to date has been working fine. As of yesterday my system gets stuck on SYNC when loading and goes no further. Have done all sim updates. Any ideas to get me past this point?? Quite a mystery. Thanks Adrian ( Australia)

I had an issue of SIP not working after FW update 1.3.3. I found that you need to -- 'activate SIP_FP001 in the Yoke´s settings'. Once I did that SIP works as advertised. I did not lose any of my profile settings yet (smile).......

Another cracking video. I have a couple of different settings - I use the same button you have for brakes for left brake and the one on the right for right brakes so I have independent braking 👍

I did not loose my profiles, the yoke is fully functional but I have to disconnect and reconnect the VF1 form my pc to get the throttle and buttons to work. Hope that TB puts out a firmware update out pretty soon.

Many thanks ,
I have no clue why the trim wheel is not moving , yes Im using the pc version setup and I'm switching between them but not giving any signal that it functions
If you have any clue please share with us
Thanks
By the way we truly miss your technique setting up VR its a loss for us

been lucky with my SU10 so far only had to put the aircraft back in and all settings were in the cloud I beleive however my graphic settings were default so used Simhanger and Huddison educational videos to get things all sorted.

i did the update on my v1 and yea all my settings still good ,the only thing is my alt light stays on all the time . do you know why?

THANK YOU, THANK YOU, THANK YOU 👍👍👍

Seems to be lots of different scenarios happening with this update. I was lucky enough to not lose all my v1 settings. But if I want to set Flap axis (0 to 100%) the bar that was there that shows you moving the for instance joystick l axis 7 has disappeared. Its the same for any axis that has a setting (0to 100%). Plus it still crashes, not so annoying as it loads faster. Also I had to reinstall the sim. As it would always crash back to dashboard as I was starting my flights. Thanks Huddison for all the work you put in to help us out. Much appreciated.

Great video once again. I was lucky enough not to lose any of my bindings, but all my sensitivity settings were lost. And now I find if I try to go into the sensitivity settings before the picture of the velocity shows up on the right hand side it shows no data so I have to wait a good 20 seconds After the picture has shown up and then I can enter sensitivity settings

Thank you for this. Mine is in for repair after last update and fear the same situation when it returns. I will hopefully get to use this video shortly. 👍👍👍On a side note, I've never seen so many issues due to an update in all my years of gaming.

Thx for these videos huddison you are a life saver. Just one question. My profiles are still intact and I notice the sensitivity settings on this video are slightly different to the ones you recommended 4 months ago and I was just wondering whether there has been a slight error or if these are the revised settings. No worries if you don't get time to answer me I'll try them both anyways I was just curious. 🙂 Thx again.

Thanks Huddison. This is really helpful.

Another great vid buddy! Everybody remember to like, sub and share this with other pilots 👍🏼😃 fly safe everybody ✌🏼🛫

Seems like I was really lucky (so far...) not to lose all of MY profiles. I have about 8-10 setups, grouped into plane types, plus a detailed keyboard profile.
I would have been mightily p!55ed off to have lost them.
The ability to back them up within the VF app would be great.

Here we go again... Simmers need patience more than anything. Thx a lot for your help all this time!!